Instant Download Nutanix: NCP-US-6.5 Free Updated Test Dumps
Valid NCP-US-6.5 FREE EXAM DUMPS QUESTIONS & ANSWERS
Nutanix NCP-US-6.5 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION # 36
An administrator has created a volume and needs to attach it to a windows host a via iSCSI. The data Services IP has been configured in the MS iSCSI Initiator, but no target are visible.
What is most likely the cause this issue?
- A. The CHAP password configured on the client is incorrect.
- B. The host's IQN is not authorized to access to the volume.
- C. The CHAP Authentication has not been configured on the client.
- D. The host' s IP address is not authorized to access the volume.
Answer: B
Explanation:
Nutanix Volumes uses IQN-based authorization to control access to volumes. The administrator must specify the IQN of the host that needs to access the volume when creating or editing the volume. If the host's IQN is not authorized, it will not be able to see the target in the MS iSCSI Initiator3. Reference: Nutanix Volumes Administration Guide3
NEW QUESTION # 37
An administrator has discovered that File server services are down on a cluster.
Which service should the administrator investigation for this issue?
- A. Insights_collector
- B. Minerva-nvm
- C. Cassandra
- D. Sys_stats_server
Answer: B
Explanation:
The service that the administrator should investigate for this issue is Minerva-nvm. Minerva-nvm is a service that runs on each CVM and provides communication between Prism Central and Files services. Minerva-nvm also monitors the health of Files services and reports any failures or alerts to Prism Central. If Minerva-nvm is down on any CVM, it can affect the availability and functionality of Files services on that cluster. Reference: Nutanix Files Administration Guide, page 23; Nutanix Files Troubleshooting Guide
NEW QUESTION # 38
Which action is required to allow the deletion of file server audit data in Data Lens?
- A. Update the data retention period.
- B. Configure the audit trail target.
- C. Enable the File Server.
- D. Disable the File Server.
Answer: A
Explanation:
The action that is required to allow the deletion of file server audit data in Data Lens is to update the data retention period. Data retention period is a setting that defines how long Data Lens keeps the file server audit data in its database. Data Lens collects and stores various metadata and statistics from file servers, such as file name, file type, file size, file owner, file operation, file access time, etc. Data Lens uses this data to generate reports and dashboards for file analytics and anomaly detection. The administrator can update the data retention period for each file server in Data Lens to control how long the audit data is kept before being deleted. Reference: Nutanix Files Administration Guide, page 98; Nutanix Data Lens User Guide
NEW QUESTION # 39
An administrator is tasked with creating an Objects store with the following settings:
* Medium Performance (around 10,000 requests per second)
* 10 TiB capacity
* Versioning disabled
* Hosted on an AHV cluster
immediately after creation, the administrator is asked to change the name of Objects store Who will the administrator achieve this request?
- A. The Objects store can only be renamed if hosted on ESXI.
- B. Enable versioning and then rename the Object store, disable versioning
- C. Delete and recreate a new Objects store with the updated name
Answer: C
Explanation:
The administrator can achieve this request by deleting and recreating a new Objects store with the updated name. Objects is a feature that allows users to create and manage object storage clusters on a Nutanix cluster. Objects clusters can provide S3-compatible access to buckets and objects for various applications and users. Objects clusters can be created and configured in Prism Central. However, once an Objects cluster is created, its name cannot be changed or edited. Therefore, the only way to change the name of an Objects cluster is to delete the existing cluster and create a new cluster with the updated name. Reference: Nutanix Objects User Guide, page 9; Nutanix Objects Solution Guide, page 8
NEW QUESTION # 40
Which Nutanix Unified Storage capability allows for monitoring usage for all Files deployment globally?
- A. Files Manager
- B. File Analytics
- C. Data Lens
- D. Nutanix Cloud Manager
Answer: C
Explanation:
Data Lens is a feature that provides insights into the data stored in Files across multiple sites, including different geographical locations. Data Lens allows administrators to monitor usage, performance, capacity, and growth trends for all Files deployments globally. Data Lens also provides reports on file types, sizes, owners, permissions, and access patterns3. Reference: Nutanix Data Lens Administration Guide3
NEW QUESTION # 41
What is a mandatory criterion for configuring Smart Tier?
