700-905 Pre-Exam Practice Tests | (Updated 52 Questions)
Valid 700-905 Exam Q&A PDF - One Year Free Update
NEW QUESTION 22
HyperFlex uses file system native snapshots and provides which three features? (Choose three.)
- A. limitations in age and number of snapshots. See user manual for limitations
- B. automatically deduplicating data of snapshots through StorFS
- C. on datastore level, snapshots work the same as vSphere snapshots
- D. consolidation of snapshots is still manual but not necessary
- E. impact on the VM performance after a lot of writes, requiring future administration
- F. automatic update to the golden image when a configuration change is made
Answer: B,C,F
NEW QUESTION 23
In all HX server types, where are capacity drives installed?
- A. side
- B. back
- C. top
- D. front
Answer: D
Explanation:
NEW QUESTION 24
Which two features enable RAID cards striping as well as mirroring and parity1? (Choose two.)
- A. Hot replacement of drives available, depending on configuration
- B. Distributed drives across disparate systems can be in RAID together.
- C. On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.
- D. Integration with Cisco Intersight for a cloud-based storage management solution.
- E. No load on the system resources, drives seem as one drive to the operating system
Answer: B,C
NEW QUESTION 25
What is the minimum amount of memory required for an HX node?
- A. 32 GB
- B. 192 GB
- C. 64 GB
- D. 128 GB
Answer: D
Explanation:
NEW QUESTION 26
When cabling a given HX node to the Fabric Interconnect which three actions are required?
(Choose three.)
- A. Connect server port L1 to Fabric Interconnect port L1.
- B. Connect server port L2 to Fabric Interconnect port L2
- C. Connect the node to different port numbers on each of the two Fabric Interconnects.
- D. Connect port 2 on the VIC to Interconnect B
- E. Connect port 1 on the VIC to Fabric Interconnect A.
- F. Connect the node to the same port number on each of the two Fabric Interconnects.
Answer: D,E,F
Explanation:
NEW QUESTION 27
What does the letter W indicate when selecting CPUs for your HX Node (le. HX-CPU 8170M)?
- A. support of 1.5 TB/socket of memory
- B. support for NVMe
- C. support for all flash drive array
- D. support for 768 TB/socket of memory
Answer: A
Explanation:
NEW QUESTION 28
In all HX server types, where are capacity drives installed?
- A. side
- B. back
- C. top
- D. front
Answer: D
NEW QUESTION 29
Which statement about Standalone Cisco UCS Server Deployments is valid?
- A. They do not require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
- B. They do not require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- C. They require Cisco Fabric Interconnects to operate, which reduces the Capital Expenses (CapEx) associated with the deployment
- D. They require Cisco Fabric Interconnects to operate, which reduces the Operating Expenses (OpEx) associated with the deployment
Answer: B
Explanation:
NEW QUESTION 30
What is the maximum number of cores supported in the Cisco UCS M5 server?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 31
HyperFlex compute nodes contribute what percentage of the overall disk storage capacity?
- A. 20%
- B. 5%
- C. 10%
- D. 0%
Answer: D
Explanation:
NEW QUESTION 32
What is required to cluster a pair of Fabric Interconnects?
- A. UCS Manager 2.1 or better
- B. HXDP 3.5.2 or better
- C. connection between the Fl pair using ports L1 and L2
- D. uplink connections to the enterprise network
Answer: C
Explanation:
NEW QUESTION 33
Cisco HyperFlex AII-NVMe nodes are expected to be supported beginning in which HXDP version'?
- A. HXDP 4.0
- B. HXDP 3 5.2
- C. HXDP 3.5.1
- D. HXDP 4.0.1
Answer: A
Explanation:
NEW QUESTION 34
Which three features for NVMe transfer protocol are valid? (Choose three.)
- A. Requires 10 controller
- B. Streamlined commands for fewer CPU instructions
- C. Improves SAS and SATA speed
- D. Increases memory speed for more lOPs
- E. More and deeper queues
- F. Uses PCIe interface
Answer: B,E,F
Explanation:
NEW QUESTION 35
The process of optimizing information is tightly tied to the writing process as it is performed inline as the
writing process is being performed The process of data optimization is performed with which two processes?
(Choose two)
- A. On write, the local lOVisor sends the write to the primary CVM for that block
- B. The secondary CVM compresses the data, reads it from its cache drive and mirrors it
- C. The primary CVM compresses the data, writes it to its cache drive and mirrors it
- D. ACK is sent to the CVM that the write is about to be initiated
- E. On read/Write. the distributed VAAI sends the write to the primary CVM for that block
Answer: D,E
NEW QUESTION 36
HyperFlex virtual servers differ from regular servers in which two key areas? (Choose two.)
- A. No RAID is required to consolidate disks into a shared data platform.
- B. CVM: Virtual appliance, which performs reading/writing, caching, deduplication, and compression.
- C. NVMe: Regular servers do not support NVMe drives for high availability.
- D. CCC: Cisco Cloud Center is used for multi-cloud integration and seamless deployment.
- E. SP: UCS Service Profiles are used to delineate MAC address pools from upstream networks.
Answer: A,B
Explanation:
NEW QUESTION 37
A Controller Virtual Machine (CVM) is an Ubuntu Linux VM that lives outside the converged data platform
on the housekeeping drive since it is involved in creating the convergence data platform Which two features
tor CVMs are valid? (Choose two.)
- A. creates hooks tor services related to third-party abstraction applications
- B. does not perform caching, deduplication: and compression of data
- C. needs network access to ESXi. other CVMs, and management network
- D. an Ubuntu based VM running in the control space of each individual server, having linear access to the
server's VMs and networking controls - E. is installed automatically by the HyperFlex installer, configured through the installer
Answer: D,E
NEW QUESTION 38
Which three additional management tools are included in HXDP to configure HyperFlex clusters? (Choose
three.)
- A. HyperFlex Connect
- B. Data Center Network Manager
- C. Cisco IMC 13
- D. REST API
- E. UCS Manager
- F. Storage CLI
Answer: A,D,F
NEW QUESTION 39
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to
automatically build the service profile in UCS Manager?
- A. Check the GPU workflow during the cluster creation process
- B. Check the extended memory option during the cluster creation process
- C. Check Run UCS Manager Configuration during the cluster creation process
- D. Check the administrative workflow option during the cluster creation process
Answer: A
NEW QUESTION 40
Which Cisco UCS Server running HXDP supports the largest storage pool?
- A. UCS B480
- B. HX220
- C. UCS B200
- D. HX 240
Answer: D
Explanation:
NEW QUESTION 41
......
Cisco HyperFlex for Systems Engineers Free Update Certification Sample Questions: https://www.fast2test.com/700-905-premium-file.html