300-615 by Cisco Actual Free Exam Questions And Answers

Question 1

Refer to the exhibit.

The EEM script is applied in the default VDC to collect the outputs during high CPU utilization on the Cisco Nexus 7000 Series Switch for all VDCs. Which configuration set must be added to the script to fix the issue?

A. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry- val 50 poll-interval 1 switch(config-apple)# action 0.2 cli enable switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution

B. switch(config-apple)# event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry- val 50 poll-interval 1 switch(config-apple)# action 0.2 cli config t switch(config-apple)# action 0.5 cli switchto vdc Core switch(config-apple)# action 0.8 cli switchto vdc Distribution

C. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val
50 poll-interval 1
switch(config-apple)# action 0.2 cli config t
switch(config-apple)# action 0.5 cli switchto vdc Core
switch(config-apple)# action 0.8 cli switchto vdc Distribution

D. switch(config-apple)# event snmp 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op ge entry-val
50 poll-interval 1
switch(config-apple)# action 0.2 cli enable
switch(config-apple)# action 0.5 cli switchto vdc Core
switch(config-apple)# action 0.8 cli switchto vdc Distribution

Discussion 0

Correct Answer: A Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 2

Refer to the exhibit.

The OTV overlay is deployed in multicast mode. After an unexpected reload of N7K-SITE1-OTV1, the network administrator observed that on N7K-SITE1-OTV2 the OTV site adjacency went into the partial state.
Which
action resolves the issue?

A. Configure the Site-Identifier on N7K-SITE1-OTV1 to 0002.0002.0002.

B. Change the Site-VLAN on N7K-SITE1-OTV2 to VLAN 1.

C. Modify the multicast data-group on N7K-SITE1-OTV1 to match N7K-SITE1-OTV2.

D. Enable IP IGMP version 3 on the join interface on N7K-SITE1-OTV1.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 3

Refer to the exhibit.

An EEM applet must be used to run a Python file called " Config " that enables all administratively disabled interfaces. The script fails to run as expected. Which command resolves the issue?

A. action 1.0 cli local tclsh Config

B. action 1.0 cli local tclsh Script_1

C. action 1.0 cli local python Script_1.py

D. action 1.0 cli local python Config.py

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 4

An engineer attempts to register Cisco UCS Manager to Cisco UCS Central, but the registration fails. The engineer can ping Cisco UCS Central from UCS Manager. Which two actions must the engineer attempt to resolve the problem? (Choose two.)

A. Place Cisco UCS Manager on the same subnet as Cisco UCS Central.

B. Allow port 9443 between Cisco UCS Manager and Cisco UCS Central.

C. Apply the UCS Central license to UCS Central.

D. Synchronize the date and time to NTP for Cisco UCS Central and the Cisco UCS domains.

E. Allow port 443 between Cisco UCS Manager and Cisco UCS Central.

Discussion 0

Correct Answer: D,E Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 5

An engineer experiences an issue presented with the Cisco ucs system. Which action resolves the issue?

A. Reboot the blade server and acknowledge the fault.

B. Update the 1/O module firmware on the Cisco UCS chassis.

C. Change the discovery policy backplane speed preference to 4x10G.

D. Connect the adapter to the fabric interconnects using a breakout cable.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 6

Refer to the exhibit.

The scheduler job fails to run. Which action resolves the issue?

A. Change the TFTP server address.

B. Configure the RBAC authentication.

C. Change the file name.

D. Configure the authentication credentials.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 7

An engineer is implementing a new BGP peering in their new data center. The engineer set up the BGP session that peers with the remote end. As soon as the BGP peers attempt to exchange routing prefixes, one of the BGP peers drops the connection. After reviewing the configuration, the engineer reviews the logging messages. The engineer discovers that the router is missing keepalives from the remote end and terminates the session. Which action resolves the issue?

A. Configure the matching BGP AS numbers between the peers

B. Set the higher values for the BGP keepalive and hold-down timers on both peers

C. Configure the matching BGP passwords between the peers

D. Set the bgp transport path-mtu-discovery attribute on both peers

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 8

A customer configures HSRP between two data centers that are interconnected with OTV. The configuration succeeds, but traffic between two ESXi virtual hosts on the same site is routed suboptimally through the OTV overlay. Which two actions optimize the traffic? (Choose two.)

A. Disable first-hop redundancy.

B. Filter HSRP by using a Layer 2 MAC-list on the OTV edge devices.

C. Filter HSRP traffic by using a Layer 3 VACL on the ESXi vSwitch.

D. Filter HSRP by using a Layer 2 MAC-list on the ESXi vSwitch.

E. Filter HSRP traffic by using a Layer 3 VACL on the OTV edge devices.

Discussion 0

Correct Answer: A,E Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 9

A host connected to port Eth0/1 on the Cisco Nexus Series Switch received this error
*Mar 6 12 57 42 882 %PM-4-ERR DISABLE psecure-violation error detected on Eth0/1, putting Eth0/1 in err-disable state-Mar 6 12 57 42 882 %PORT_SECURITY-2-PSECURE_VIOLATION Security violation occurred, caused by MAC address a526 cc69 3503 on port EthernetO ' 1.
The server administrator concluded that the issue was caused by plugging the host in the wrong switch port and fixed the problem Which action must be taken to recover the port from the error?

A. Change the interface Eth0/1 mode to access

B. Install ENHANCED_LAYER2_PKG license

C. Enable NET\V0RK_SERV1CES_PKG license.

D. Shut and no shut the interface Eth0/I.

Discussion 0

Correct Answer: D Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Question 10

Refer to the exhibit.

A network engineer finds one of the fabric interconnects offline when connecting L1 and L2 ports on both fabric interconnects. Which action resolves the issue?

A. 1. Connect to Fabric Interconnect B.
2. Verify the cluster status and HA election.
3. Validate Fabric Interconnect B hardware issues.

B. 1. Connect Fabric Interconnect B and change the role to primary.
2. Reboot Fabric Interconnect B.
3. Add the Fabric Interconnect A as subordinate fabric to the cluster.

C. 1. Connect Fabric Interconnect B and execute "Erase configuration"
2. Reboot Fabric Interconnect B.
3. Add the subordinate Fabric Interconnect to the cluster.

D. 1. Connect to Fabric Interconnect A.
2. Verify the cluster status and HA election.
3. Validate Fabric Interconnect A hardware issues.

Discussion 0

Correct Answer: C Vote an answer

Explanation: Only visible for Fast2test members. You can sign-up / login (it's free).

Cisco Troubleshooting Cisco Data Center Infrastructure - 300-615 Exam Practice Test

Contact Us

Useful Links

Latest Updated