- A. Certificate
- B. VPC name
- C. Access and secret keys
- D. Target URL over HTTP
Answer: C
Explanation:
Smart Tier requires access and secret keys to authenticate with the target storage tier, which can be Nutanix Objects or any S3-compatible storage service. The access and secret keys are generated by the target storage service and must be provided when configuring Smart Tier3. Reference: Nutanix Files Administration Guide3
NEW QUESTION # 42
Which ransomware prevention solution for Files is best when the list of malicious file signatures to block is greater than 300?
- A. File Analytics
- B. Third-party solution
- C. Flow Security Central
- D. Data Lens
Answer: B
Explanation:
Nutanix Files provides a built-in ransomware prevention feature that allows administrators to block malicious file signatures from being written to the file system. However, this feature has a limit of 300 signatures per share or export. If the list of malicious file signatures to block is greater than 300, a third-party solution is recommended2. Reference: Nutanix Files Administration Guide2
NEW QUESTION # 43
An administrator has been tasked with creating a distributed share on a single-node cluster, but has been unable to successfully complete the task.
Why is this task failing?
- A. Number of distributed shares limit reached.
- B. AOS version should be greater than 6.0.
- C. File server version should be greater than 3.8.0
- D. Distributed shares require multiple nodes.
Answer: D
Explanation:
A distributed share is a type of SMB share or NFS export that distributes the hosting of top-level directories across multiple FSVMs, which improves load balancing and performance. A distributed share cannot be created on a single-node cluster, because there is only one FSVM available. A distributed share requires at least two nodes in the cluster to distribute the directories. Therefore, the task of creating a distributed share on a single-node cluster will fail. Reference: Nutanix Files Administration Guide, page 33; Nutanix Files Solution Guide, page 8
NEW QUESTION # 44
Within the Prism Central Entity > Services > Objects menu option, what is the correct task order for creating an object storage?
Answer:
Explanation:
NEW QUESTION # 45
Which user is authorized to deploy File Analytics?
- A. Prism Central administrator
- B. AD user mapped to a Cluster admin role
- C. AD user mapped to a Prism admin role
- D. Prism Element administrator
Answer: A
Explanation:
The user that is authorized to deploy File Analytics is Prism Central administrator. Prism Central is a web-based user interface that allows administrators to manage multiple Nutanix clusters and services, including Files and File Analytics. Prism Central administrator is a user role that has full access and control over all Prism Central features and functions. To deploy File Analytics, the user must log in to Prism Central as a Prism Central administrator and follow the steps in the File Analytics Deployment wizard. Reference: Nutanix Files Administration Guide, page 93; Nutanix File Analytics Deployment Guide
NEW QUESTION # 46
An administrator needs to ensure maximum performance, throughput, and redundancy for the company's Oracle RAC on Linux implementation, while using the native method for securing workloads.
Which configuration meets these requirements?
- A. Volumes with CHAP and multiple vDisks
- B. Files with a general purpose share and File Blocking
- C. Volumes with MPIO and a single vDisk
- D. Flies with a distributed share and ABE
Answer: C
Explanation:
Volumes is a feature that allows users to create and manage block storage devices (volume groups) on a Nutanix cluster. Volume groups can be accessed by external hosts using the iSCSI protocol. To ensure maximum performance, throughput, and redundancy for Oracle RAC on Linux implementation, while using the native method for securing workloads, the recommended configuration is to use Volumes with MPIO (Multipath I/O) and a single vDisk (virtual disk). MPIO is a technique that allows multiple paths between an iSCSI initiator and an iSCSI target, which improves performance and availability. A single vDisk is a logical unit number (LUN) that can be assigned to multiple hosts in a volume group, which simplifies management and reduces overhead. Reference: Nutanix Volumes Administration Guide, page 13; Nutanix Volumes Best Practices Guide
NEW QUESTION # 47
An administrator needs to protect a Files cluster unique policies for different shares.
