[Dec 20, 2021] 300-715 Exam Brain Dumps - Study Notes and Theory
Pass Cisco 300-715 Test Practice Test Questions Exam Dumps
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Endpoint compliance
The following will be discussed in CISCO 300-715 dumps:
- Implement probes
- Configure endpoint identity management
- Implement profiler services
- Implement CoA
Conclusion
If you want to excel and prove your skills in any profession, you must go the extra mile to show that you are qualified for your job. The Cisco 300-715 test stands out as a skill enabler for ISE specialists who want to hone their skills and make themselves industry-ready. With the right support from training in addition to revision guides, you will ace this exam in the initial try.
NEW QUESTION 63
An engineer is implementing network access control using Cisco ISE and needs to separate the traffic based on the network device ID and use the IOS device sensor capability. Which probe must be used to accomplish this task?
- A. NetFlow probe
- B. RADIUS probe
- C. network scan probe
- D. HTTP probe
Answer: D
NEW QUESTION 64
What allows an endpoint to obtain a digital certificate from Cisco ISE during a BYOD flow?
- A. Supplicant Provisioning Wizard
- B. Network Access Control
- C. My Devices Portal
- D. Application Visibility and Control
Answer: A
NEW QUESTION 65
What must be configured on the WLC to configure Central Web Authentication using Cisco ISE and a WLC?
- A. Set the NAC State option to RADIUS NAC.
- B. Use the radius-server vsa send authentication command.
- C. Set the NAC State option to SNMP NAC.
- D. Use the ip access-group webauth in command.
Answer: B
NEW QUESTION 66
Which default endpoint identity group does an endpoint that does not match any profile in Cisco ISE become a member of?
- A. unknown
- B. profiled
- C. Endpoint
- D. blacklist
- E. white list
Answer: A
Explanation:
Explanation
If you do not have a matching profiling policy, you can assign an unknown profiling policy. The endpoint is therefore profiled as Unknown. The endpoint that does not match any profile is grouped within the Unknown identity group. The endpoint profiled to the Unknown profile requires that you create a profile with an attribute or a set of attributes collected for that endpoint.
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html
NEW QUESTION 67
Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two.)
- A. BYOD
- B. hotspot
- C. new AD user 802 1X authentication
- D. posture
- E. guest AUP
Answer: C,D
NEW QUESTION 68
A Cisco ISE administrator needs to ensure that guest endpoint registrations are only valid for one day When testing the guest policy flow, the administrator sees that the Cisco ISE does not delete the endpoint in the Guest Endpoints identity store after one day and allows access to the guest network after that period. Which configuration is causing this problem?
- A. The length of access is set to 7 days in the Guest Portal Settings
- B. The Endpoint Purge Policy is set to 30 days for guest devices
- C. The Guest Account Purge Policy is set to 15 days
- D. The RADIUS policy set for guest access is set to allow repeated authentication of the same device
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_01101.html#:~:text=Cisco%20ISE%2C%20by%20default%2C%20deletes,5000%20endpoints%20every%20three%20minutes.
NEW QUESTION 69
A Cisco ISE server sends a CoA to a NAD after a user logs in successfully using CWA Which action does the CoA perform?
- A. It applies the downloadable ACL provided in the CoA
- B. It triggers the NAD to reauthenticate the client
- C. It applies new permissions provided in the CoA to the client session.
- D. It terminates the client session
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115732-central-web-auth-00.html
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/113362-config-web-auth-ise-00.ht
NEW QUESTION 70
An engineer is configuring a virtual Cisco ISE deployment and needs each persona to be on a different node.
Which persona should be configured with the largest amount of storage in this environment?
- A. Primary Administration
- B. Platform Exchange Grid
- C. policy Services
- D. Monitoring and Troubleshooting
Answer: A
NEW QUESTION 71
A new employee just connected their workstation to a Cisco IP phone. The network administrator wants to ensure that the Cisco IP phone remains online when the user disconnects their Workstation from the corporate network Which CoA configuration meets this requirement?
- A. NoCoA
- B. Disconnect
- C. Reauth
- D. Port Bounce
Answer: A
Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
NEW QUESTION 72
What is a requirement for Feed Service to work?
