[2023] 1z0-1086-22 PDF Questions - Perfect Prospect To Go With Fast2test Practice Exam
Oracle 1z0-1086-22 Pdf Questions - Outstanding Practice To your Exam
The Oracle 1z0-1086-22 certification exam is designed for professionals who want to validate their skills and knowledge in managing enterprise data through the Oracle Enterprise Data Management Cloud platform. The exam is intended for professionals who have experience in implementing and managing Oracle Enterprise Data Management Cloud solutions and are looking to advance their careers in this field.
The Oracle 1z0-1086-22 certification exam is intended for professionals who want to demonstrate their expertise in implementing and managing Oracle Enterprise Data Management Cloud. Candidates with experience in implementing and managing Oracle Enterprise Data Management Cloud should take this exam to validate their skills and knowledge. The exam is also suitable for professionals who want to learn about the latest features and best practices for managing Oracle Enterprise Data Management Cloud.
NEW QUESTION # 12
A request was submitted that triggered an approval policy. However, there are not enough approvers available to satisfy the terms of the policy.
What are two resolutions?
- A. After exceeding the defined number of approval notifications, the request is pushed back to the original submitter and must be submitted and approved again.
- B. The request is escalated to a data manager, who grants an exceptional approval and commits the request.
- C. The request is closed after exceeding the defined number of approval notifications and cannot be committed.
- D. The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed.
Answer: B,D
Explanation:
* The request is escalated to a data manager, who grants an exceptional approval and commits the request: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to a data manager after exceeding the defined number of approval notifications. The data manager can then grant an exceptional approval and commit the request.
* The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to an application owner after exceeding the defined number of approval notifications. The application owner can then change the approval policy to require fewer approvers, and then approve and commit the request.
NEW QUESTION # 13
You need nodes added to your General Ledger application's account dimension to be shared to your Planning application's account dimension.
Which two steps can you take to facilitate this?
- A. Link the account dimension in the General Ledger application to the account dimension in the Planning application.
- B. Create a maintenance view with viewpoints for both the General Ledger account dimension and the Planning account dimension.
- C. Create a node type converter for the Account node type in the Planning application that uses the General Ledger Account node type as a source.
- D. Create a node type converter for the Account node type in the General Ledger application that uses the Planning Account node type as a source.
Answer: A,C
Explanation:
Explanation
To share nodes between applications, you need to link dimensions and create node type converters. Linking dimensions establishes a relationship between dimensions in different applications that have similar structures or data. Creating node type converters enables you to transform properties or derive values from source node types to target node types when sharing data across applications. To share nodes from your General Ledger application's account dimension to your Planning application's account dimension, you need to link the account dimension in the General Ledger application to the account dimension in the Planning application, and create a node type converter for the Account node type in the Planningapplication that uses the General Ledger Account node type as a source. You do not need to create a maintenance view or a node type converter for the Account node type in the General Ledger application. References: Working with Dimension Links - Oracle Help Center2; Working with Node Type Converters - Oracle Help Center3
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/dmcaa/using_views_data_chaines_and_
NEW QUESTION # 14
Which task is NOT part of the Enterprise Data Management process?
- A. Creating views and viewpoints to manage alternate business perspectives
- B. Creating views and viewpoints to configure custom validations to enforce business rules on your data
- C. Creating ad-hoc reports to inspect node locations, properties, and history
- D. Sharing, mapping, synchronizing, and governing data across registered applications
- E. Using views to work with your data, and requests to modify your data
Answer: B
Explanation:
E: Creating views and viewpoints to configure custom validations to enforce business rules on your data: This option is not correct because creating views and viewpoints is not a task that involves configuring custom validations. Custom validations are configured at the node type level by defining validation rules and expressions that enforce business rules on your data.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/configuring-custom-validations.html
NEW QUESTION # 15
Which two objects can you transfer using templates?
- A. Data
- B. Dimensions
- C. Transaction history
- D. Requests
- E. Applications
Answer: B,E
Explanation:
Explanation
Templates enable you to store application or dimension configurations in an offline file for use in other Oracle Enterprise Data Management Cloud environments. Use templates to transfer applications or dimensions and their metadata objects across environments (for example, from a test environment to a production environment) or to get a quick start in new implementations. Templates contain metadata only and do not include any data, requests, or transaction history. References: Working with Templates - Oracle Help Center1
NEW QUESTION # 16
You have account dimensions in two different applications that must be kept in sync.
Given a business requirement that nodes added to either application must be shared with the other, what should you do?
- A. Create two node type converters: one with Application 1 accounts as the source and Application2 accounts as the target, and another with Application2 accounts as the source and Application 1 accounts as the target.
