Juniper Data Center, Associate (JNCIA-DC) - JN0-281 Exam Practice Test

A. An interface that connects directly to powerful servers.

B. An interface that carries multiple VLANs.

C. An interface that carries high bandwidth.

D. An interface that carries excess traffic.

A. Member interfaces must all be allocated on the same PFE.

B. Member interfaces must all be allocated on the same chassis when using a Virtual Chassis.

C. The interface's duplex settings and link speed must be the same on all member interfaces.

D. The interface's MTU settings must match on all member interfaces.

A. bgp set neighbor

B. add bgp connection

C. set bgp peer

D. neighbor <IP_ADDRESS> remote-as <AS_NUMBER>

A. Local Preference

B. AS_PATH

C. Community

D. MED (Metric or Multi-Exit Discriminator)

A. All leaf devices must be configured in separate OSPF areas.

B. All spine devices must use the same router ID.

C. All leaf and spine devices must be the same model to ensure the proper load-balancing behavior.

D. Interface speeds should be the same throughout the fabric to ensure that all links are utilized.

A. To provide inter-VLAN routing.

B. For implementing security policies.

C. For aggregating multiple interfaces.

D. To separate VLAN traffic.

A. Qualified-next-hop

B. Next-hop

C. Preference

D. Resolve

A. By ensuring the same IP address range can be used in different VLANs.

B. By enabling the identification and separation of traffic belonging to different VLANs.

C. By encrypting data traffic between VLANs.

D. By providing a backup path for data in case of link failure.