BICSI Registered Communications Distribution Designer - RCDD Exam Practice Test

A. Installed one or two pair cables from the boat slips to a distribution terminal on the closest point of land.

B. For security, each install should be terminated in the patch panel/cross-connect at the dockmaster or marina office.

C. Place distribution cable onto the dock and terminate in a suitable cabinet or enclosure. Install service drop to each boat slip.

D. Pre-cable each boat slip during construction.

A. 3 m (10 ft) from the loudspeaker with 2 watts of power input

B. 1 m (3.3 ft) from the loudspeaker with 2 watts of power input

C. 3 m (10 ft) from the loudspeaker with 1 watt of power input

D. 1 m (3.3 ft) from the loudspeaker with 1 watt of power input

A. Overvoltage

B. Transient

C. Swell

D. Sag

A. Transceiver

B. Receiver

C. Antenna

D. Transmitter

A. Specify fiber

B. Prepare as-built drawings

C. Install connector housing

D. Clean/polish connectors

A. Silicone based

B. Cementitious

C. Water based

D. Intumescent

A. 9300 square m (100,000 square ft)

B. 7389 square m (80,000 square ft)

C. 13,300 square m (140,000 square ft)

D. 5529 square m (60,000 square ft)

E. 11,160 square m (120,000 square ft)

A. Tier III

B. Tier II

C. Tier IV

D. Tier V

E. Tier I

A. Unicast

B. Broadcast

C. MAC

D. Host

E. IP

A. Replicating unicast

B. Unicast

C. Broadcast

D. Multicast

A. Teletypewriter/text telephone

B. Public telephone

C. Public internet station

D. Public telephone with access to high-speed internet connection

E. Public telephone with a shelfette

A. 4.9 m (16 ft)

B. 6 m (20 ft)

C. 2.4 m (8 ft)

D. 3.7 m (12 ft)

A. 1 m (3 ft)

B. 2 m (7 ft)

C. 4 m (13 ft)

D. 6 m (20 ft)

E. 10 m (30 ft)

A. Transients

B. Noise inductions

C. Random frequency variations

D. Harmonics

A. 457 mm (18 in)

B. 152 mm (6 in)

C. 610 mm (24 in)

D. 762 mm (30 in)

E. 305 mm (12 in)