Huawei Certified Datacom Associate-Huawei Networking Technology and Device (HCDA-HNTD) - H12-211 Exam Practice Test
Which of the following ACLs cannot match network layer information?
Correct Answer: A
Vote an answer
Segment routing (SR) is a protocol designed based on ( ) to forward data packet on a network
Correct Answer: A
Vote an answer
How many TCP connections will be established when FTP is used to transfer files?
Correct Answer: A
Vote an answer
Packet forwarded between two routers do not carry VLAN tags?
Correct Answer: A
Vote an answer
According to following configuration , R1 And R2 are connected through low speed serial cables and PPP is used to encapsulate data link layer packets? When the hold down value of R1 & R2 are different, ppp negotiation and communication fails?
Correct Answer: A
Vote an answer
The MAC address table of a switch is as follows. The switch receives a data frame whose Source Mac address is 5489-989d-1d30 and destination MAC address is 5489-9811-0b49. Which of the following statement is true?
[Huawei]display mac-address MAC address table of slot 0:
------------------------------------------------------------------------------- MAC Address VLAN/PEVLAN CEVLAN PortTypeLSP/LSR-ID VSI/SIMAC-Tunnel
-------------------------------------------------------------------------------
5489-9885-18a8 1---blackhole - 5489-9811-0b49 1--Eth0/0/3static - 5489-989d-1d30 1--Eth0/0/1dynamic 0/-
------------------------------------------------------------------------------- Total matching items on slot 0 displayed = 1
[Huawei]display mac-address MAC address table of slot 0:
------------------------------------------------------------------------------- MAC Address VLAN/PEVLAN CEVLAN PortTypeLSP/LSR-ID VSI/SIMAC-Tunnel
-------------------------------------------------------------------------------
5489-9885-18a8 1---blackhole - 5489-9811-0b49 1--Eth0/0/3static - 5489-989d-1d30 1--Eth0/0/1dynamic 0/-
------------------------------------------------------------------------------- Total matching items on slot 0 displayed = 1
Correct Answer: C
Vote an answer
The Output of the "display ospf peer" command on a router is as follows. Which of the following statements are true?
[Huawei]display ospf peer
OSPF Process 1 with Router ID 10.0.2.2 Neighbors
Area 0.0.0.0 interface 10.0.12.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 10.0.1.1Address: 10.0.12.1 State: Full Mode:Nbr is Master Priority: 1 DR: 10.0.12.2 BDR:
10.0.12.1 MTU: 0
Dead timer due in 40 sec
Retrans timer interval: 5 Neighbor is up for 00:00:09 Authentication Sequence: [ 0 ]
[Huawei]display ospf peer
OSPF Process 1 with Router ID 10.0.2.2 Neighbors
Area 0.0.0.0 interface 10.0.12.2(GigabitEthernet0/0/0)'s neighbors
Router ID: 10.0.1.1Address: 10.0.12.1 State: Full Mode:Nbr is Master Priority: 1 DR: 10.0.12.2 BDR:
10.0.12.1 MTU: 0
Dead timer due in 40 sec
Retrans timer interval: 5 Neighbor is up for 00:00:09 Authentication Sequence: [ 0 ]
Correct Answer: A,B,D
Vote an answer
The DHCPv6 server also provide configuration information such as the DNS server address for hosts?
Correct Answer: B
Vote an answer