6006.1 by Avaya Actual Free Exam Questions And Answers

Question 1

A customer has Avaya IP phones located at a remote site connected via a remote link. The end users complain that intermitterently there is no audio or only one way audio when on a call. The customer limited the UDP port range in their routers to be 5000 to 6000.
Which command in the Avaya S87xx Server is used to find the UDP port range?

A. Status ip-network-map

B. Display ip-network-region

C. Status station

D. Display system-parameter ip

Discussion 0

Correct Answer: B Vote an answer

Question 2

Which Ethernet port on the S8730 server is used for server duplication when using the hardware duplication feature (DAL 1 or DAL 2 card)?

A. Ethernet 0

B. Ethernet 2

C. Ethernet 3

D. Ethernet 1

Discussion 0

Correct Answer: C Vote an answer

Question 3

Which command is used to tell at what time a spontaneous interchange has taken place?

A. Status health

B. List history

C. List usage

D. Display initcause

Discussion 0

Correct Answer: D Vote an answer

Question 4

A user would like to see a list of number of registered IP endpoints with TCP signaling sockets established for each CLAN or processor Ethernet.
Which command would be used?

A. List ip interface clan

B. List measurable clan sockets

C. Status socket-usage

D. Status clan-ip location

Discussion 0

Correct Answer: C Vote an answer

Question 5

A customer would like to have an additional menu language available for the 9630 phones.
Which statement describes what has to be done to provide this language?

A. The menu language file is on the phone's file server. The local display language parameter has to be activated in the 46xx settings bd file. Reboot the affected phones.

B. A multi-language firmware package must be loaded into the 9630 phones. Provide this package on the phone's file server for download. Reboot the affected phones.

C. Change the parameter display language in the station's form to user-defined. Reboot the affected phones.

D. Go to the 9630 phone menu settings and enable the parameter Multilanguage support. Reboot the affected phones.

Discussion 0

Correct Answer: B Vote an answer

Question 6

After the installation is complete several users are complaining that they cannot dial an external number. The trunks have been verified to be in service.
Which could cause this problem?

A. Call activation in COS is set to "NO"

B. Trunk-to-trunk transfer has been turned off.

C. The COR is outward restricted.

D. The phones have not been assigned console permission.

Discussion 0

Correct Answer: C Vote an answer

Question 7

A technician is testing calls from IP phones at a remote location on a G450/LSP to main location served by S83XX/G450 over the WAN. Busy tones are received when multiple calls between the two locations are already active. The network regions and G 711 and G 729 codec set have been set up.
Which two steps must be taken to ensure the branch IP phones are using the minimum WAN bandwidth when calling main location stations? (Choose two)

A. Create a third codec Set and assign to the G450 gateway in IP-network-region 2 form.

B. Assign branch IP phones to the G450 LSP as its call server in IP-network-region-2 form.

C. Assign G.729 as primary codec in station form for the branch IP phones.

D. Verify calls between NR1 and NR2 use G729 codec in IP-network-region 1 form

E. Use the IP-network map form to assign the branch IP phones to network region 2.

Discussion 0

Correct Answer: C,E Vote an answer

Avaya Aura(TM) Communication Manager (R5.2.1) Implementation - 6006.1 Exam Practice Test

Contact Us

Useful Links

Latest Updated