Feb-2023 HP HPE2-T37 Actual Questions and 100% Cover Real Exam Questions
HPE2-T37 Free Exam Questions and Answers PDF Updated on Feb-2023
NEW QUESTION 45
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As an application running on the server with Windows system.
- B. As an application running on the server with CentOS Linux system
- C. As a virtual appliance running on the supported hypervisor.
- D. As a physical appliance based on HPE ProLiant 360 Gen 10.
Answer: D
NEW QUESTION 46
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Interconnect
- B. Logical Enclosure
- C. Logical Interconnect Group
- D. Server Profile
Answer: D
NEW QUESTION 47
Refer to the exhibit.
Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?
- A. Some master modules only support a redundant setup.
- B. Firmware on the master modules is too low to support highly available setup.
- C. There are not sufficient frames for highly available setup.
- D. A dedicated license must be added to HPE OneView to enable this feature.
Answer: A
NEW QUESTION 48
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView Global Dashboard allows server profile replication and change management.
- B. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- C. PowerShell Library for HPE OneView allows scripted environment modification.
- D. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
Answer: B
NEW QUESTION 49
Refer to the exhibit.
Which statement about server connections is true?
- A. Ethernet connection is configured to boot from PXE
- B. All connections within the server profile are using physical IDs
- C. Storage array is connected directly to an HPE Synergy frame
- D. LACP on downlinks is configured for Ethernet connection
Answer: A
NEW QUESTION 50
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. An external repository must be created, because standalone components are supported only In an external repository.
- B. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- C. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
- D. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
Answer: B
NEW QUESTION 51
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Firmware deployment support dump
- B. Enclosure group support dump
- C. Logical enclosure support dump
- D. Maintenance console support dump
- E. Appliance support dump
Answer: C,E
NEW QUESTION 52
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Volume presentation through server profile will work with the discovered state.
- B. Volume provisioning will only work for arrays that ate accessible through these SANs.
- C. Snapshot functionality will be limited only to the volumes not using these SANs.
- D. Auto-zoning functionality will not work until SANs are associated with networks.
Answer: A
NEW QUESTION 53
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment
- A. A Rack Management Controller must be added to HPE OneView.
- B. Each HPE Superdome Flex chassis must be added Individually using BMC IP.
- C. HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
- D. HPE Superdome Flex complex can be added by adding base chassis of this complex.
Answer: A
NEW QUESTION 54
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are configured with a purpose other than General or Management.
- B. The other networks have Private Network' selected, which hides them from Compute Modules.
- C. The other networks are not added to the Logical Interconnect Group configuration.
- D. The other networks are not configured with the required Smart Link parameter.
Answer: B
NEW QUESTION 55
For HPE Primera, match each task with the management tool that can be used to perform it.
Answer:
Explanation:
NEW QUESTION 56
What event occurs on iLO when an HPE ProLiant server is added to HPE OneView?
- A. IPMI credentials are configured for the iLO
- B. SSO certificate is added to the iLO
- C. REST API plugin is enabled for iLO
- D. Active Directory configuration is performed on iLO
Answer: C
NEW QUESTION 57
Which statement about managing an HPE BiaoeSystem sever is true?
- A. Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring
- B. A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers
- C. An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure
- D. An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section
Answer: D
NEW QUESTION 58
Which statement about RoCE network restrictions is true?
- A. RoCE networks require Virtual Connect SE 32Gb FC Modules.
- B. RoCE networks cannot be configured when Virtual Connect modules are used.
- C. RoCE networks are not supported with HPE BladeSystem
- D. RoCE networks are supported only when PVLANs are enabled.
Answer: C
NEW QUESTION 59
You need to make sure that server ports connected to this network cannot communicate with each other within the logical interconnect. Click the option within the network definition that will allow you to configure the required parameter.
Answer:
Explanation:
NEW QUESTION 60
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView Global Dashboard allows server profile replication and change management.
- B. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- C. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- D. PowerShell Library for HPE OneView allows scripted environment modification.
Answer: C
NEW QUESTION 61
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView Global Dashboard allows server profile replication and change management.
- B. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- C. PowerShell Library for HPE OneView allows scripted environment modification.
- D. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
Answer: C
NEW QUESTION 62
You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.
In which scenario should you set redundancy for master modules to be highly available?
- A. When each of the frames has two Virtual Connect modules installed
- B. When each Virtual Connect module is installed in different fabric
- C. When each Virtual Connect module is installed in different frame
- D. When storm control or loop protection will be enabled for Virtual Connect modules
Answer: D
NEW QUESTION 63
Your workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within Logical Interconnect Group and update all servers.
- B. Set a specific workload profile within server profile template and update all profiles.
- C. Set a specific workload profile using IL0 interface for each individual server.
- D. Set a specific workload profile for all managed servers as an HPE OneView global setting.
Answer: B
NEW QUESTION 64
what is required to add a remote frame to the primary management ring?
- A. Request code from the primary HPE Composer
- B. Remote frame Link Module IPv6 address
- C. Serial number of one of the remote frames
- D. UUD of the remote HPE Composer
Answer: A
NEW QUESTION 65
You are deploying HPE OneView to manage a customer's HPE ProLiant servers Is this statement about appliance availability true?
- A. HPE OneView has a built-in HA feature that can be activated with an additional license
- B. HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster
- C. During hpe oneView deployment customer may select configure proprietary HA mode.
- D. HPE OneView availability relies on HA features provoed by the hypervisor
Answer: D
NEW QUESTION 66
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Enclosure
- B. Logical Interconnect
- C. Server Profile
- D. Logical Interconnect Group
Answer: A
NEW QUESTION 67
Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.
Answer:
Explanation:
NEW QUESTION 68
Click the option that will allow you to update the firmware of master and satellite modules.
Answer:
Explanation:
NEW QUESTION 69
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. All of the components are up to date and compliant with firmware baseline.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. The firmware repository service must be restarted using maintenance connection.
- D. The firmware repository is not defined within firmware compliance report.
Answer: C
NEW QUESTION 70
......
HP HPE2-T37 Real 2023 Braindumps Mock Exam Dumps: https://www.fast2test.com/HPE2-T37-premium-file.html
Latest HPE2-T37 Exam Dumps Recently Updated 81 Questions: https://drive.google.com/open?id=1bV7VBklD63KxEBhgApAjHok5OwLdsp_U