Oracle SPARC M6-32 and SPARC M5-32 Servers Installation Essentials - 1z1-489 Exam Practice Test

A. In the case of rpool, the disks need to be sliced. It is recommended to have only a single slice of the full disk size used by ZFS on the although a small slice can be allocated for non-ZFS use (for example, SVM metabd).

B. Always create mirrored pools, even if the controller provides H/W -based RAID. ZFS needs to be able to correct the data if it detects corruption.

C. If you ADD a disk to mirror the root pool, you must also manually perform aninstallboot or installgrub on that disk to make it bootable. If the root pool is initially created as a mirrored pool, this is not necessary.

D. For non-root pools, you must partition the disk and assign slices to various partitions.

E. If the controller provides H/W-based RAID, then it is not necessary to create mirrored pools.

A. If the server is not completely populated with components, cover the empty sections with filler panels.

B. Allow a minimum clearance of 36 inches (914 mm) at the front and the rear of the server for ventilation.

C. It is strongly recommended that you use cooling by ceiling vents because airflow is stronger.

D. Manage cables to minimize interference with the server exhaust.

E. It is strongly recommended that you use cooling by a raised floor with perforated tiles in front of the server to supply cold air, because airflow is more evenly distributed.

A. show /snapshot

B. show /SYS/diag/snapshot

C. show /SP/snapshot

D. show /SP/diag/snapshot

A. Do not install the patch unless instructed to do so by an EIS Alert.

B. Delay installation until the updated patch is published to the EIS-DVD.

C. Never install patches outside of the EIS- DV

D. Always install the most recent version of patch.

A. Half of the 36x fan modules are located on the front and the other half on the rear. 18x fan modules are in front fan cages and 18x fan modules are in back fan cages.

B. All 36x fan modules are located on the front, 16x fan modules in upper fan cages, 16xfan modules in lower fan cages, and 2x fan modules on each side (left and right next to the SP/SSB).

C. All 36x fan modules are located on the front, 12x fan modules are In upper fan cages, 12x fan modules are in middle fan cages, and 12x fan modules are in lower fan cages.

D. 36x fan modules are located on the front and rear; 12x fan modules are in front fan cages, 12x fan modules are in back middle fan cages, and 12x fan modules are in back lower fan cages.

A. /System/DCUs/DCU_2 cpu- summary

B. /System/Processor type

C. /Servers/PDomains/PDoma1n_2/System/Processors summary- description

D. /Servers/DCU_2/Processors model

A. 2

B. 8

C. 4

D. l

A. ASR Manager

B. MOS

C. ASR Client

D. SP