D-PDC-DY-23 Exam Questions Dumps, Selling EMC Products
D-PDC-DY-23 Cert Guide PDF 100% Cover Real Exam Questions
NEW QUESTION # 92
Refer to the exhibit:
Which command is used to recover the UFD group when the upstream interface normalizes?
- A. clear ufd disable interface ethernet 1/1/3 1/1/ 4
- B. clear ufd disable UED Croup 01
- C. clear ufd-disable interface ethernet 1/1/ 1
- D. clear ufd-disable uplink-state-group UFD_Group 01
Answer: D
NEW QUESTION # 93
How are ACLs processed?
- A. FIFO
- B. Sequentially
- C. LIFO
- D. Randomly
Answer: B
NEW QUESTION # 94
Refer to the exhibit.
A network administrator is attempting to configure a static route on OS10-A to reach the loopback0 address on OS10-B.
Why is the ping failing?
- A. OS10-B must share a common VRF
- B. The route is pointing to the wrong next-hop on OS10-A
- C. The route has been added to the incorrect VRF on OS10-A
- D. Interface Eth1/1/2 is a member of the wrong VRF on OS10-A
Answer: C
NEW QUESTION # 95
To which IEEE standard are dynamic LAGs compliant on Dell EMC Networking OS10 switches?
- A. 802.3ae
- B. 802.3ac
- C. 802.3af
- D. 802.3ad
Answer: D
NEW QUESTION # 96
A customer has disabled LLDP on the management interface of the switch.
What is the proper command to re- enable it?
- A. OS10(config)# interface mgmt 1/1/1
OS10(conf-if-ma-1/1/1)#lldp transmit
OS10(conf-if-ma-1/1/1)#lldp receive - B. OS10(config)# interface mgmt 1/1/1
OS10(conf-if-ma-1/1/1)#lldp med enable
OS10(conf-if-ma-1/1/1)#lldp timer 10 - C. OS10(config)# lldp enable OS10(config)#lldp transmit OS10(config)#lldp receive
- D. OS10(config)# interface mgmt 1/1/1
OS10(conf-if-ma-1/1/1)#lldp tly-select
OS10(conf-if-ma-1/1/1)#lldp dot1tlv
Answer: A
NEW QUESTION # 97
A network administrator is troubleshooting a PBR implementation and needs to know how many packets have matched the route-map criteria.
How do they view this information in OS10?
- A. OS10# show interface statistics
- B. OS10# show route-maproute-map-statistics
- C. OS10# show route-mappbr-statistics
- D. OS10# show route-map
Answer: C
NEW QUESTION # 98
What should be disabled on an interface before disabling LLDP transmit capability?
- A. LLDP-MED
- B. Loop Guard
- C. VLAN 1
- D. STP
Answer: A
NEW QUESTION # 99
What does an ABR do with a Type 7 LSA it receives from an attached NSSA?
- A. Nothing, since Type 7 originated external routing information is rejected by an ABR
- B. It summarizes the information in the Type 7 LSA in a new Type 3 LSA
- C. It translates the Type 7 to a Type 5, and floods the LSA
- D. It floods the Type 7 to the rest of the OSPF domain
Answer: C
NEW QUESTION # 100
Which command shows whether a LAG protocol is static or dynamic on a Dell EMC Networking OS10 switch?
- A. show lacp neighbor
- B. show interface port-channel summary
- C. show running-configuration lacp
- D. show port-channel summary
Answer: D
NEW QUESTION # 101
Which two options describe the differences between Layer 2 and Layer 3 QoS? (Select 2)
- A. DSCP priorities are a combination of Class Selector and Drop Precedence.
- B. CoS priorities are encoded in the IP header.
- C. DSCP implements seven unique traffic classes for packet queueing.
- D. 802.1P trust-maps only trigger against 802.1Q tagged traffic.
Answer: A,C
NEW QUESTION # 102
List the path attributes in order of BGP preference.
Answer:
Explanation:
NEW QUESTION # 103
Which LSA type provides information necessary to reach routers originating type 5 LSA's in other areas?
- A. Summary (Type 3)
- B. ASBR-Summary (Type 4)
- C. Router (Type 1)
- D. NSSA (Type 7)
Answer: B
NEW QUESTION # 104
Which field in an IP header is used for QoS marking?