- B. Create one bi-directional node type converter between the two applications.
- C. Create three node type converters: one with Application! accounts as the source and Application2 accounts as the target, another with Application2 accounts as the source and Application! accounts as the target, and a third for bi-directional sharing.
- D. Create one node type converter with Application! accounts as the source and Application2 accounts as the target, and specify a reverse conversion in requests when sharing in the opposite direction.
Answer: A,D
Explanation:
Explanation
To share nodes between applications, you need to create node type converters and maintenance views. Node type converters enable you to transform properties or derive values from source node types to target node types when sharing data across applications. You need to create two node type converters: one with Application 1 accounts as the source and Application2 accounts as the target, and another with Application2 accounts as the source and Application 1 accounts as the target. This way, you can share nodes in both directions. Maintenance views contain viewpoints from multiple applications that facilitate sharing data across applications. You need to create a maintenance view with viewpoints for both the General Ledger account dimension and the Planning account dimension. This way, you can create requests or subscriptions to share nodes between the two dimensions. You do not need to create one bi-directional node type converter or a node type converter for the Account node type in the General Ledger application that uses the Planning Account node type as a source. References: Working with Node Type Converters - Oracle Help Center1; Working with Maintenance Views - Oracle Help Center2
NEW QUESTION # 17
Maintenance views contain viewpoints from multiple applications. What two types of sharing do these views facilitate?
- A. Copying hierarchies from one application to another
- B. Adding new nodes to comparable dimensions across multiple applications
- C. Aligning nodes and property values between comparable dimensions in different applications
- D. Sharing workflows and approvals for comparable dimensions across applications
Answer: B,C
Explanation:
Maintenance views are views that contain viewpoints from multiple applications that facilitate sharing data across applications. Maintenance views enable you to add new nodes to comparable dimensions across multiple applications by creating requests or subscriptions that include viewpoints from different applications. Maintenance views also enable you to align nodes and property values between comparable dimensions in different applications by using compare functions or property derivations. Maintenance views do not facilitate sharing workflows and approvals for comparable dimensions across applications, because workflows and approvals are defined at the application level and are not shared across applications. Maintenance views do not facilitate copying hierarchies from one application to another, because hierarchies are defined by hierarchy sets and are not shared across applications. Reference: Working with Maintenance Views - Oracle Help Center2
NEW QUESTION # 18
In your application, you have nodes for cost centers. You want to group them two ways: by department and geography.
What are two ways to accomplish this?
- A. Create two hierarchy sets; one where parent nodes are departments and child nodes are cost centers; and another where parent nodes are geographical regions and child nodes are cost centers.
- B. Create a list viewpoint for cost centers, then add parents for departments and geography.
- C. Create two node sets; one with a group of departments and another with a group of geographical regions.
- D. Create one hierarchy set with different top nodes for departments and geography, and add shared cost center nodes as children.
Answer: A,D
Explanation:
Explanation
Hierarchy sets define nodes' parent-child relationships. You can use hierarchy sets to organize nodes into different hierarchies based on business needs or perspectives. One way to group cost centers by department and geography is to create two hierarchy sets; one where parent nodes are departments and child nodes are cost centers; and another where parent nodes are geographical regions and child nodes are cost centers.
Another way is to create one hierarchy set with different top nodes for departments and geography, and add shared cost center nodes as children. Shared nodes allow the same nodes to exist multiple times in the hierarchy set. You cannot use a list viewpoint or node sets to group cost centers by department and geography, because they do not define parent-child relationships or hierarchies. References: Working with Hierarchy Sets
- Oracle Help Center
NEW QUESTION # 19
You have a source viewpoint with an entity hierarchy with top nodes defined for Departments and Geography.
Your target viewpoint only has departments.
If you define a subscription that is filtered by the Department top node, what happens when changes are made to the Geography hierarchy in the source viewpoint?
- A. The system notifies the request assignee that changes were made to the Geography hierarchy, but generates no request items.
- B. The system creates an empty subscription request for tracking purpose, but does not notify the request assignees.
- C. The system does not create a subscription request.
- D. The system creates a subscription request and flags request items for the Geography hierarchy for deletion.
Answer: C
Explanation:
Explanation
When a data manager submits a request in a view that has subscriptions defined, the system only generates subscription requests for the viewpoints that match the filter criteria of the subscriptions. If changes are made to a viewpoint that does not match the filter criteria, the system does not create a subscription request for that viewpoint. References: Creating, Editing, and Validating Subscriptions - Oracle Help Center1
NEW QUESTION # 20
Which two statements are true about mapping keys?
- A. One mapping key is required per location.