- A. Cisco ISE has Internet access to download feed update.
- B. TCP port 8080 must be opened between Cisco ISE and the feed server.
- C. Cisco ISE has a base license.
- D. Cisco ISE has access to an internal server to download feed update.
Answer: D
Explanation:
Section: Architecture and Deployment
NEW QUESTION 73
If a user reports a device lost or stolen, which portal should be used to prevent the device from accessing the network while still providing information about why the device is blocked?
- A. BYOD
- B. Client Provisioning
- C. Guest
- D. Blacklist
Answer: D
NEW QUESTION 74
Refer to the exhibit. In which scenario does this switch configuration apply?
- A. when allowing multiple IP phones to be connected
- B. when passing IP phone authentication
- C. when preventing users with hypervisor
- D. when allowing a hub with multiple clients connected
Answer: D
Explanation:
https://www.linkedin.com/pulse/mac-authentication-bypass-priyanka-kumari#:~:text=Multi%2Dauthentication%20host%20mode%3A%20You,allows%20multiple%20source%20MAC%20addresses.
NEW QUESTION 75
Which configuration is required in the Cisco ISE authentication policy to allow Central Web Authentication?
- A. MAB and if authentication failed, continue
- B. Dot1x and if user not found, continue
- C. Dot1x and if authentication failed, continue
- D. MAB and if user not found, continue
Answer: D
NEW QUESTION 76
What are two requirements of generating a single signing in Cisco ISE by using a certificate provisioning portal, without generating a certificate request? (Choose two )
- A. Enter the IP address of the device
- B. Location the CSV file for the device MAC
- C. Choose the hashing method
- D. Select the certificate template
- E. Enter the common name
Answer: D,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0-Certificate-Provisioning-Portal.html
NEW QUESTION 77
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 8905
- B. TCP 8909
- C. UDP 1812
- D. TCP 443
Answer: A
NEW QUESTION 78
What does a fully distributed Cisco ISE deployment include?
- A. All Cisco ISE personas on their own dedicated nodes.
- B. PAN and PSN on the same node while MnTs are on their own dedicated nodes.
- C. All Cisco ISE personas are sharing the same node.
- D. PAN and MnT on the same node while PSNs are on their own dedicated nodes.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ISE_admin_guide_24/m_setup_cisco_ise.html
NEW QUESTION 79
What is an advantage of using EAP-TLS over EAP-MS-CHAPv2 for client authentication?
- A. EAP-TLS uses a username and password for authentication to enhance security, while EAP-MS-CHAPv2 does not.
- B. EAP-TLS uses a device certificate for authentication to enhance security, while EAP-MS-CHAPv2 does not.
- C. EAP-TLS uses multiple forms of authentication, while EAP-MS-CHAPv2 only uses one.
- D. EAP-TLS secures the exchange of credentials, while EAP-MS-CHAPv2 does not.
Answer: B
NEW QUESTION 80
Which two events tngger a CoA for an endpoint when CoA is enab.ed globally for ReAuth?
(Choose two.)
- A. endpoint profile transition from Aop.e-dev.ee to App.e-iPhone
- B. addition of endpoint to My Devices Portal
- C. endpoint profile transition from Unknown to Windows 10-Workstation
- D. updating of endpoint dACL.
- E. endpoint marked as lost in My Devices Portal
Answer: A,C
NEW QUESTION 81
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION 82
An engineer is configuring 802.1X and wants it to be transparent from the users' point of view. The implementation should provide open authentication on the switch ports while providing strong levels of security for non-authenticated devices. Which deployment mode should be used to achieve this?
- A. low-impact
- B. open
- C. closed
- D. high-impact
Answer: B
NEW QUESTION 83
......
Verified 300-715 dumps Q&As - 300-715 dumps with Correct Answers: https://www.fast2test.com/300-715-premium-file.html
The Best CCNP Security Study Guide for the 300-715 Exam: https://drive.google.com/open?id=1-eB3aSNtHhougQpSpp_eJ9du7S7b0HQQ