Get Aug-2022 updated Exam JN0-635 Dumps with New Questions
100% Pass Guarantee for JN0-635 Exam Dumps with Actual Exam Questions
Juniper JN0-635 Exam Topics:
| Section | Objectives |
|---|---|
| Compliance | Describe the concepts or operation of security compliance
|
| Advanced IPsec | Describe the concepts, operation, or functionality of advanced IPsec application
Given a scenario, demonstrate how to configure, troubleshoot, or monitor advanced IPsec functionality |
| Logical and Tenant Systems | Describe the concepts, operation, or functionality of the logical systems
Describe the concepts, operation, or functionality of the tenant systems
|
| Firewall Filters | Describe the concepts, operation, or functionality of firewall filters and ACLs
Given a scenario, demonstrate how to configure, troubleshoot, or monitor firewall filters |
| Troubleshooting Security Policy and Zones | Given a scenario, demonstrate how to troubleshoot or monitor security policies or security zones
|
| Edge Security | Describe the concepts, operation, or functionality of edge security features
|
| Threat Mitigation | Describe the concepts, operation, or functionality of threat mitigation
Given a scenario, demonstrate how to configure or monitor threat mitigation |
| Layer 2 Security | Describe the concepts, operation, or functionality of Layer 2 security
Given a scenario, demonstrate how to configure or monitor Layer 2 security |
| Advanced Network Address Translation | Describe the concepts, operation, or functionality of advanced NAT functionality
Given a scenario, demonstrate how to configure, troubleshoot, or monitor advanced NAT scenarios |
| Advanced Threat Protection | Describe the concepts, operation, or functionality of Juniper ATP
Given a scenario, demonstrate how to configure or monitor Juniper ATP |
Exam JN0-635 must be taken to achieve the JNCIP-SEC certification, which is a professional Security designation offered by the renowned Juniper Networks. This vendor provides various security certificates at different levels such as associate (JNCIA-SEC), specialist (JNCIS-SEC), professional (JNCIP-SEC), and expert (JNCIE-SEC). For the professional level, the JNCIP-SEC certification is available, which targets networking specialists with substantial working experience and expertise in the Juniper Networks Junos OS for SRX Series gadgets. With this certificate, you can validate your security skills by utilizing advanced security technologies, the configuration of platforms, and troubleshooting techniques.
Apart from the official training, the following books can also be accessed as preparatory resources for JN0-635 test:
- 1st Edition of Juniper SRX Series: A Comprehensive Guide to Security Services on the SRX Series by B. Woodberg, and R. Cameron
A Kindle book like this can be bought via Amazon for $48.99 or you can try the eBook for free. This is a Juniper Networks authorized guide that covers not only SRX operation and deployment but also SRX Series devices. Topics covered here include SRX gateways usage, IP routing, attack mitigation, threat management, using SRX as a Layer 2 bridge, security against threats, configuration, troubleshooting, deploying SRX, implementing network address translation (NAT) types, and more.
- How I Passed JN0-635 Security Professional (JNCIP-SEC) Exam: Successfully Proven Tips by Canrosartain Publications
This guide is available to purchase on Amazon for almost $12. This book provides several tips that you can use to pass your JN0-635 exam successfully. What’s more, this book has a free coupon that will give you access to free practice test questions available at Vullam. So, if you want to ace this exam on the first try, you should definitely avail yourself of this manual.
- 1st Edition of Junos Security: A Guide to Junos for the SRX Services Gateways and Security Certification by R. Cameron, B. Woodberg, P. Giecco, T. Eberhard, and J. Quinn
This book is available from Amazon in the Kindle format for slightly more than $40. This is the introductory guide that is authorized for the new Juniper Networks SRX series for hardware. With it, you will gain practical insight into topics including executing, building up, and operating SRX that gives you a reliable reference to gear up for any Junos Security tests.
NEW QUESTION 36
You correctly configured a security policy to deny certain traffic, but logs reveal that traffic is still allowed.
Which specific traceoption flag will help you troubleshoot this problem?
