Only 20-30 hours learning before the exam

In peacetime, you may take months or even a year to review a professional exam, but with GB0-381-ENU exam guide, you only need to spend 20-30 hours to review before the exam, and with our study materials, you will no longer need any other review materials, because our study materials has already included all the important test points. At the same time, GB0-381-ENU study materials will give you a brand-new learning method to review - let you master the knowledge in the course of the doing exercise. There are many people who feel a headache for reading books because they have a lot of incomprehensible knowledge. At the same time, those boring descriptions in textbooks often make people feel sleepy. But with GB0-381-ENU test torrent: H3C Large-Scale Routing Network Technologies V2.0, you will no longer have these troubles.

Whether you are a newcomer or an old man with more experience, GB0-381-ENU study materials will be your best choice for our professional experts compiled them based on changes in the examination outlines over the years and industry trends. GB0-381-ENU test torrent: H3C Large-Scale Routing Network Technologies V2.0 not only help you to improve the efficiency of learning, but also help you to shorten the review time of up to several months to one month or even two or three weeks, so that you use the least time and effort to get the maximum improvement.

DOWNLOAD DEMO

Free trial before buying

GB0-381-ENU study materials provide free trial service for consumers. If you are interested in our study materials, you only need to enter our official website, and you can immediately download and experience our trial question bank for free. Through the trial you will have different learning experience on GB0-381-ENU exam guide , you will find that what we say is not a lie, and you will immediately fall in love with our products. As a key to the success of your life, the benefits that our study materials can bring you are not measured by money. GB0-381-ENU test torrent: H3C Large-Scale Routing Network Technologies V2.0 can not only help you pass the exam, but also help you master a new set of learning methods and teach you how to study efficiently, our study materials will lead you to success.

Mock examination function

The contents of GB0-381-ENU study materials are all compiled by industry experts based on the examination outlines and industry development trends over the years. It does not overlap with the content of the question banks on the market, and avoids the fatigue caused by repeated exercises. GB0-381-ENU exam guide is not simply a patchwork of test questions, but has its own system and levels of hierarchy, which can make users improve effectively. Our study materials contain test papers prepared by examination specialists according to the characteristics and scope of different subjects. Simulate the real H3C Large-Scale Routing Network Technologies V2.0 test environment. After the test is over, the system also gives the total score and correct answer rate.

H3C GB0-381-ENU Exam Syllabus Topics:

H3C Large-Scale Routing Network Technologies V2.0 Sample Questions:

1. The following is the information that a router executes displanatpt address-mapping: From the above output, we can know that the host whose address is ________ accesses the host whose address is _______.

A) 13.10.25.1 2:17:6:24::1
B) 2:17:6:24::1 13.10.25.1
C) 2:17:6:24::2 13.10.25.1
D) 2:17:6:24::1 13.10.8.1
E) 13.10.8.1 2:17:6:24::2

2. In the topology shown in the figure, the following configurations are performed on RTA, RTB, RTC and RTD respectively:
RTA] ospf 1 router-id 1.1.1.1
RTA-ospf-1] area 0
RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTA-ospf-1-area-0.0.0.0] network 1.1.1.1 0.0.0.0
RTB] ospf 1 router-id 2.2.2.2
RTB-ospf-1] area 0
RTB-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255
RTB-ospf-1-area-0.0.0.0] network 2.2.2.2 0.0.0.0
RTB-ospf-1] area 1
RTB-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTC] ospf 1 router-id 3.3.3.3
RTC-ospf-1] area 1
RTC-ospf-1-area-0.0.0.1] network 192.168.2.0 0.0.0.255
RTC-ospf-1-area-0.0.0.1] network 3.3.3.3 0.0.0.0
RTC-ospf-1] area 2
RTC-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTD] ospf 1 router-id 4.4.4.4
RTD-ospf-1] area 2
RTD-ospf-1-area-0.0.0.2] network 192.168.3.0 0.0.0.255
RTD-ospf-1-area-0.0.0.2] network 4.4.4.4 0.0.0.0
Then the routes that can be learned on RTA are _____

