[Jan 15, 2024] Fast2test C-IBP-2302 dumps & SAP Certified Application Associate sure practice dumps
SAP C-IBP-2302 Actual Questions and Braindumps
NEW QUESTION # 42
You need to create time periods for the time profile in a planning area.What should you be aware of when running the Create Time Periods application job?
- A. The assigned Planning Area must be active.
- B. A time profile has to be activated so that the application job can proceed.
- C. This application job can be run for multiple time profiles at once.
- D. In the Parameter Section of the application job, choose the Time Profile ID and Planning Area.
Answer: D
NEW QUESTION # 43
Time profiles are made out of levels, and levels are made out of periods.Which ways can SAP IBP identify profiles and periods?Note: There are 2 correct answers to this question.
- A. Both periods and profiles have start and end dates.
- B. Both periods and profiles are identified by a unique integer.
- C. Periods are identified by an alphanumeric prefix and profiles by an integer.
- D. Periods are identified by an integer and profiles by an alphanumeric prefix.
Answer: C,D
NEW QUESTION # 44
Using the import/export functionality means working with groups of items that are organized into collections.What is the best practice for managing collections?
- A. A planning area with the copy operators assigned must be bundled in one collection.
- B. Configuration items should be bundled in the collections based on the SAP IBP project stream.
- C. A planning area with its time profile must be bundled in one collection.
- D. You should delete collections after they have been transported.
Answer: A,C
NEW QUESTION # 45
Which features apply to quota violations modeled with the optimizer?
- A. Quotas can be modeled for sourcing location, production, and consensus demand.
- B. Min and Max Quotas have to be the same as sourcing ratios.
- C. Because quota violations shouldn't be possible, the non-delivery cost rate is less than quota violation cost.
- D. The optimizer will only violate quotas if quotas are maintained as time-dependent key figures.
Answer: C
NEW QUESTION # 46
You want to display and edit data in different Units of Measure (UOM).Which of the following must you consider before you use the UOM?Note: There are 3 correct answers to this question.
- A. Units of measure are usually not time-dependent.
- B. Analytics provide the user with the option to select the target unit of measure.
- C. Unit of measure is an attribute of a master data type, such as Product.
- D. Units of measure are usually not time-independent.
- E. Conversion to the target unit of measure is handled by SAP IBP Excel UI
Answer: A,B,C
NEW QUESTION # 47
What does ABC/XYZ segmentation allow you to do?Note: There are 2 correct answers to this question.
- A. Substitute missing values in case of sporadic demands.
- B. Identify inventory items that require closer attention.
- C. Choose time-independent key figures as segmentation measures.
- D. Use forecasting algorithms that are specific to seasonal demands of SKUs in the segment "B".
Answer: B,C
NEW QUESTION # 48
Which conditions have to be fulfilled as a prerequisite to maintain a key figure disaggregation?Note: There are 2 correct answers to this question.
- A. The key figure is calculated and system editable.
- B. The key figure is calculated and all editable.
- C. The key figure is stored and system editable.
- D. The key figure is stored and all editable.
Answer: D
NEW QUESTION # 49
You set up time-series integration using Cloud Integration for Data Services. During the integration process of master data, an error occurred. In the Data Integration app the job failed with status "Fatal Error". How can you find more details about the error?
- A. Navigate to the Master Data Workbook in Excel and open the Log.
- B. Navigate to the Manage Master Data app and open the Log.
- C. Download the Initial Problem Report in the Data Integration app.
- D. Download the Rejection Report in the Data Integration app.
Answer: B
NEW QUESTION # 50
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?
- A. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.
- B. Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.
- C. Merge analytics and alerts into a new planning area from any sample planning area.
- D. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.
Answer: B
NEW QUESTION # 51
You have set up a planning area, and data is now available. You adjust the necessary time profile settings and run a consistency check.Which settings can you change and still run a successful consistency check?Note: There are 2 correct answers to this question.
- A. Change the past and future horizon of the levels in the time profile.
- B. Change the numbering hierarchy of the period IDs in the time profile.
- C. Add a new time profile level to the time profile.
- D. Change the description of the attributes in the time profile.
Answer: A,D
NEW QUESTION # 52
You define fixing for a key figure.Which of the following functions are available for this key figure? Note: There are 2 correct answers to this question.
- A. Fixing is possible for system editable key figures.
- B. Fixing is possible for manually editable key figures.
- C. Fixing is possible for a certain quantity of a key figure value.
- D. Fixing is possible for a certain period, including all child values in the hierarchy.
Answer: A,D
NEW QUESTION # 53
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level.Which of the following configuration options are possible for this process?Note: There are 2 correct answers to this question.
- A. Splitting the values from aggregated to detailed level using multiplication by the proportions
- B. Splitting the values from aggregated to detailed level, based on a stored split-factor key figure
- C. Splitting the values from aggregated to detailed level, based on the time profile attribute
- D. Splitting the values from detailed to aggregated level by using a copy operator
Answer: A,B
NEW QUESTION # 54
How can the SAP IBP scenario modeling functionality support business users in the S&OP planning cycle?Note: There are 2 correct answers to this question.