- A. lookup
- B. routing-socket
- C. rules
- D. configuration
Answer: A
NEW QUESTION 37
Which two statements are true about ADVPN members? (Choose two.)
- A. ADVPN members are authenticated using pre-shared keys
- B. ADVPN members can use IKEv2
- C. ADVPN members are authenticated using certificates
- D. ADVPN members can use IKEv1
Answer: B,C
NEW QUESTION 38
Exhibit.
Referring to the exhibit, a spoke member of an ADVPN is not functioning correctly.
Which two commands will solve this problem? (Choose two.)
- A. [edit interfaces]
user@srx# delete st0.0 multipoint - B. [edit security ike gateway advpn-gateway]
user@srx# set advpn suggester disable - C. [edit security ike gateway advpn-gateway]
user@srx# set version v1-only - D. [edit security ike gateway advpn-gateway]
user@srx# delete advpn partner
Answer: B,D
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery-vpns.html
NEW QUESTION 39
According to the log shown in the exhibit, you notice the IPsec session is not establishing.
What is the reason for this behavior?
- A. Incorrect peer address.
- B. Mismatched preshared key
- C. Mismatched proxy ID
- D. Mismatched peer ID
Answer: D
Explanation:
Reference:
https://www.juniper.net/documentation/en_US/release-independent/nce/topics/example/policy-based-vpn-using-j-series-srxseries-device-configuring.html
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. You can secure intra-VLAN traffic with a security policy on this device
- B. The device cannot pass Layer 2 and Layer 3 traffic at the same time
- C. The device can pass Layer 2 and Layer 3 traffic at the same time
- D. You can secure inter-VLAN traffic with a security policy on this device
Answer: A,B
NEW QUESTION 41
What is a function of UTM?
- A. AppFW
- B. IPsec
- C. bridge mode
- D. content filtering
Answer: D
NEW QUESTION 42
Click the Exhibit button.
Your company has purchased a competitor and now must connect the new network to the existing one. The competitor's gateway device is receiving its ISP address using DHCP. Communication between the two sites must be secured; however, obtaining a static public IP address for the new site gateway is not an option at this time. The company has several requirements for this solution:
* A site-to-site IPsec VPN must be used to secure traffic between the two sites;
* The IKE identity on the new site gateway device must use the hostname option; and
* Internet traffic from each site should exit through its local Internet connection.
The configuration shown in the exhibit has been applied to the new site's SRX, but the secure tunnel is not working.
In this scenario, what configuration change is needed for the tunnel to come up?
- A. Apply a static address to ge-0/0/2
- B. Remove the quotes around the hostname
- C. Change the IKE policy mode to aggressive
- D. Bind interface st0 to the gateway
Answer: B
NEW QUESTION 43
Which three roles or protocols are required when configuring an ADVPN? (Choose three.)
- A. OSPF
- B. shortcut suggester
- C. shortcut partner
- D. IKEv1
- E. BGP
Answer: A,B,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery- vpns.html
NEW QUESTION 44
You opened a support ticket with JTAC for your Juniper ATP appliance. JTAC asks you to set up access to the device using the reverse SSH connection.Which three setting must be configured to satisfy this request? (Choose three.)
- A. Create a temporary root account.
- B. Enable JTAC remote access
- C. Enable remote support.
- D. Create a temporary admin account.
- E. Enable a JATP support account.
Answer: C,D,E
Explanation:
Reference:
https://kb.juniper.net/InfoCenter/index?page=content&id=TN326&cat=&actp=LIST&showDraft=false
NEW QUESTION 45
In which two ways are tenant systems different from logical systems? (Choose two.)
- A. Tenant systems have less scalability than logical systems
- B. Tenant systems have fewer routing features than logical systems
- C. Tenant systems have higher scalability than logical systems
- D. Tenant systems have more routing features than logical systems
Answer: B,C
NEW QUESTION 46
You are scanning files that are being transferred from the Internet to hosts on your internal network with Sky ATP. However, you notice that files that are 1 GB in size are not being scanned by Sky ATP.
