Exam Questions and Answers for MD-100 Study Guide Questions and Answers! [Q115-Q139]

Exam Questions and Answers for MD-100 Study Guide Questions and Answers!

Windows 10 Certification Sample Questions and Practice Exam

NEW QUESTION 115
You have a computer that runs Windows 10.
You need to be able to recover the computer by using System Image Recovery.
What should you use to create a system image?

A. File History
B. Windows System Image Manager (Windows SIM)
C. System Protection
D. Backup and Restore (Windows 7)

Answer: D

Explanation:
Reference:
https://answers.microsoft.com/en-us/windows/forum/windows_10/how-to-create-a-system-image-in-windows-10/84fa6683-e3ac-4e93-9139-368af9267869

NEW QUESTION 116
You have two computers named Computer1 and Computer2 that run Windows 10. The computers are in a workgroup.
You perform the following configurations on Computer1:
* Create a user named User1.
* Add User1 to the Remote Desktop Users group.
You perform the following configurations on Computer2:
* Create a user named User1 and specify the same user password as the one set on Computer1.
* Create a share named Share2 and grant User1 Full control access to Share2.
* Enable Remote Desktop.
What are the effects of the configurations? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 117
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a workgroup computer that runs Windows 10. The computer contains the local user accounts shown in the following table.

You need to configure the desktop background for User1 and User2 only.
Solution: From the local computer policy, you configure the Filter Options settings for the computer policy.
Does this meet the goal?

A. No
B. Yes

Answer: A

NEW QUESTION 118
You have a computer named Computer1 that runs Windows 7. Computer1 has a local user named User1 who has a customized profile.
On Computer1, you perform a clean installation of Windows 10 without formatting the drives.
You need to migrate the settings of User1 from Windows7 to Windows 10.
Which two actions should you perform? To answer, drag the appropriate actions to the correct targets. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

References:
https://docs.microsoft.com/en-us/windows/deployment/usmt/usmt-how-it-works

NEW QUESTION 119
You need to meet the technical requirements for the HR department users.
Which permissions should you assign to the HR department users for the D:\Reports folder? To answer, select the appropriate permissions in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

References:
https://www.online-tech-tips.com/computer-tips/set-file-folder-permissions-windows/

NEW QUESTION 120
You are planning a recovery strategy for computers that run Windows 10.
You need to create recovery procedures to roll back feature updates and quality updates.
What should you include in the procedures? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

References:
https://www.thewindowsclub.com/rollback-uninstall-windows-10-creators-update
https://www.dummies.com/computers/pcs/undo-windows-update/

NEW QUESTION 121
You customize the Start menu on a computer that runs Windows 10 as shown in the following exhibit.

You need to add Remote Desktop Connection to Group1 and remove Group3 from the Start menu.
Which two actions should you perform from the Start menu customizations? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

A. Unlock Group!
B. Delete Group3.
C. Remove Command Prompt from Group1.
D. Rename Group3 as Group1.
E. Add Remote Desktop Connection to Group1.

Answer: A,E

NEW QUESTION 122
Your network contains an Active Directory domain that is synced to a Microsoft Azure Active Directory (Azure AD) tenant.
Your company purchases a Microsoft 365 subscription.
You need to migrate the Documents folder of users to Microsoft OneDrive for Business.
What should you configure?

A. One Drive Group Policy settings
B. Folder Redirection Group Policy settings
C. roaming user profiles
D. Enterprise State Roaming

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/onedrive/redirect-known-folders?redirectSourcePath=%252fen-us%
252farticle%252fredirect-windows-known-folders-to-onedrive-e1b3963c-7c6c-4694-9f2f-fb8005d9ef12

NEW QUESTION 123
You have a computer that runs Windows 10 and contains the folders shown in the following table.

You create the groups shown in the following table.

On FolderA, you remove permission inheritance. To each folder, you assign the NTFS permissions shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/access-control

NEW QUESTION 124
You have an Azure Active Directory (Azure AD) tenant that contains a user named [email protected].
You have a computer named Computer1 that runs Windows 10.
You join Computer1 to Azure AD. You enable Remote Desktop on Computer1.
[email protected] attempts to connect to Computer1 by using Remote Desktop and receives the following error message: "The logon attempt failed." You need to ensure that the user can connect to Computer1 by using Remote Desktop.
What should you do first?

A. From the local Group Policy, modify the Allow log on through Remote Desktop Services user right.
B. On Computer1, create a local user and add the new user to the Remote Desktop Users group.
C. In Azure AD, assign [email protected] the Cloud device administrator role.
D. In Azure AD, assign [email protected] the Security administrator role.

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows/security/threat-protection/security-policy-settings/allow-log-onthrough-remote-desktop-services

NEW QUESTION 125
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain. The domain contains a computer named Computer1 that runs Windows 8.1.
Computer1 has apps that are compatible with Windows 10.
You need to perform a Windows 10 in-place upgrade on Computer1.
Solution: You copy the Windows 10 installation media to a Microsoft Deployment Toolkit (MDT) deployment share. You create a task sequence, and then you run the MDT deployment wizard on Computer1.
Does this meet the goal?