How should the administrator meet this requirement?
- A. Create a protection domain in the Data Protection view in Prism Central.
- B. Create a protection domain in the Data Protection view in Prism Element.
- C. Configure data protection polices in File Server view in Prism Element
- D. Configure data protection polices in the Files view in Prism Central.
Answer: D
Explanation:
The administrator can meet this requirement by configuring data protection policies in the Files view in Prism Central. Data protection policies are policies that define how file data is protected by taking snapshots, replicating them to another site, or tiering them to cloud storage. Data protection policies can be configured for each share or export in a file server in the Files view in Prism Central. The administrator can create different data protection policies for different shares or exports based on their protection needs and requirements. Reference: Nutanix Files Administration Guide, page 79; Nutanix Files Solution Guide, page 9
NEW QUESTION # 48
An existing Object bucket was created for backups with these requirements:
* WORM policy of one year
* Versioning policy of one year
* Lifecycle policy of three years
A recent audit has reported a compliance failure. Data that should be retained for three years has been deleted prematurely.
How should the administrator resolve the compliance failure within Objects?
- A. Modify the existing bucket WORM policy from one year to three years.
- B. Modify the existing bucket versioning policy from one year to three years.
- C. Recreate a new bucket with the retention policy of three years.
- D. Create a tiering policy to store deleted data on cold storage for three years.
Answer: A
Explanation:
The administrator should resolve the compliance failure within Objects by modifying the existing bucket WORM (Write-Once Read-Many) policy from one year to three years. WORM is a feature that prevents anyone from modifying or deleting data in a bucket while the policy is active. WORM policies help comply with strict data retention regulations that mandate how long specific data must be stored. The administrator can extend the WORM retention period for a bucket at any time, but cannot reduce it or delete it. By extending the WORM policy from one year to three years, the administrator can ensure that data in the bucket is retained for the required duration and not deleted prematurely. Reference: Nutanix Objects User Guide, page 17; Nutanix Objects Solution Guide, page 9
NEW QUESTION # 49
What are two network requirements for a four-node FSVM deployment? (Choose two.)
- A. Four available IP addresses on the Storage network
- B. Five available IP addresses on the Storage network
- C. Four available IP addresses on the Client network
- D. Five available IP addresses on the Client network
Answer: D
Explanation:
The two network requirements for a four-node FSVM deployment are five available IP addresses on the Client network and five available IP addresses on the Storage network. The Client network is used for communication between the FSVMs and the clients, while the Storage network is used for communication between the FSVMs and the CVMs. For each FSVM, one Client IP and one Storage IP are required. Additionally, one extra Client IP is required for the file server VIP (Virtual IP), which is used as a single point of access for all shares and exports on the file server. Reference: Nutanix Files Administration Guide, page 28; Nutanix Files Solution Guide, page 7
NEW QUESTION # 50
What best describes the data protection illustrated in the exhibit?
- A. Smart DR
- B. Availability Zones
- C. NearSync
- D. Metro Availability
Answer: A
Explanation:
The data protection illustrated in the exhibit is Smart DR. Smart DR is a feature that allows share-level replication between active file server instances for disaster recovery. Smart DR can replicate shares from a primary FSI to one or more recovery FSIs on different clusters or sites. Smart DR can also perform failover and failback operations in case of a disaster or planned maintenance. The exhibit shows a Smart DR configuration with one primary FSI and two recovery FSIs. Reference: Nutanix Files Administration Guide, page 79; Nutanix Files Solution Guide, page 9
NEW QUESTION # 51
Immediately after creation, the administrator is asked to change the name of Objects store.
How will the administrator achieve this request?
- A. Update the name of the Objects stores by using a CORS XML file
- B. The Objects store can only be renamed if hosted on ESXi.
- C. Delete and recreate a new Objects store with the updated name.