- B. The system automatically generates mapping keys for each unique location.
- C. Mapping keys control which dimensions are output in the source and target columns of the mapping export.
- D. Mapping keys consist of a location, source node type, and target node type.
Answer: C,D
Explanation:
Explanation
Mapping keys are used to specify the source node types mapped to target node types and to define a location name to export the mapping data. The following statements are true about mapping keys: mapping keys consist of a location, source node type, and target node type; mapping keys control which dimensions are output in the source and target columns of the mapping export. The following statements are false about mapping keys: the system automatically generates mapping keys for each unique location; one mapping key is required per location. You need to manually define mapping keys for each source-to-target relationship using a unique location name. You can have multiple mapping keys for the same location if you have different source node types mapped to the same target node type. References: Defining Mapping Keys - Oracle Help Center1; Exporting Mapping Data - Oracle Help Center
NEW QUESTION # 21
At the end of the registration process, each dimension generates a data chain, which is a group of data objects within the information model.
Which statement is FALSE regarding the data chain object?
- A. Node sets define the group of nodes available in viewpoints.
- B. A hierarchy uses all the data chain objects.
- C. A viewpoint is the interface you use to display and edit information, and work with data.
- D. Node types manage nodes and properties.
- E. You can define your own hierarchy sets when you want to create alternate hierarchies using different relationships between the same or different node types.
- F. Views are a collection of node sets and hierarchy sets.
Answer: B
Explanation:
* This option is false because a hierarchy does not use all the data chain objects, but only a node type and a hierarchy set. A node type defines the nodes and properties that are used in the hierarchy, and a hierarchy set defines the relationships between the nodes.
NEW QUESTION # 22
Which two are valid data sources for importing dimensions?
- A. Maintenance snapshots
- B. Registered external applications
- C. Tab-delimited files
- D. Comma-delimited files
Answer: B,D
Explanation:
* Comma-delimited files: This option is correct because comma-delimited files are supported as a data source for importing dimensions and mappings into Enterprise Data Management Cloud.
* Registered external applications: This option is correct because registered external applications are supported as a data source for importing dimensions and mappings into Enterprise Data Management Cloud.
NEW QUESTION # 23
When you register an application, the system creates a default view that contains all your dimensions.
However, there may be situations where the default view is not enough and you need to create an alternate view and viewpoints.
Which three are situations where you create an alternate view and viewpoints?
- A. You need to create a maintenance view with multiple viewpoints from different applications so you can maintain all your dimension information in one place.
- B. You need to create a view to give users access to a limited set of data.
- C. You need to create a validation view with multiple viewpoints from different dimensions so you can maintain all your application information in one place.
- D. You need to give users access to the default view so that they have access to only one dimension.
- E. You need an alternate view to share, compare, and map information across multiple applications.
Answer: B,C,E
Explanation:
* You need to create a validation view with multiple viewpoints from different dimensions so you can maintain all your application information in one place: This option is correct because a validation view is a type of view that allows you to create multiple viewpoints from different dimensions and validate them against each other. You can use a validation view to maintain all your application information in one place and check for any errors or inconsistencies.
* You need to create a view to give users access to a limited set of data: This option is correct because a view is a type of data chain object that defines the scope of data that users can access and work with.
You can create a view to give users access to a limited set of data by specifying the node sets and hierarchy sets that are included in the view.
* You need an alternate view to share, compare, and map information across multiple applications:
This option is correct because an alternate view is a typeof view that allows you to create multiple viewpoints from different applications and share, compare, and map information across them. You can use an alternate view to synchronize and govern data across registered applications.
NEW QUESTION # 24
Which EPM Automate command can you use to restart services on your instance?
- A. restartService
- B. startService
- C. recreateService
- D. resetService
Answer: A
Explanation:
The restartService command restarts the services on an environment. This command is useful when you want to refresh an environment after performing maintenance tasks such as importing or exporting snapshots or uploading files. Reference: Using EPM Automate Commands - Oracle Help Center2
NEW QUESTION # 25
Which task is NOT part of the Enterprise Data Management process?
- A. Creating views and viewpoints to manage alternate business perspectives
- B. Creating views and viewpoints to configure custom validations to enforce business rules on your data
- C. Creating ad-hoc reports to inspect node locations, properties, and history
- D. Sharing, mapping, synchronizing, and governing data across registered applications
- E. Using views to work with your data, and requests to modify your data
Answer: B
Explanation:
* Creating views and viewpoints to configure custom validations to enforce business rules on your data: This option is not correct because creating views and viewpoints is not a task that involves configuring custom validations. Custom validations are configured at the node type level by defining validation rules and expressions that enforce business rules on your data.