A. No
B. Yes

Answer: B

Explanation:
Reference:
https://docs.microsoft.com/en-us/windows/deployment/deploy-windows-mdt/upgrade-to-windows-10-with-the-

NEW QUESTION 126
You have a computer named Computer1 that runs Windows 10. Computer1 contains a registry key named Key1 that has the values shown in the exhibit. (Click the Exhibit tab.).

You have a Registration Entries (.reg) file named File1.reg that contains the following text.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Key1]
"String1"=-
@="2"
You need to identify the effect of importing File1.reg to Computer1.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
Box 1: String1 will be deleted.
To delete a value, append equals and then minus to the value. For example:
"String1"=-
Box 2: Value1 will have a value of 1
@="2" sets the default value to 1 but Value1 already has a DWORD value.
A DWORD (32-bit) value is a hexadecimal value. Value1 is 0x00000001 which is 1.
References:
https://www.computerhope.com/issues/ch000848.htm
https://www.computerperformance.co.uk/vista/reg-create/

NEW QUESTION 127
Your network contains an Active Directory domain. The domain contains the users shown in the following table.

The Authenticated Users group has the Add workstations to domain user right in the Default Domain Controllers Policy.
The Device Managers and Help Desk groups are granted the Create Computer objects permission for the Computers container of the domain.
You have 15 workgroup computers that run Windows 10. Each computer contains a local user account named LocalAdmin1 that is a member of the following groups:
Administrators
Device Owners
Authenticated Users
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 128
You have a computer named Computer1 that runs Windows 10. Computer1 is in a workgroup.
Computer1 contains the folders shown in the following table.

On Computer1, you create the users shown in the following table.

User1 encrypts a file named File1.txt that is in a folder named C:\Folder1.
What is the effect of the configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

References:
https://support.microsoft.com/en-za/help/310316/how-permissions-are-handled-when-you-copy-and-move-files-

NEW QUESTION 129
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com. The domain contains the users shown in the following table.

You have a computer named Computer1 that runs Windows 10 and is in a workgroup.
A local standard user on Computer1 named User1 joins the computer to the domain and uses the credentials of User2 when prompted.
You need to ensure that you can rename Computer1 as Computer33.
Solution: You use the credentials of User1 on Computer1.
Does this meet the goal?

A. No
B. Yes

Answer: A

Explanation:
Explanation
Renaming a domain-joined computer will also rename the computer account in the domain. To do this, you need domain administrator privileges.
User1 is a standard user.
References:
https://docs.microsoft.com/en-us/windows/security/identity-protection/access-control/active-directory-security-g

NEW QUESTION 130
You have a computer named Computer1. Computer1 runs Windows 10 Pro. Computer1 has a cellular connection and a Wi-Fi connection.
You want to prevent Computer1from using the cellular connection unless a you manually connects to the cellular network.
What should you do?
To complete this task, sign in to the required computer or computers.

Answer:

Explanation:
Select the Network icon on the lower right corner of the taskbar, and then select the cellular network icon.
Clear the Let Windows manage this connection check box.
Reference:
https://support.microsoft.com/en-za/help/10739/windows-10-cellular-settings

NEW QUESTION 131
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 10921597

You need to identify the total number of events that have Event ID 63 in the Application event log. You must type the number of identified events into C:\Folder1\FileA.txt.
To complete this task, sign in to the required computer or computers and perform the required action.

Answer:

Explanation:
Open Event Viewer.
Click the log that you want to filter, then click Filter Current Log from the Action pane or right-click menu. This will open the Filter Current Log dialog box.
You can specify a time period if you know approximately when the relevant events occurred. You can specify the event level, choosing between Critical, Warning, Verbose, Error and Information. If you select none of these, all event levels will be returned. You can't modify which event log is being checked as filters apply only to a single log.
You can choose the event sources which have generated the log entries, and search for key words, users, or computers. You can also search using specific event IDs.
Reference:
https://www.manageengine.com/products/active-directory-audit/kb/how-to/how-to-search-the-event-viewer.html

NEW QUESTION 132
You have three computers that run Windows 10 as shown in the following table.

