350-601 Exam Dumps Pass with Updated 2021 Certified Exam Questions
350-601 Exam Questions - Real & Updated Questions PDF
Cisco Certified Specialist-Data Center Core
The Cisco Certified Specialist-Data Center Core is a mere recognition for completing the Cisco 350-601 exam. This is an option that the vendor introduced together with the new exam curriculum to ensure candidates are rewarded for their accomplishments. In a nutshell, every professional-level exam will now earn you a certification and a specialist title to complement your skills.
NEW QUESTION 77
Refer to the exhibit.
What is configured as a result of running these commands?
- A. strict unicast RPF
- B. IP Source Guard
- C. reverse lookup for outbound packets
- D. loose unicast RPF
Answer: A
NEW QUESTION 78
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets these requirements?
- A. Kubemetes
- B. Terraform
- C. Puppet
- D. SaltStack
Answer: D
NEW QUESTION 79
An engineer is implementing NetFlow on a Cisco Nexus 7000 Series Switch. Drag and drop the NetFlow commands from the left into the correct order they must be entered on the right.
Answer:
Explanation:
Explanation
1- feature netflow
2- flow exporter
3- flow monitor
4- interface<interface>
NEW QUESTION 80
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error massage. Which method can be used before application profile can be configured?
- A. POST to aaaRefresh
- B. GET to aaaListDomains
- C. POST to aaaLogin
- D. POST to aaaLogout
Answer: C
NEW QUESTION 81
Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP?
(Choose two.)
- A. POAP feature license
- B. TFTP server that contains the configuration script
- C. script signed with security key
- D. image noted in the script file against switch bootflash
- E. DHCP server to bootstrap IP information
Answer: B,E
Explanation:
Section: Automation
Explanation/Reference:
NEW QUESTION 82
Which adjacency server configuration makes two OTV edge devices located in the same site bring up the dual-site adjacency?
A)
B)
C)
D)
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: A
NEW QUESTION 83
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to configure the SAN boot?
- A. Create a SAN boot policy in which every initiator is mapped to the same target LUN.
- B. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
- C. Define the vHBAs as bootable and leave the default values on the target definition.
- D. Define the vHBAs as bootable and leave the boot target definition empty.
Answer: B
NEW QUESTION 84
Several production and development database servers exist in the same EPG and IP subnet. The IT security policy is to prevent connections between production and development. Which attribute must be used to assign the servers to different microsegments?
- A. Data center
- B. VMM domain
- C. IP address
- D. VM name
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/3-x/virtualization/b_ACI_Virtualization_
NEW QUESTION 85
Refer to the exhibit.
Which type of backup is required to restore a Cisco UCS configuration?
- A. logical configuration
- B. full state
- C. all configuration
- D. system configuration
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-0-2/b_CLI_Config_Guide_
NEW QUESTION 86
A POAP-enabled Cisco Nexus switch will not enter POAP mode. Which two conditions should be verified?
(Choose two.)
- A. The license file is missing on the switch.
- B. No Cisco NX-OS image is present on the bootflash.
- C. Bootflash must contain a special directory named POAP with poap.py file.
- D. No startup configuration is available.
- E. The switch is in bootup process.
Answer: A,C
NEW QUESTION 87
An engineer is implementing OTV on a transport that supports multicast. The solution needs to meet the following requirements:
* Establish adjacency to the remote peer by using multicast.
* Enable OTV advertisements for VLAN 100 to the other site.
Which two commands should be configured to meet these requirements? (Choose two.)
- A. otv control-group 232.1.1.1
- B. otv use-adjacency-server 172.27.255.94
- C. otv data-group 232.2.2.0/28
- D. otv site-vlan 100
- E. otv extend-vlan 100
Answer: A,E
NEW QUESTION 88
Refer to the exhibit.
In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.
Answer:
Explanation:
Explanation
Graphical user interface, text, application Description automatically generated
NEW QUESTION 89
Refer to the exhibit.
What be connected to clear the HA NOT READY status?
- A. management ports
- B. network uplinks
- C. Layer 1-Layer 2 ports
- D. server chassis
Answer: D
NEW QUESTION 90
Refer to the exhibit.
An engineer configures a new application profile using REST API and receives this error massage. Which method can be used before application profile can be configured?
- A. POST to aaaRefresh
- B. GET to aaaListDomains
- C. POST to aaaLogin
- D. POST to aaaLogout
Answer: C
NEW QUESTION 91
A network engineer must configure FCoE on an interface of a cisco MDS 9000 series switch. It should be used for mapping between Vlan 600 and Vsan 6. Drag and drop the commands from the bottom into their implementation order in the FCoE configuration. Not all commands are used.
Answer:
Explanation:
Explanation
fcoe vsan 6
allowed vlan 1,600
vsan 6 interface vfc 6
NEW QUESTION 92
An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model.
Which technology should be used to accomplish this goal?
- A. NX-API REST
- B. NX Yang
- C. JSON-RPC
- D. NETCONF
Answer: A
NEW QUESTION 93
What is a characteristic of electronic programmable logic device (EPLD) software upgrades?
- A. EPLD software should be upgraded only when instructed by Cisco TAC
- B. EPLD software must be upgraded when Cisco MDS NX-OS is upgraded.
- C. ELPD module upgrades are nondisruptive
- D. ELPD upgrades are available for fabric and power supply modules.
Answer: B
NEW QUESTION 94
......
Pass Guaranteed Quiz 2021 Realistic Verified Free Cisco: https://www.fast2test.com/350-601-premium-file.html
Free CCNP Data Center 350-601 Ultimate Study Guide: https://drive.google.com/open?id=1tUsZgLtcElpcNmf0_1VS7yPWrJ9NGTKY