- A. CoS
- B. ToS
- C. Options Header
Answer: B
NEW QUESTION # 105
Which statement is true regarding PTP7
- A. PTP uses clock time zone command to synchronize servers and clients.
- B. Clients pull time from a server.
- C. PTP leverages the BMCA (Best Master Clock Algorithm) to define the timing hierarchy.
- D. PTP synchronizes timekeeping among a set of distributed time servers and clients.
Answer: C
NEW QUESTION # 106
A network administrator needs to configure separate rendezvous points for multicast groups
232.0.0.100 and 225.0.0.100.
How would they accomplish this?
- A. OS10(config)# ip pim rp-address 232.0.0.100/32 group-address 1.1.1.1 OS10(config)# ip pim rp-address 225.0.0.100/32 group-address 2.2.2.2
- B. OS10(config)# ip pim rp-address 1.1.1.1 group-address 232.0.0.100/32 OS10(config)# ip pim rp-address 2.2.2.2 group-address 225.0.0.100/32
- C. OS10(config)# ip pim rp-address 232.0.0.100/32 source-address 1.1.1.1 OS10(config)# ip pim rp-address 225.0.0.100/32 source-address 2.2.2.2
- D. OS10(config)# ip multicast rp-address 1.1.1.1 group-address 232.0.0.100/32 OS10(config)# ip multicast rp-address 2.2.2.2 group-address 225.0.0.100/32
Answer: B
NEW QUESTION # 107
A network administrator is implementing VRRP on their VLT switches and has configured VLAN10 to use a matching VRRP group ID 10.
Which two commands indicate default VRRP settings? (Select 2)
- A. OS10 (conf-if-v1-10) # vrrp mode active-active
- B. OS10 (conf-vlan10-vrid-10) # advertise-interval 3
- C. OS10 (config) # vrrp version 3
- D. OS10 (conf-vlan10-vrid-10) # no preempt
- E. OS10 (conf vlan10 vrid 10) # no authentication
Answer: D,E
NEW QUESTION # 108
What does BGP use for reliable transport?
- A. TCP
- B. UDP
- C. SCTP
- D. DCCP
Answer: A
NEW QUESTION # 109
What OS10 command is used to remove VLAN 40 from a trunk port?
- A. no switchport mode trunk
- B. switch pert mode trunk no allow vlan 40
- C. switchport trunk delete vlan 40
- D. no switchport trunk allowed vlan 40
Answer: D
NEW QUESTION # 110
At which layer does LLDP operate?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 111
A network administrator needs to restrict packets that are destined to the CPU of an OS10 switch.
How do they accomplish this?
- A. Static null routes
- B. IP fragment ACLs
- C. Control-plane ACLs
- D. Management-plane ACLs
Answer: C
NEW QUESTION # 112
The VLAN tag is located between which fields in the Ethernet frame?
- A. Source MAC and Ether Type/Size
- B. Ether Type/Size and Data
- C. Destination MAC and Source MAC
- D. Preamble and Destination MAC
Answer: A
NEW QUESTION # 113
When using Policy Based Routing what is a valid matching criterion?
- A. Destination TCP port number
- B. AAA security credentials
- C. 802.1Q VLAN ID
- D. Source hostname
Answer: D
NEW QUESTION # 114
What is a feature of TACACS+ that is NOT a feature of RADIUS?
- A. Encryption of only the password in the packet
- B. Encryption of all data in the packet
- C. Assignment of role-based permissions
- D. Assignment of user-based permissions
Answer: B
NEW QUESTION # 115
What is a benefit of adding a virtual router partition in OS10?
- A. Allows multiple logical IP subnets on a single LAN segment.
- B. Allow production traffic to have multiple redundant gateways.
- C. Allows for management interface to have an isolated routing table.
- D. Allows VRRP to work in an active-active manner.
Answer: C
NEW QUESTION # 116
......
Pass D-PDC-DY-23 Exam - Real Questions and Answers: https://www.fast2test.com/D-PDC-DY-23-premium-file.html
Pass D-PDC-DY-23 Review Guide, Reliable D-PDC-DY-23 Test Engine: https://drive.google.com/open?id=1xreAVf7FL0fOTGEfaJLIZi666trRl1lh