IBM AnyPlace Kiosk Models 5xx 7xx and 9xx Technical Mastery (P6040-015) - P6040-015 Exam Practice Test

A. a pair of glass panels, each having a thin metallic electrically conductive and resistive layer separated by a thin
space

B. a glass panel with a conductive coating on top and a polyester top sheet with a conductive coating on the bottom

C. a printed circuit board frame around the perimeter of the display; on two sides there are closely spaced LEDs, and
on the opposing two sides there are matching phototransistors

D. a glass panel where the sensor has a conductive coating on the front surface with wires connected to each corner; a
small voltage is applied to each of these four corners

A. 15 inch

B. 12 inch

C. 21 inch

D. 17 inch

E. 19 inch

A. with the system off, re-seat the DIMMS; power on the system

B. attach a USB CD drive containing the IBM Diagnostics for POS Systems and Peripherals; power on the system; follow
any corrective action, if necessary

C. power on the system and pay particular attention to POST; make sure to observe the LED blinking and one beep
emitting before the system powers up

D. refer to the start up sequence listed in the User's Guide; power on and note any differences

A. 80GB SATA II 3.5-inch hard disk drive

B. 1GB memory

C. ExpressCard slot

D. presence sensor

E. internal CDROM drive

F. tabletop mount

A. It allows the system memory to be expanded up to 4GB.

B. It allows the AnyPlace Kiosk to support 64-bit versions of Windows operating systems.

C. It doubles the amount of data sent from RAM to the CPU when matching SO-DIMMs are installed.

D. It allows the AnyPlace Kiosk to perform well in multitasking environments.

A. a screwdriver to loosen the captive screw on the hard disk drive door

B. a power cable for the 160GB hard disk drive

C. an M5 bolt to hold the hard disk drive bracket in place

D. a hard disk drive bracket

E. a data cable for the 160GB hard disk drive

A. six

B. four

C. five

D. two