In this scenario, which two statements are true? (Choose two.)
- A. The Sky ATP engine or the SRX Series device is too busy.
- B. The Sky ATP policy on the SRX Series device is misconfigured.
- C. The Sky ATP failback option is set to permit.
- D. The 1 GB file size is larger than the scan size limit for Sky ATP.
Answer: B,D
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/sky-
atp/topics/reference/general/sky-atp-policy-overview.html
NEW QUESTION 47
Click the Exhibit button.
You deployed a site-to-site IPsec VPN connecting two data centers together using SRX5800s.
After examining the performance of the IPsec VPN, you decide to enable IPsec performance acceleration to increase the rate of traffic that can be sent through the tunnel.
Referring to the exhibit, which two statements should you add to the configuration to accomplish this task? (Choose two.)
- A. [edit security flow]
user@srx# set power-mode-ipsec - B. [edit security flow]
user@srx# set load-distribution session-affinity ipsec - C. [edit security flow]
user@srx# set ipsec-performance-acceleration - D. [edit security flow]
user@srx# set tcp-mss ipsec-vpn mss 65535
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-improving-ipsec- vpn-traffic-performance.html
NEW QUESTION 48
To which three UTM components would the custom-objects parameter apply? (Choose three.)
- A. antivirus
- B. antispam
- C. content filtering
- D. Web filtering
- E. Sky ATP
Answer: B,C,D
NEW QUESTION 49
Exhibit.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The c-1 TSYS cannot use any security flow resources.
- B. The c-1 TSYS has a reservation for the security flow resource.
- C. The c-1 TSYS can use security flow resources up to the system maximum.
- D. The c-1 TSYS has no reservation for the security flow resource.
Answer: A,D
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-profile-logical-system.html
NEW QUESTION 50
Your SRX Series device does not see the SYN packet.
What is the default action in this scenario?
- A. The device will drop the subsequent packets and the session will not be established
- B. The device will drop the subsequent packets and the session will be established
- C. The device will forward the subsequent packets and the session will not be established
- D. The device will forward the subsequent packets and the session will be established
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-tcp-session- checks.html
NEW QUESTION 51
You have a webserver and a DNS server residing in the same internal DMZ subnet.
The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface.
You implement DNS doctoring to ensure remote users can access the webserver.
Which two statements are true in this scenario? (Choose two.)
- A. The Proxy ARP feature must be configured.
- B. The DNS doctoring ALG is not enabled by default.
- C. The DNS CNAME record is translated.
- D. The DNS doctoring ALG is enabled by default.
Answer: A,D
NEW QUESTION 52
In which two ways are tenant systems different from logical systems? (Choose two.)
- A. Tenant systems have less scalability than logical systems
- B. Tenant systems have fewer routing features than logical systems
- C. Tenant systems have higher scalability than logical systems
- D. Tenant systems have more routing features than logical systems
Answer: B,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/tenant-systems- overview.html#:~:text=Although%20similar%20to%20logical%20systems,administrative%20domain%20for
%20security%20services
NEW QUESTION 53
Click the Exhibit button.
You have two hosts on the same subnet connecting to an SRX340 on interfaces ge-0/0/4 and ge-
0/0/5. However, the two hosts cannot communicate with each other.
Referring to the exhibit, what are two actions that would solve this problem? (Choose two.)
- A. Add an IRB interface to the VLAN
- B. Put the ge-0/0/4 and ge-0/0/5 interfaces in different VLANs
- C. Set the SRX340 to Ethernet switching mode and reboot
- D. Remove the ge-0/0/4 and ge-0/0/5 interfaces from the L2 security zone
Answer: C,D
NEW QUESTION 54
Which two VPN features are supported with CoS-based IPsec VPNs? (Choose two.)
- A. IKEv2
- B. VPN monitoring
- C. dead peer detection
- D. IKEv1
Answer: A,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/secuirty-cos-based-ipsec- vpns.html
NEW QUESTION 55
......
JN0-635 exam dumps with real Juniper questions and answers: https://www.fast2test.com/JN0-635-premium-file.html