- D. Enable versioning and then rename the Objects store, disable versioning
Answer: C
Explanation:
The administrator can achieve this request by deleting and recreating a new Objects store with the updated name. Objects is a feature that allows users to create and manage object storage clusters on a Nutanix cluster. Objects clusters can provide S3-compatible access to buckets and objects for various applications and users. Objects clusters can be created and configured in Prism Central. However, once an Objects cluster is created, its name cannot be changed or edited. Therefore, the only way to change the name of an Objects cluster is to delete the existing cluster and create a new cluster with the updated name. Reference: Nutanix Objects User Guide, page 9; Nutanix Objects Solution Guide, page 8
NEW QUESTION # 52
Which protocols are supported by Files?
- A. SMBv2 SMBv3, NFSv2, NFSv3
- B. SMBv1. SMBv2, NFSv3, NFSv4
- C. SMBv1. SMBv2, NFSv2, NFSv3
- D. SMBv2 SMBv3, NFSv3, NFSv4
Answer: D
Explanation:
The protocols that are supported by Files are SMBv2, SMBv3, NFSv3, and NFSv4. SMB (Server Message Block) is a protocol that allows clients to access files, printers, and other resources on a network. NFS (Network File System) is a protocol that allows clients to access files on a remote server as if they were local. Files supports both SMB and NFS protocols for creating shares and exports that can be accessed by different types of clients. Reference: Nutanix Files Administration Guide, page 31; Nutanix Files Solution Guide, page 6
NEW QUESTION # 53
Which Data Lens feature maximizes the available file server space by moving cold data from the file server to an object store?
- A. Smart DR
- B. Backup
- C. Smart Tier
- D. Versioning
Answer: C
Explanation:
The Data Lens feature that maximizes the available file server space by moving cold data from the file server to an object store is Smart Tier. Smart Tier is a feature that allows administrators to tier data from Files to cloud storage based on file age, file size, and file type. Smart Tier can help reduce the storage cost and optimize the performance of Files. Smart Tier can move cold data, which is data that has not been accessed or modified for a long time, from the file server to an object store, such as AWS Standard or Azure Blob, and free up the file server space for hot data, which is data that is frequently accessed or modified. Reference: Nutanix Files Administration Guide, page 99; Nutanix Files Solution Guide, page 11
NEW QUESTION # 54
An administrator successfully installed Objects and was able to create a bucket.
When using the reference URL to access this Objects store, the administrator is unable to write data in the bucket when using an Action Directory account.
Which action should the administrator take to resolve this issue?
- A. Verify Access Keys for the user.
- B. Replace SSL Certificates at the Object store level.
- C. Reset the Active Directory user password.
- D. Verify sharing policies at the bucket level.
Answer: A
Explanation:
The action that the administrator should take to resolve this issue is to verify Access Keys for the user. Access Keys are credentials that allow users to access Objects buckets using S3-compatible APIs or tools. Access Keys consist of an Access Key ID and a Secret Access Key, which are used to authenticate and authorize requests to Objects. If the user is unable to write data in the bucket using an Active Directory account, it may be because the user does not have valid Access Keys or the Access Keys do not have sufficient permissions. The administrator can verify and manage Access Keys for the user in Prism Central. Reference: Nutanix Objects User Guide, page 13; Nutanix Objects Solution Guide, page 8
NEW QUESTION # 55
Refer to the exhibit.
What does the ''X'' represent on the icon?
- A. Share Disconnected File
- B. Distributed shared file
- C. Corrupt ISO
- D. Tiered File
Answer: B
Explanation:
The "X" on the icon represents a distributed shared file, which is a file that belongs to a distributed share or export. A distributed share or export is a type of SMB share or NFS export that distributes the hosting of top-level directories across multiple FSVMs. The "X" indicates that the file is not hosted by the current FSVM, but by another FSVM in the cluster. The "X" also helps to identify which files are eligible for migration when using the Nutanix Files Migration Tool. Reference: Nutanix Files Administration Guide, page 34; Nutanix Files Migration Tool User Guide, page 10
NEW QUESTION # 56
What is the network requirement for a File Analytics deployment?
- A. Must use the CVM not work
- B. Must use the Storage-side network
- C. Must use the Client-side network
- D. Must use the Backplane network
Answer: C
Explanation:
Nutanix File Analytics is a feature that provides insights into the usage and activity of file data stored on Nutanix Files. File Analytics consists of a File Analytics VM (FAVM) that runs on a Nutanix cluster and communicates with the File Server VMs (FSVMs) that host the file shares. The FAVM collects metadata and statistics from the FSVMs and displays them in a graphical user interface (GUI). The FAVM must be deployed on the same network as the FSVMs, which is the Client-side network. This network is used for communication between File Analytics and FSVMs, as well as for accessing the File Analytics UI from a web browser. The Client-side network must have DHCP enabled and must be routable from the external hosts that access the file shares and File Analytics UI. Reference: Nutanix Files Administration Guide, page 93; Nutanix File Analytics Deployment Guide
NEW QUESTION # 57
An administrator has deployed a new Files cluster within a Windows Environment.
After some days, he Files environment is not able to synchronize users with the Active Directory server anymore. The administrator observes a large time difference between the Files environment and the Active Directory Server that is responsible for the behavior.
How should the administrator prevent the Files environment and the AD Server from having such a time difference in future?
- A. Use 0.pool.ntp.org as the NTP Server for the AD Server.
- B. Use the same NTP Servers for the File environment and the AD Server.
- C. Connect to every FSVM and edit the time manually.
- D. Use 0.pool.ntp.org as the NTP Server for the Files environment.
Answer: B
Explanation:
The administrator should prevent the Files environment and the AD Server from having such a time difference in future by using the same NTP Servers for the File environment and the AD Server. NTP (Network Time Protocol) is a protocol that synchronizes the clocks of devices on a network with a reliable time source. NTP Servers are devices that provide accurate time information to other devices on a network. By using the same NTP Servers for the File environment and the AD Server, the administrator can ensure that they have consistent and accurate time settings and avoid any synchronization issues or errors. Reference: Nutanix Files Administration Guide, page 32; Nutanix Files Troubleshooting Guide
NEW QUESTION # 58
An administrator needs to allow individual users to restore files and folders hosted in Files.
How can the administrator meet this requirement?
- A. Enable Self-Service Restore on shares/exports.
- B. Configure a Protection Domain on the FSVMs.
- C. Enable Self-Service Restore on the FSVMs.
- D. Configure a Protection Domain for the shares/exports.
Answer: A
Explanation:
Self-Service Restore (SSR) is a feature that allows individual users to restore files and folders hosted in Files without requiring administrator intervention. SSR can be enabled on a per-share or per-export basis, and users can access the snapshots of their data through a web portal or a Windows client application1. Reference: Nutanix Files Administration Guide1
NEW QUESTION # 59
What is a prerequisite for deploying Smart DR?
- A. Open TCP port 7515 on all client network IPs (uni-directionally on the source and recovery file servers).
- B. Requires one-to-many shares.
- C. The Files Manager must have at least three file servers.
- D. The primary and recovery file servers must have the same domain name.
Answer: A
Explanation:
Smart DR is a feature that allows share-level replication between active file server instances for disaster recovery. To configure Smart DR, one of the prerequisites is to open TCP port 7515 on all client network IPs (uni-directionally on the source and recovery file servers). This port is used for communication between the FSVMs and the replication engine. Reference: Nutanix Files Administration Guide, page 79; Nutanix Files Solution Guide, page 9
NEW QUESTION # 60
......
Free NCP-US-6.5 Exam Braindumps Nutanix Pratice Exam: https://www.fast2test.com/NCP-US-6.5-premium-file.html
Practice Test for NCP-US-6.5 Certification Real 2024 Mock Exam: https://drive.google.com/open?id=1ATCKS4IpPOsdPHdjnoWu0pd_cSr-WQJO