NEW QUESTION # 26
A node exists in a hierarchy. Which three types of properties could be present7
- A. Shared properties
- B. Node properties
- C. Hierarchy properties
- D. Relationship properties
- E. Inherited properties
Answer: B,D,E
Explanation:
"A node is an instance of a node type that represents a member in a hierarchy. A node has properties that describe its characteristics and behavior. There are three types of properties for nodes: Node properties; Relationship properties; Inherited properties." The other options are not types of properties for nodes.
NEW QUESTION # 27
A request was submitted that triggered an approval policy. However, there are not enough approvers available to satisfy the terms of the policy.
What are two resolutions?
- A. After exceeding the defined number of approval notifications, the request is pushed back to the original submitter and must be submitted and approved again.
- B. The request is escalated to a data manager, who grants an exceptional approval and commits the request.
- C. The request is closed after exceeding the defined number of approval notifications and cannot be committed.
- D. The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed.
Answer: B,D
Explanation:
1. The request is escalated to a data manager, who grants an exceptional approval and commits the request: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to a data manager after exceeding the defined number of approval notifications. The data manager can then grant an exceptional approval and commit the request.
2. The request is escalated to an application owner, who changes the approval policy to require fewer approvers, at which point the request is committed: This option is correct because when there are not enough approvers available to satisfy the terms of the approval policy, the request is escalated to an application owner after exceeding the defined number of approval notifications. The application owner can then change the approval policy to require fewer approvers, and then approve and commit the request.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/approving-and-enriching-requests.html
NEW QUESTION # 28
A request you submitted has been pushed back to you. One of the approvers has enriched the request with an action that your data access does not enable you to perform.
What happens when you submit the request again?
- A. The enriched item creates a validation error but can still be submitted with the rest of the request for approval.
- B. The enriched item is validated using the enricher's data access ancTtan be submitted along with the rest of the request.
- C. The enriched item creates a validation error and must be deleted from the request inspector before you can submit the request for approval.
- D. All items in the request are validated using your data access except the enriched item, which is validated during the approval phase using the enricher's data access.
Answer: D
Explanation:
All items in the request are validated using your data access except the enriched item, which is validated during the approval phase using the enricher's data access: This option is correct because when a request is pushed back to the submitter, the enriched item is preserved and validated using the enricher's data access during the approval phase. The rest of the items are validated using the submitter's data access when the request is submitted again.
Reference:
https://docs.oracle.com/en/cloud/saas/enterprise-data-management-cloud/edmra/approving-and-enriching-requests.html
NEW QUESTION # 29
Which three compare types can you select when you run a comparison between two viewpoints?
- A. Compare node names
- B. Compare relationships
- C. Find shared nodes
- D. Find missing nodes
- E. Compare properties
Answer: B,D,E
Explanation:
Explanation
When you run a comparison between two viewpoints, you can select different compare types to identify differences or similarities between the viewpoints. The compare types that you can select are: find missing nodes, compare properties, compare relationships, and compare node names. Find missing nodes compares the nodes in both viewpoints and identifies nodes that exist in one viewpoint but not in the other. Compare properties compares the property values of nodes in both viewpoints and identifies nodes that have different property values. Compare relationships compares the parent-child relationships of nodes in both viewpoints and identifies nodes that have different parents. Compare node names compares the node names of nodes in both viewpoints and identifies nodes that have different names. Find shared nodes is not a compare type that you can select, because shared nodes are identified by the Core.Shared property rather than by comparison.
References: Comparing Viewpoints - Oracle Help Center
NEW QUESTION # 30
You have entity information in your default view for your planning application, but you also want that entity information to be accessible in another view.
Which method can you use to accomplish this?
- A. Identify the view used by the entity dimension, create a different view, and then point to the default view.
- B. Identify the node set used by the entity dimension, create a viewpoint in a different view, and then point to that same node set.
- C. Copy the default view, create a request, and run a validation.
- D. Identify the viewpoint used by the entity dimension, create a viewpoint in a different view, and then point to the original viewpoint.
Answer: D
Explanation:
"You can reuse viewpoints across views by pointing to an existing viewpoint when you create a new viewpoint." This way, you can access the entity information in another view without duplicating data objects.
NEW QUESTION # 31
......
Online Questions - Outstanding Practice To your 1z0-1086-22 Exam: https://www.fast2test.com/1z0-1086-22-premium-file.html
Practice To 1z0-1086-22 - Fast2test Remarkable Practice On your Oracle Enterprise Data Management Cloud 2022 Implementation Professional Exam: https://drive.google.com/open?id=1_etGH7jDdizHokDHU4L1cpzBurWelRa8