- A. Simulate demand sensing inputs for Supply Review
- B. Simulate heuristics run in Supply Review stage
- C. Simulate statistical forecast at the Demand Review stage
- D. Model inventory turns based on Target Safety stocks
Answer: B,C
NEW QUESTION # 55
What are the relevant use cases for helper key figures?Note: There are 2 correct answers to this questions.
- A. Used at any level of calculation level except the Request Level
- B. Used when you have more than three inputs at different planning levels in one calculation
- C. Used by end-users in planning views to help visualize cross-period calculations
- D. Used to break down a large calculation into manageable subcalculations
Answer: B,D
NEW QUESTION # 56
You create a planning filter using an SAP IBP Fiori app.Which of the following objects can it be applied to?Note: There are 2 correct answers to this question.
- A. Supply chain graph in Supply Chain Network app
- B. Jobs in the Applications Jobs app
- C. Snapshot operator in the SAP IBP add-in for Microsoft Excel
- D. Planning view templates in the SAP IBP add-in for Microsoft Excel
Answer: B,D
NEW QUESTION # 57
You are working to realign the data due to a recent warehouse closure.What should you be aware of in regards to the realignment steps settings?Note: There are 2 correct answers to this question.
- A. The name of the realignment step should be no longer than 20 characters.
- B. A realignment step can change master data, planning objects and key figures.
- C. The number of steps in the realignment run is limited to 255.
- D. You must mark the realignment step as "shared" and assign the steps to users.
Answer: B,D
NEW QUESTION # 58
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing.Which of the following parameters can you model to plan production with extra shift(s)?
- A. Capacity expansion with additional costs
- B. Production source validity at the start of seasonal peak
- C. Adjusted production interactive values
- D. Incremental production values
Answer: A
NEW QUESTION # 59
Which of the following are valid use cases for using the Realignment App?Note: There are 2 correct answers to this question.
- A. Removing outliers from the sales history of a reference product before transferring its sales to a new product
- B. Using the realignment run to identify obsolete data
- C. Changing customer sources and reassigning customers to new DCs
- D. Merging two locations into a new location
Answer: C,D
NEW QUESTION # 60
You are modeling a new product introduction.Which of the following steps can be part of your modeling process in the Manage Product Lifecycle app?Note: There are 2 correct answers to this question.
- A. Copy the launch dimension from the reference product to the new product
- B. Enter the Phase-out Start Date and Phase-out End Date
- C. Enter the product family to which the new product belongs
- D. Create planning objects for new combinations in the app
Answer: A,D
NEW QUESTION # 61
Which of the following are functions of SAP IBP for demand?Note: There are 2 correct answers to this question.
- A. Demand sensing of demand data using predictive analytics tools
- B. Embedded, on-the-fly demand analytics
- C. Consideration of demand-driven analysis for buffer positioning.
- D. Detailed statistical analysis of demand data using predictive analytics tools
Answer: B,D
NEW QUESTION # 62
What are the outputs of the Calculate Target Inventory Components Operator?Note: There are 3 correct answers to this question.
- A. Component Usage
- B. Reorder Point
- C. Recommended Safety Stock
- D. Target Pipeline Stock
- E. Target Cycle Stock
Answer: C,D,E
NEW QUESTION # 63
You are implementing SAP IBP to plan for a supply chain that experiences high seasonality.What supply planning operators can be used in your model to plan stock pre-builds?
- A. Supply optimizer and supply heuristics
- B. Finite and infinite heuristics
- C. Finite heuristics only
- D. Supply optimizer only
Answer: A
NEW QUESTION # 64
Which of the following conditions are relevant for subtotals in the planning view?Note: There are 2 correct answers to this question.
- A. The values of the attribute-based total at the highest attribute level in the planning level can be changed.
- B. The total value can be added before or after the selected attribute.
- C. Only attribute-based totals can be added to the planning view.
- D. The total number of attributes that can use subtotals in the planning view can be restricted.
Answer: B,D
NEW QUESTION # 65
What are the ways to achieve rolling aggregation with SAP IBP?
- A. Using a appropriate period weight factor
- B. Using a local member
- C. Using a key figure calculation
- D. Using a attribute as a key figure
Answer: A
NEW QUESTION # 66
......
SAP C_IBP_2302 certification is an excellent way for professionals to demonstrate their expertise in the implementation and management of SAP IBP for Supply Chain. Certified Application Associate - SAP IBP for Supply Chain (2302) certification can help individuals stand out in the job market and increase their chances of being hired by top organizations. Moreover, certified professionals are likely to earn higher salaries and have better career advancement opportunities.
Latest C-IBP-2302 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://www.fast2test.com/C-IBP-2302-premium-file.html
Pass C-IBP-2302 Exam with Updated C-IBP-2302 Exam Dumps PDF 2024: https://drive.google.com/open?id=17CA_T0VeeILgnalJxedtRhK19X_SOWaR