Free HP HPE0-J69 Study Guides Exam Questions & Answer [Q36-Q53]

Free HP HPE0-J69 Study Guides Exam Questions and Answer

HPE0-J69 Exam Dumps, HPE0-J69 Practice Test Questions

HP HPE0-J69 exam is a 90-minute exam that consists of 40-60 multiple-choice questions. HPE0-J69 exam is available in English and Japanese and can be taken at any Pearson VUE testing center around the world. HPE0-J69 exam is designed to test the candidate's knowledge in various areas such as HPE 3PAR StoreServ Storage, HPE StoreOnce Systems, HPE StoreVirtual Storage, and HPE Nimble Storage. Candidates who pass the exam will be certified as HPE Storage Solutions experts and will have the skills and knowledge to implement and manage HPE storage solutions in their organization.

NEW QUESTION # 36
You are designing a new storage environment for a customer. They need good performance, but need to keep costs to a minimum.
They have a very limited staff, and staff is concerned about learning new technologies. You plan to recommend a Nimble HF20 solution.
Which storage connectivity components should you recommend?

A. FlexFabric switches, Nimble iSCSI card. FC adapters for servers
B. Ethernet switches, Nimble FC card, dedicated FC for servers
C. Ethernet switches, Nimble iSCSI card, dedicated NICs for servers
D. FC switches, Nimble FC card, FC adapters for servers

Answer: C

NEW QUESTION # 37
You have proposed a Primera array to a customer for new primary storage. The customer currently has an older 3PAR array that they will continue to use moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

A. No license is required
B. 2-port 10 Gb Ethernet Adapter (NIC) is required
C. Target drive type must match source drive type
D. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
E. RMC 6.2 is required

Answer: D,E

NEW QUESTION # 38
A customer recently acquired another company and found that the existing infrastructure was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly and possible. Which solution you recommend?

A. Simplicity 380
B. Synergy 12000
C. Converged systems
D. Bladesystem 7000

Answer: A

NEW QUESTION # 39
Which tool is used to provide centralized management of 3PAR and Primera arrays?

A. WebUI
B. Primera UI
C. SMU
D. SSMC

Answer: D

NEW QUESTION # 40
Which HPE 3Par feature improves CPU utilization ,reduces latency and improve IOPS ?

A. Express Writes
B. Persistent Cache
C. Zero Detect
D. Express Indexing

Answer: A

NEW QUESTION # 41
Match the HPE converged Strategy principle with its function

A. Thin provisioning:-Reduce TCO ,Opex and CPEx by using virtualization technology to make storage resources more efficient.
B. Storage tiering:-Use combination of I/O accelerator to place data to meet price, performance, and latency requirements .
C. Deduplication:-Reduce allocated capacity by eliminating data redundancy
D. Storage virtualization:- Deliver simplified management ,higher utilization ,efficient, and agility by separating the logical and physical resource.
E. Federated Storage:- Move data between storage systems in peer-to-peer relationship simply, dynamically and nondestructively

Answer: D

NEW QUESTION # 42
A customer environment includes:
10 DL380 Gen8 servers in a VMware Cluster
2 MSA storage arrays
2 8GB b-series fibre channel switches
The customer needs to replace their environment because it is end of life. They have limited budget. The customer is primarily concerned with management because they have limited IT staff, and they want to move away from fibre channel.
Which HPE Storage should you recommend?

A. HPE StoreOnce
B. HPE Primera
C. HPE XP8
D. HPE Nimble dHCI

Answer: B

NEW QUESTION # 43
A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase- adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new adapter is not configurable.
What is the most likely reason for this issue?

A. Secure boot must be enabled in the BIOS to securely enable HBAs
B. The StoreOnce software requires updating
C. The StoreOnce needs to connect to InfoSight to validate the adapter authenticity
D. The customer failed to install a License to Use (LTU) for it

Answer: B

NEW QUESTION # 44
A customer needs a centralized solution for storing departmental data to be accessed by Windows-based laptops and other personal devices.
Which solution should you recommend?

A. Block storage, directly accessed over SAS
B. File-oriented storage, accessed over SMB
C. Object storage, accessed over S3 connector
D. Block storage, directly accessed over FC

Answer: A

NEW QUESTION # 45
A customer successfully implemented an HPE Primera solution.
Which tool can be used to verify performance counters, such as IOPS, match customer requirements?

A. Primera on-node management GUI
B. OneView
C. NinjaCrawler
D. Recovery Manager Central

Answer: A

NEW QUESTION # 46
You are designing a new HPE 3PAR StoreServ solution.
Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?

A. One Config Advanced
B. SAF Collect
C. Storage Sizing Tool
D. NinjaSTARS

Answer: A

NEW QUESTION # 47
A customer is implementing a new high performance database environment.
What type of storage should you recommend?

A. object store
B. network-attached storage
C. system-defined storage
D. scale-out storage

Answer: D

NEW QUESTION # 48
A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?

A. HPE Synergy Image Streamer
B. HPE InfoSight for 3PAR
C. HPE Synergy Composer
D. HPE SAN Network Advisor

Answer: C

NEW QUESTION # 49
A customer is concerned about the business risks of non-compliance for long-term data protection, retention, immutability, and encryption on petabytes of data consisting of millions of objects in a global namespace across multiple geographic locations.
Which products should you recommend to the customer to address their concern? (Choose two.)

A. HPE Scality RING on HPE Apollo Servers
B. HPE Complete iTernity iCAS
C. HPE StoreOnce Systems
D. HPE 3PAR StoreServ 9000
E. HPE Complete Veeam

Answer: B,C

NEW QUESTION # 50
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)

A. HPE 3PAR File persona Software suite
B. HPE 3PAR Virtual Copy software
C. HPE 3PAR Security software suite
D. HPE 3PAR Remote copy software
E. HPE StoreOnce recovery manager central for VMware

Answer: B,E

NEW QUESTION # 51
During Technology workshop ,the customer asks about different between converged and fibre channel switches. What would be a benefits of using flex fabric switches in a fibre channel storage environment?

A. In-flight compression and encryption provides efficient link utilization and security
B. Zones can be configured for QoS with high ,medium, and low priorities within a fabric on a zone by zone basic
C. Support for six Ethernet and two fibre channel ,or six Ethernet and two ISCSI or eight Ethernet adapters per server.
D. Support for combining multiple physical switches in to one virtual switch with a single IP address

Answer: D

NEW QUESTION # 52
An existing Nimble customer is interested in adding storage to their environment to store his Backups, but has a constrained budget and limited personal .The solution must scale to allow for substantial growth over the next five years?