Get instant access to NSE6_FWF-6.4 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader NSE6_FWF-6.4 PDF dumps ( 30 Q&As)
NEW QUESTION 11
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Preauthorize APs
- B. Create a custom AP profile
- C. Set the wireless controller country setting
- D. Create wireless LAN specific policies
Answer: B
NEW QUESTION 12
Part of the location service registration process is to link FortiAPs in FortiPresence.
Which two management services can configure the discovered AP registration information from the FortiPresence cloud? (Choose two.)
- A. AP Manager
- B. FortiAP Cloud
- C. FortiSwitch
- D. FortiGate
Answer: B,D
Explanation:
FortiGate, FortiCloud wireless access points (send visitor data in the form of station reports directly to FortiPresence)
NEW QUESTION 13
Which two statements about background rogue scanning are correct? (Choose two.)
- A. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. Background rogue scanning requires DARRP to be enabled on the AP instance
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: A,D
Explanation:
To enable rogue AP scanning
NEW QUESTION 14
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag ksta command
- C. On the AP CLI, using the cw_diag -d sta command
- D. On the controller CLI, using the WiFi Client monitor
Answer: A
NEW QUESTION 15
Refer to the exhibits.
Exhibit A
Exhibit B
The exhibits show the diagnose debug log of a station connection taken on the controller CLI.
Which security mode is used by the wireless connection?
- A. Open, with radius MAC filtering
- B. WPA2 Enterprise
- C. WPA2 Personal and radius MAC filtering
- D. WPA3 Enterprise
Answer: B
Explanation:
Best security option is WPA2-AES.
NEW QUESTION 16
Which two statements about distributed automatic radio resource provisioning (DARRP) are correct? (Choose two.)
- A. DARRP measurements can be scheduled to occur at specific times.
- B. DARRP requires that wireless intrusion detection (WIDS) be enabled to detect neighboring devices.
- C. DARRP performs measurements of the number of BSSIDs and their signal strength (RSSI). The controller then uses this information to select the optimum channel for the AP.
- D. DARRP performs continuous spectrum analysis to detect sources of interference. It uses this information to allow the AP to select the optimum channel.
Answer: B,D
Explanation:
DARRP (Distributed Automatic Radio Resource Provisioning) technology ensures the wireless infrastructure is always optimized to deliver maximum performance. Fortinet APs enabled with this advanced feature continuously monitor the RF environment for interference, noise and signals from neighboring APs, enabling the FortiGate WLAN Controller to determine the optimal RF power levels for each AP on the network. When a new AP is provisioned, DARRP also ensures that it chooses the optimal channel, without administrator intervention.
NEW QUESTION 17
Which statement describes FortiPresence location map functionality?
- A. Provides real-time insight into user online activity
- B. Provides real-time insight into user purchase activity
- C. Provides real-time insight into user usage stats
- D. Provides real-time insight into user movements
Answer: C
Explanation:
This geographical data analysis provides real-time insights into user behavior.
NEW QUESTION 18
Which factor is the best indicator of wireless client connection quality?
- A. The channel utilization of the channel the client is using
- B. Downstream link rate, the connection rate for the AP to the client
- C. The receive signal strength (RSS) of the client at the AP
- D. Upstream link rate, the connection rate for the client to the AP
Answer: C
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION 19
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?
- A. Security Fabric and HTTPS must be enabled on the wireless network interface
- B. The wireless network interface must be assigned a Layer 3 address
- C. The wireless network to Internet firewall policy must be configured
- D. The new network must be manually assigned to a FortiAP profile.
Answer: C
Explanation:
A FortiGate unit is an industry leading enterprise firewall. In addition to consolidating all the functions of a network firewall, IPS, anti-malware, VPN, WAN optimization, Web filtering, and application control in a single platform, FortiGate also has an integrated Wi-Fi controller.
NEW QUESTION 20
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured for WPA2 or 3 Enterprise
- B. A VAP configured for captive portal authentication
- C. A VAP configured to authenticate locally on FortiGate
- D. A VAP configured to authenticate using a radius server
Answer: A,D
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION 21
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?
- A. Clone a suitable FortiAP profile and change the county code settings on the profile
- B. Configure the APs individually by overriding the settings in Managed FortiAPs
- C. Configure the controller for the correct country code for Germany
- D. Create a new FortiAP profile and change the county code settings on the profile
Answer: A
NEW QUESTION 22
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Site survey phase
- C. Installation phase
- D. Hardware selection phase
Answer: B,C
Explanation:
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design
NEW QUESTION 23
......
Nov-2021 Latest Fast2test NSE6_FWF-6.4 Exam Dumps with PDF and Exam Engine: https://www.fast2test.com/NSE6_FWF-6.4-premium-file.html
Premium Quality Fortinet NSE6_FWF-6.4 Online dumps: https://drive.google.com/open?id=12jkRsz7MACZVm4Amtq5NC1bWbFtUAQut