Huawei HCIP-Datacom-Campus Network Planning and Deployment V1.5 - H12-841_V1.5 Exam Practice Test

A. The device automatically obtains its IP address and management platform address after power-on.

B. Automatically download and apply configuration files from the management platform.

C. Requires manual on-site configuration of device IP and management address.

D. The configuration file needs to be copied to the device via USB flash drive, which is inefficient .

E. No manual on-site configuration required, achieving " plug and play" functionality.

A. Deployment of a video content edge distribution network (CDN) (caching popular videos on nodes near branches)

B. Limit the number of simultaneous video requests by users to avoid network congestion.

C. Reduce the video content bitrate, sacrificing clarity for lower latency.

D. All video content is transmitted directly from the headquarters video server and is not distributed.

A. Check if the static routes of the CE device are configured correctly.

B. Check if the MPLS protocol is enabled on the P device.

C. Check if an MPLS LSP has been established between the local PE device and the remote PE device.

D. Check if the VPN instance has been created on the remote PE device.

A. Forward routes only within a single OSPF area, not across areas.

B. Disable OSPF and use static routes to connect different areas.

C. Connect different OSPF areas and pass inter-area routes (such as Type 3 LSA).

D. Only external AS routes (Type 5 LSA) are transmitted; inter-area routes are not transmitted.

A. Local Preference

B. MED

C. AS_PATH

D. Next Hop

A. display mpls lsp

B. Display IP routing-table

C. display bgp vpnv4 all routes

D. Display IP routing-table VPN instance [instance name]

A. The P device cannot identify the packet forwarding path and discards the packet.

B. Data packets are forwarded normally to the target PE device without affecting services.

C. The PE device automatically re-encapsulates the public network label before forwarding.

D. The CE device cannot receive data packets (VPN label missing).

A. Configure compliance checks

B. Device hardware resource threshold alarm

C. Network topology visualization

D. Link quality monitoring and alerts

A. IPv6 over IPv4 tunnel (only enables communication between IPv6 terminals)

B. DNS64 + NAT64 (Enables IPv6 access to IPv4 even without a public IPv4 address)

C. Close the IPv6 terminal and use IPv4 access instead.

D. IPv4/IPv6 dual-stack technology (requires the enterprise to have a public IPv4 address)