AVIXA Certified Technology Specialist - Installation - CTS-I Exam Practice Test

A. red, blue, and white

B. red, blue, and yellow

C. red, blue, and black

D. red, blue, and green

A. Multimode cables send the signal quicker than single-mode cables

B. Multimode cable does not have limited bandwidth

C. Multimode disperses the signal into many light paths

D. Multimode uses yellow cable jackets

A. PPM

B. lux

C. VU

D. PDP

A. The amount needed for purchasing the materials and supplies

B. The amount of labor and materials the project manager has allocated to complete the project

C. The actual cost of labor and materials used to complete the project

D. The total amount that the client has paid the AV company for the project

A. Audio equipment is heaviest and should be at the bottom of the rack.

B. Signals flow down, not up.

C. This helps protect the signals against induced noise.

D. Logical groupings of equipment are easier for the user.

A. The customer can easily step in and use the Touch Panel with little explanation

B. The customer requires intensive training on the operation of the Touch panel

C. The customer thinks the panel looks cool

D. The customer wants only a few changes

A. Identifying each end of a cable in a bundle

B. Determining if a circuit uses AC or DC power

C. Identify the type of a specific cable

D. Determining how long a cable run is

A. The door could pinch the cables.

B. The swing-out door could jam in the carpet.

C. The door gets in the way of mounting the equipment.

D. The door may require installation before mounting the equipment.

A. Frequency coordination

B. Using lavalier microphones

C. Using infrared wireless microphones

D. Multiple receivers all tuned to the same frequency

A. Frame rate

B. Aspect ratio

C. Refresh rate

D. Signal-to-noise ratio

A. 204kg (450lb)

B. 122kg (270lb)

C. 41kg (90lb)

D. 82kg (180lb)

A. Grade 5 bolts

B. Post-tension cables

C. Wood blocking

D. Poured pan concrete