Free trial before buying

GB0-371-ENU study materials provide free trial service for consumers. If you are interested in our study materials, you only need to enter our official website, and you can immediately download and experience our trial question bank for free. Through the trial you will have different learning experience on GB0-371-ENU exam guide , you will find that what we say is not a lie, and you will immediately fall in love with our products. As a key to the success of your life, the benefits that our study materials can bring you are not measured by money. GB0-371-ENU test torrent: Constructing H3C High-Performance Campus Networks can not only help you pass the exam, but also help you master a new set of learning methods and teach you how to study efficiently, our study materials will lead you to success.

Only 20-30 hours learning before the exam

In peacetime, you may take months or even a year to review a professional exam, but with GB0-371-ENU exam guide, you only need to spend 20-30 hours to review before the exam, and with our study materials, you will no longer need any other review materials, because our study materials has already included all the important test points. At the same time, GB0-371-ENU study materials will give you a brand-new learning method to review - let you master the knowledge in the course of the doing exercise. There are many people who feel a headache for reading books because they have a lot of incomprehensible knowledge. At the same time, those boring descriptions in textbooks often make people feel sleepy. But with GB0-371-ENU test torrent: Constructing H3C High-Performance Campus Networks, you will no longer have these troubles.

Whether you are a newcomer or an old man with more experience, GB0-371-ENU study materials will be your best choice for our professional experts compiled them based on changes in the examination outlines over the years and industry trends. GB0-371-ENU test torrent: Constructing H3C High-Performance Campus Networks not only help you to improve the efficiency of learning, but also help you to shorten the review time of up to several months to one month or even two or three weeks, so that you use the least time and effort to get the maximum improvement.

DOWNLOAD DEMO

Mock examination function

The contents of GB0-371-ENU study materials are all compiled by industry experts based on the examination outlines and industry development trends over the years. It does not overlap with the content of the question banks on the market, and avoids the fatigue caused by repeated exercises. GB0-371-ENU exam guide is not simply a patchwork of test questions, but has its own system and levels of hierarchy, which can make users improve effectively. Our study materials contain test papers prepared by examination specialists according to the characteristics and scope of different subjects. Simulate the real Constructing H3C High-Performance Campus Networks test environment. After the test is over, the system also gives the total score and correct answer rate.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. The IP address of the host PCA is 40.1.1.1 and the MAC address is 0011.1111.11, which is connected to the GigabitEthernet 1/0/1 port of the switch. The following commands are configured on the switch:
[H3C]vlan 10
[H3C-vlan10]quit
[H3C]vlan 20
[H3C-vlan20]protocol-vlan ipv4
[H3C-vlan20]quit
[H3C]vlan 30
[H3C-vlan30]quit
[H3C]mac-vlan mac-address 0022-2222-2222 vlan 30
[H3C]vlan 40
[H3C-vlan40]ip-subnet-vlan ip 40.1.1.0 255.255.255.0
[H3C-vlan40]quit
[H3C]interface GigabitEthernet 1/0/1
[H3C-GigabitEthernet1/0/1]port link-type hybrid
[H3C-GigabitEthernet1/0/1]port hybrid pvid vlan 10
[H3C-GigabitEthernet1/0/1]port hybrid vlan 10 20 30 40 untagged
[H3C-GigabitEthernet1/0/1]port hybrid protocol-vlan vlan 20 0
[H3C-GigabitEthernet1/0/1]port hybrid ip-subnet-vlan vlan 40
[H3C-GigabitEthernet1 /0/1 ]mac-vlan enable
After the configuration is complete, it can be judged that PCA will join

A) VLAN40
B) VLAN20
C) VLAN 10
D) VLAN30

2. The topology is shown in the figure, and the STP calculation is performed. The correct result is:

A) If the bridge priority of SWD is set to 0, port E0/2 of SWD will only receive configuration BPDUs and not send configuration BPDUs
B) If the bridge priority of SWD is set to 0, SWD will become the root bridge, and ports E0/1 and E0/2 are designated ports
C) SWD needs to determine the root port by comparing the ID of the port that receives the configuration BPDU
D) Since the root bridge ID, root path cost, designated bridge ID, and designated port are the same, the root port of SWD cannot be determined

3. Regarding the comparison of the calculation convergence of RSTP and STP, the correct statement is

A) Compared with STP, RSTP defines the edge port, which can make the port connected to the i machine quickly enter the forwarding state
B) If STP wants to shorten the convergence time, you can only configure a smaller ForwardDelay time, but it may affect the stability of the network
C) Compared with STP, RSTP defines a fast root port switching mechanism^ This can make Alternate quickly become a new root port
D) Compared with STP, RSTP defines the designated port fast switching mechanism, which can make the designated port quickly enter the forwarding state without waiting for twice the Forward Delay time

4. In the switching network as shown in the figure, VLAN10 is set as Isolate-user-vlan on the switch SWA, VLAN2 and VLAN3 are the Secondary VLAN of VLAN 10; VLAN2? VLAN20 is created on the switch SWB, and VLAN20 is set as Isolate-user-vlan , VLAN4 is the Secondary VLAN of VLAN20. After setting the IP address of each device as shown in the figure, which of the following statements is correct (choose one or more)

A) The PCA packet comes out of the GigabitEthem1/0/3 port of SWA and enters the GigabitEthem1/0/4 port of SWB without VLAN tag
B) When SWB accesses PCA, after the packet comes out of the GigabitEthem1/0/4 port of SWB, the VLAN Tag carried is VLAN20
C) SWB packets from GigabitEthernet1/0/3 of SWA come out of GigabitEthem1/0/1 without VLAN
D) The PCA packet enters from the GigabitEthe1/0/1 port of SWA, and the VLAN Tag carried after it exits the GigabitEthem1/0/3 port is VLAN 10

5. In the network as shown in the figure, the corresponding configuration is completed on the switch SWA, and the switch SWA and each PC have learned the corresponding ARP entry. The PCA visited the PCB and sent an ICMP request message, and the switch SWA forwarded this message to the PCB. When the source IP address of the packet is

A) 20.1.1.1
B) 20.1.1.2
C) 10.1.1.2
D) 10.1.1.1

Solutions: