Cisco Implementing Cisco Connected Physical Security 1 - 648-238 Exam Practice Test

A. VSVM

B. VSMS

C. Direct from the camera to the workstation

D. VSOM

E. First VSMS and then through the VSOM server

A. Map Centric view, Camera Centric view, Alarm Centric view, Event Centric view

B. Map Centric view, Camera Centric view, Alarm Centric view

C. SASD views are fully customizable and as such there is no predefined viewing option.

D. Alert Centric view, Map Centric view, Camera Centric view, Video Centric view

A. When the video stream is viewed on multiple operator workstations, the network is taxed only with single multicast stream.

B. Multicast configuration on switching and routing infrastructure is less complex than the configuration for unicast traffic.

C. Multicast is not supported in the Cisco Video Surveillance solution.

D. You can configure one camera to stream to two media servers at the same time, for data redundancy purposes.

A. Media Experience Engine

B. Cisco Discovery Protocol

C. Videoscape

D. Medianet

A. The Cisco VSM services on the server must be restarted.

B. The server should be rebooted.

C. Media storage partitions were not created in the virtual machine.

D. There was an issue with the import of the OVA image. The image should be reimported, new virtual hard drive should be added, and /media# directory created.

A. 5 x VSOM virtual servers 20 x VSMS virtual servers 2,500 x cameras

B. 3 x VSOM virtual servers 15 x VSMS virtual servers 2,000 x cameras

C. 4 x VSOM virtual servers 16 x VSMS virtual servers 2,000 x cameras

D. 2 x VSOM virtual servers 18 x VSMS virtual servers 2,000 x cameras

E. 1 x VSOM virtual servers 20 x VSMS virtual servers 2,000 x cameras

A. Aspect ratio of full HD and megapixel cameras is the same.

B. Megapixel cameras generally have higher frame rate than full HD cameras.

C. Resolution of full HD cameras is known, whereas megapixel cameras can vary.

D. Megapixel cameras can have higher resolution than full HD cameras.

E. Megapixel camera resolutions are common among different camera vendors.

A. Implement inter-VLAN routing.

B. Implement "router-on-a-stick".

C. GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command.

D. The link between GigE 0/5 and FE 1/1 should be configured as a trunk port.

E. GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command.

A. 8 TB

B. 20 TB

C. 10 TB

D. 4 TB

A. Progressive scan video is generally better with fast-moving objects

B. Progressive scan video is constructed out of alternating odd and even lines

C. Interlaced video is generally better with fast-moving objects

D. Interlaced video is constructed out of alternating odd and even lines

A. CIVS-MSP-4RU only

B. CPS-MSP-1RU-K9 only

C. CPS-MSP-2RU-K9 only

D. CPS-MSP-1RU-K9, CPS-MSP-2RU-K9, and CIVS-MSP-4RU

A. Workstations must be purchased from Cisco. No other options are supported.

B. The Workstation Profiler tool should be run to test each scenario.

C. The specifications must match Cisco recommendations exactly.

D. As long as the workstation runs Windows, it can display video streams.

A. Cisco SRE 910 running UCS Express on ISR G2 routers

B. VMware vSphere (ESXi)

C. Cisco Physical Security MSP servers

D. Cisco SRE 700 running UCS Express on ISR G2 routers

E. Citrix XenDesktop

F. Microsoft Hyper-V

A. Camera capacity cannot be calculated, and must be configured on site.

B. Camera capacity should be calculated by the aggregate bit rate of all video streams, both inbound and outbound, on a media server.

C. Cisco UCS Express can handle up to 32 cameras, CPS-MSP-1RU-K9 can handle up to 64 cameras, the CPS-MSP-2RU-K9 can handle up to 200 cameras, Cisco UCS C-Series can handle up to 1000 cameras, and Cisco UCS B-Series can handle up to 1000 cameras per blade.

D. Camera capacity should be calculated by the maximum storage space on the media server when configured with full HDD utilization.