All the computers have C and D volumes. The Require additional authentication at startup Group Policy settings is disabled on all the computers.
Which volumes can you encrypt by using BitLocker Drive Encryption (BitLocker)? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation:
The "Require additional authentication at startup" setting is located in the Computer Configuration\ Administrative Templates\ Windows Components\ BitLocker Drive Encryption\ Operating System Drives path. If the policy is disabled and there is no TPM chip installed, operating system drives can not be encrypted using BitLocker. Additional data volumes can be protected using a password as a key protector for example.
References:
https://www.windowscentral.com/how-use-bitlocker-encryption-windows-10
Topic 1, Fabrikam, Inc.
Overview Existing Environment
Fabrikam, Inc. is a distribution company that has 500 employees and 100 contractors.
Active Directory
The network contains an Active Directory forest named fabrikam.com. The forest is synced to Microsoft Azure Active Directory (Azure AD). All the employees are assigned Microsoft 365 E3 licenses.
The domain contains a user account for an employee named User10.
Client Computers
All the employees have computers that run Windows 10 Enterprise. All the computers are installed without Volume License Keys. Windows 10 license keys are never issued.
All the employees register their computer to Azure AD when they first receive the computer.
User10 has a computer named Computer10.
All the contractors have their own computer that runs Windows 10. None of the computers are joined to Azure AD.
Operational Procedures
Fabrikam has the following operational procedures:
Updates are deployed by using Windows Update for Business.
When new contractors are hired, administrators must help the contactors configure the following settings on their computer:
- User certificates
- Browser security and proxy settings
- Wireless network connection settings
Security policies
The following security policies are enforced on all the client computers in the domain:
* All the computers are encrypted by using BitLocker Drive Encryption (BitLocker). BitLocker recovery information is stored in Active Directory and Azure AD.
* The local Administrators group on each computer contains an enabled account named LocalAdmin.
* The LocalAdmin account is managed by using Local Administrator Password Solution (LAPS).
Problem Statements
Fabrikam identifies the following issues:
* Employees in the finance department use an application named Application1. Application1 frequently crashes due to a memory error. When Application1 crashes, an event is written to the application log and an administrator runs a script to delete the temporary files and restart the application.
* When employees attempt to connect to the network from their home computer, they often cannot establish a VPN connection because of misconfigured VPN settings.
* An employee has a computer named Computer11. Computer11 has a hardware failure that prevents the computer from connecting to the network.
* User10 reports that Computer10 is not activated.
Technical Requirements
Fabrikam identifies the following technical requirements for managing the client computers:
* Provide employees with a configuration file to configure their VPN connection.
* Use the minimum amount of administrative effort to implement the technical requirements.
* Identify which employees' computers are noncompliant with the Windows Update baseline of the company.
* Ensure that the service desk uses Quick Assist to take remote control of an employee's desktop during support calls.
* Automate the configuration of the contractors' computers. The solution must provide a configuration file that the contractors can open from a Microsoft SharePoint site to apply the required configurations.

NEW QUESTION 133
Your company has an isolated network used for testing. The network contains 20 computers that run Windows 10. The computers are in a workgroup. During testing, the computers must remain in the workgroup.
You discover that none of the computers are activated.
You need to recommend a solution to activate the computers without connecting the network to the Internet.
What should you include in the recommendation?

A. Key Management Service (KMS)
B. the Get-WindowsDeveloperLicense
C. Volume Activation Management Tool (VAMT)
D. Active Directory-based activation

Answer: C

Explanation:
Explanation
https://docs.microsoft.com/en-us/windows/deployment/volume-activation/introduction-vamt

NEW QUESTION 134
Your network contains an Active Directory domain named contoso.com. The domain contains two computers named Computer1 and Computer2 that run Windows 10 and are joined to the domain.
On Computer1, you create an event subscription named Subscription1 for Computer2 as shown in the Subscription1 exhibit. (Click the Subcription1 tab.)

Subscription1 is configured to use forwarded events as the destination log.
On Computer1, you create a custom view named View1 as shown in the View1 exhibit. (Click the View1 tab.)

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 135
SIMULATION
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password

Use the following login credentials as needed:
To enter your password, place your cursor in the Enter password box and click on the password below.
Username: Contoso/Administrator
Password: Passw0rd!
The following information is for technical support purposes only:
Lab Instance: 11145882

You need to ensure that Windows feature updates on Client1 are deferred for 15 days when the updates become generally available.
To complete this task, sign in to the required computer or computers.

A. Select the Start button, then select Settings > Update & Security > Windows Update.
* Under Update settings, select Advanced options.
* From the boxes under Choose when updates are installed, select the number of days you would like to defer a feature update or a quality update.
B. Select the Start button, then select Settings < Update & Security < Windows Update.
* Under Update settings, select Advanced options.
* From the boxes under Choose when updates are installed, select the number of days you would like to defer a feature update or a quality update.

Answer: A

Explanation:
Reference:
https://support.microsoft.com/en-us/help/4026834/windows-10-defer-feature-updates

NEW QUESTION 136
You have a computer that runs Windows 10. The computer contains a folder named C:\ISOs that is shared in ISOs.
You run several commands on the computer as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

Explanation

NEW QUESTION 137
You need to implement a solution to configure the contractors' computers.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

References:
https://docs.microsoft.com/en-us/windows/configuration/provisioning-packages/provisioning-install-icd

NEW QUESTION 138
You have a workgroup computer named Computer1 that runs Windows 10 and has the users shown in the following table.

Computer1 contains an image file named C:\Folder\Image.jpg.
Computer1 has the Local Computer\Administrators Policy shown in the following table.

Computer1 has the Local Computer\Non-Administrators Policy shown in the following table.

Computer1 has the local computer policy shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.