Cisco Installing Cisco TelePresence Video Immersive Systems - 500-005 Exam Practice Test

A. Choose Specify in the Use Configuration TFTP Servers entry.

B. Option 443 ip <ip_address> must be defined in the DHCP server.

C. Choose Configuration > IP Settings. Change the DHCP setting to No.

D. Option 150 ip <ip_address> must be defined in the DHCP server.

E. Choose Configuration > IP Settings. Change the DHCP setting to Yes.

F. Choose Automatic in the Use Configuration TFTP Servers entry.

A. configures the Active Collaboration data display

B. powers on and off the Active Collaboration data display

C. displays a test pattern on the Active Collaboration screen

D. changes the Active Collaboration data display from 5 to 30 f/s or 30 to 5 f/s during a call

A. The image name should be specified under the phone load that was filed in the device configuration.

B. The image name should be specified in the Cisco TelePresence System Administration configuration screen under Unified CM Settings.

C. The TFTP service was not restarted.

D. The image name is incorrect; it is missing the .cop.sgn extensions.

E. The image name is incorrect; it is missing the .cop extension.

A. room temperature

B. viewing angles

C. display frequency

D. display type

E. room lighting temperature

A. the projector

B. the primary codec AV input controls

C. the yaw of the camera cluster

D. the lighting fixture power

E. the room HVAC controls

F. the PTZ camera controls

G. the LCD settings