A) 192.168.1.0/24
B) 4.4.4.4/32
C) 192.168.3.0/24
D) 192.168.2.0/24

3. In the IS-IS network as shown in the figure, RTA, RTB and RTC are configured as follows:
RTA]isis
RTA-isis-1]is-level level-1
RTA-isis-1]network-entit01.1111.1111.1111.00
RTA-isis-1]interface serial 2/0
RTA-Serial2/0]isis enable 1
RTA-Serial2/0]isis cost 1
RTB]isis
RTB-isis-1]is-level level-1
RTB-isis-1]network-entit01.2222.2222.2222.00
RTB-isis-1]interface serial 1/0
RTB-Serial1/0]isis enable 1
RTB-Serial1/0]isis cost 1
RTB-Serial1/0]interface Ethernet 0/0
RTB-Ethernet0/0]isis enable 1
RTB-Ethernet0/0]isis cost 1
RTC]isis
RTC-isis-1]is-level level-1
RTC-isis-1]network-entit01.3333.3333.3333.00
RTC-isis-1]interface Ethernet 0/0
RTC-Ethernet0/0]isis enable 1
RTC-Ethernet0/0]isis cost 1
RTC-Ethernet0/0]interface Ethernet 0/1
RTC-Ethernet0/1]isis enable 1
RTC-Ethernet0/1]isis cost 1
After the routes of each router are stable, the cost of the IS-IS route 192.168.3.0/24 on the RTA is ______.

A) 2
B) 1563
C) 30
D) 3
E) 20

4. In the topology shown in the figure, the following configurations are performed on the RTA and RTC respectively:
RTA-ospf-1] area 1
RTA-ospf-1-area-0.0.0.1] authentication-mode simple
RTA] interface GigabitEthernet0/0
RTA-GigabitEthernet0/0] ospf authentication-mode simple plain 12345
RTC-ospf-1] area 0
RTC-ospf-1-area-0.0.0.0] authentication-mode simple
RTC] interface GigabitEthernet0/0
RTC-GigabitEthernet0/0] ospf authentication-mode simple plain 54321
If RTB needs to establish neighbor relationship with RTA and RTC respectively, which of the following configuration needs to be performed on RTB?

A) RTB-ospf-1-area-0.0.0.0] authentication-mode md5 RTB-ospf-1-area-0.0.0.1] authentication-mode md5 RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication -mode simple plain 12345 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1] ospf authentication-mode simple plain 54321
B) RTB-ospf-1-area-0.0.0.0] authentication-mode simple RTB-ospf-1-area-0.0.0.1] authentication-mode simple RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication -mode simple plain 54321 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1] ospf authentication-mode simple plain 12345
C) RTB-ospf-1-area-0.0.0.0] authentication-mode simple RTB-ospf-1-area-0.0.0.1] authentication-mode simple RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication -mode simple plain 12345 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1] ospf authentication-mode simple plain 54321
D) RTB-ospf-1-area-0.0.0.0] authentication-mode simple RTB] interface GigabitEthernet0/0 RTB-GigabitEthernet0/0] ospf authentication-mode simple plain 12345 RTB] interface GigabitEthernet0/1 RTB-GigabitEthernet0/1 ] ospf authentication-mode simple plain 54321

5. The networking is shown in the figure. RTA, RTB, RTC, and RTD are located in the same AS 100, which runs OSPF and only publishes the loopback routes of each router.

Except the OSPF COST between RTB and RTC is 15, the OSPF COST of other interconnected links is 10.
At the same time, BGP protocol is running in the network, RTD is BGP route reflector of RTA, RTB, RTC, no iBGP neighbor is established between reflector clients, RTA and RTB will be directly connected to the network segment 1.0.0.0/24 Use the network command to import into BGP. Is the following statement correct?

A) Route 1.0.0.0/24 published by RTA is used on RTC, because the distance between RTA and RTC is shorter
B) If RTC adds iBGP neighbor relationship with RTA and RTB, it may cause BGP routing loop
C) The 1.0.0.0/24 route advertised by RTB is selected on the RTC, because RTD prefers the 1.0.0.0/24 route advertised by RTB
D) If RTD is configured with BGP equivalent route, RTC will learn 1.0.0.0/24 route of RTA and RTB at the same time

Solutions: