Latest NS0-162 exam dumps with real Network Appliance questions and answers
NS0-162 Exam in First Attempt Guaranteed
Network Appliance NS0-162 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
NEW QUESTION 28
You want to configure Active Directory domain controller access for NetApp ONTAP cluster administration. In this scenario, which two actions would accomplish this task? (Choose two.)
- A. Configure an authentication tunnel through an existing CIFS SVM.
- B. Configure an authentication tunnel through an admin SVM.
- C. Use the vservar active-directory create command to create a computer account on the domain for a non-CIFS SVM.
- D. Use the vserver active-directory create command to create a computer account on the domain for a CIFS SVM.
Answer: A,B
NEW QUESTION 29
Click the Exhibit button.
You are the administrator of your company's ONTAP 9.7 storage system. You try to connect your vSphere hosts to a newly created NFS datastore and receive the error message shown in the exhibit.
What must you do to solve this problem?
- A. Change the volume security style to UNIX.
- B. Activate all NFS protocol versions in your SVM.
- C. Set the MTU size for the data LIF to 9000.
- D. Add the vSphere host's IP addresses to an export policy rule.
Answer: A
NEW QUESTION 30
You want to prepare your ONTAP cluster and your ESXI cluster to connect NFS datastores over a 10-GbE network using Jumbo frames. In this scenario, which three configurations would accomplish this task?
(Choose three.)
- A. Enable jumbo frames with an MTU of 9216 for your switches.
- B. Enable Jumbo frames with an MTU of 9000 for your ONTAP cluster.
- C. Enable Jumbo frames with an MTU of 1500 for your ESXI hosts.
- D. Enable Jumbo frames with an MTU of 1500 for your ONTAP cluster.
- E. Enable jumbo frames with an MTU of 9000 for your ESXi hosts.
Answer: A,B,E
NEW QUESTION 31
Your company has recently decided to stop using the Fibre Channel Protocol (FCP) in the data center.
You are asked to decommission FCP and reuse any UTA2 ports to 10 GbE.
Which two steps are involved in this task? (Choose two.)
- A. Reboot the nodes.
- B. Remove the FCP license from all nodes in the cluster.
- C. Destroy any FC LIFs hosted on UTA2 ports.
- D. License additional ports for 10 GbE connectivity.
Answer: A,C
NEW QUESTION 32
An application owner at your organization requests a solution for zero RTO In the event of a failure In your primary data center, where you are using NetApp ONTAP 9.8 software with ISCSI LUNs. The owner wants to avoid reconfiguring the application.
Which NetApp solution would you propose to fulfill these requirements?
- A. SyncMlrror
- B. SnapMirror Business Continuity (SM-BC)
- C. SnapMirror Synchronous (SMS)
- D. SVM Disaster Recovery (SVM DR)
Answer: C
NEW QUESTION 33
You are asked to create a new SVM to serve SMB data using Active Directory authentication.
Which two requirements must be satisfied prior to serving data? (Choose two.)
- A. An intercluster LIF must be created for serving SMB data.
- B. DNS must be enabled and configured correctly.
- C. An administrative user must be created for the SMB SVM.
- D. The CIFS license must be installed on the storage system.
Answer: B,D
NEW QUESTION 34
You want to create a new SVM for serving NFS data using the Storage Virtual Machine (SVM) Setup wizard.
In this scenario, which object is created automatically during the setup process?
- A. a data volume named after the SVM with the suffix_nfs_vol1
- B. an export policy named after the SVM with the suffix_nfs_exp1
- C. a data LIF named after the SVM with the suffix_nfs_lif
- D. a data aggregate named after the SVM with the suffix_nfs_aggr1
Answer: C
NEW QUESTION 35
Exhibit.
You have received an alert from Active IQ Unified Manager that interface eOc has gone offline. Network engineering asks for the corresponding MAC address for the port that has a problem.
Referring to the exhibit, which MAC address would you supply to the engineering team?
- A. 00:a0:98:fl:2e:b2
- B. 02:a0:98:fl:2e:be
- C. 00:a0:98:fl:2e:b3
- D. 02:a0:98:fl:21:88
Answer: C
NEW QUESTION 36
Which two statements are true about NVMe? (Choose two.)
- A. NQNs are added to subsystems.
- B. LUNs are mapped to Initiator groups.
- C. Namespaces are mapped to subsystems.
- D. NQNs are added to namespaces.
Answer: A,C
Explanation:
Reference:
Add the host NQN to the subsystem: vserver nvme subsystem host add -vserver SVM_name -subsystem Subsystem_name -host-nqn Host_NQN:subsystem.Subsystem_name Map the namespace to the subsystem: vserver nvme subsystem map add -vserver SVM_name -subsystem subsystem_name -path path
NEW QUESTION 37
On FAS systems, FlexCache volumes are typically used for which type of workload?
- A. write-intensive SAN workloads
- B. read-intensive SAN workloads
- C. read-intensive NAS workloads
- D. write-intensive NAS workloads
Answer: C
NEW QUESTION 38
Exhibit.
Miss-----------------
The availability of the remote cluster in the peering relationship shows "Partial." Referring to the exhibit, what is the reason for this status message?
- A. The local cluster is unable to authenticate successfully to the remote cluster.
- B. The Intercluster LIFs on the local cluster are unavailable and not able to communicate to the remote cluster.
- C. The remote cluster does not have its cluster license applied properly.
- D. Some nodes In the local cluster are not able to contact some or all nodes in the remote cluster.
Answer: D
Explanation:
Some nodes in the local cluster are not able to contact some or all nodes in the remote cluster.
Partial - The peer cluster availability status will be Partial only if some nodes in the local cluster are not able to contact some or all nodes in the peer cluster. https://docs.netapp.com/ontap-9/topic/com.netapp.doc.dot-cm-cmpr-991/cluster__peer__show.html?cp=5_1_10_18_5
NEW QUESTION 39
You have an Internet of Things (IoT) application that will use SMB shares on a remote ONTAP Select Instance. There are no name services and only a local network Is available at the remote IoT site.
In this scenario, which two features are supported by ONTAP software for the IoT application? (Choose two.)
- A. Active Directory users
- B. SMB Server in workgroup mode
- C. CIFS local users
- D. SMB3 Witness protocol
Answer: B,C
Explanation:
https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/Is_Workgroup_Mode_Supported_for_CIFS_or_SMB_in_ONTAP
NEW QUESTION 40
Exhibit
You have a 2-node FAS8300 switchless cluster. You ran the performance capacity report to see the last hour of performance
Referring to the exhibit, which two statements describe the performance? (Choose two.)
- A. The CPU has been over utilized.
- B. A storage failover event will have no performance degradation.
- C. The CPU has been underutilized.
- D. A storage failover event will cause performance issues.
Answer: A,D
NEW QUESTION 41
A user wants existing data in a FlexVol created in ONTAP 9.1 to be placed into a FlexGroup volume with ONTAP 9.8. In this scenario, which two statements are true? (Choose two.)
- A. Use SnapMirror to replicate data from FlexVol to FlexGroup.
- B. A FlexVol to FlexGroup conversion is not supported.
- C. Use XCP to copy data from a FlexVol to a FlexGroup.
- D. You can convert the FlexVol volume to a FlexGroup volume.
Answer: A,D
Explanation:
Starting with ONTAP 9.7, you can perform an in-place conversion of a FlexVol volume to a FlexGroup volume without requiring a data copy or additional disk space. Starting with ONTAP 9.7, you can convert standalone FlexVol volumes or FlexVol volumes that are in a SnapMirror relationship to FlexGroup volumes.
NEW QUESTION 42
Your company runs a NetApp AFF A220 cluster as a file server for NFS and SMB. You want to use one of the unused ports to connect a single Windows host directly, using FC. You have converted the UTA2 ports e0e and e0f to FC and equipped them with a 16-Gbps FC transceiver. Your Windows host fails to connect to the storage.
In this scenario, which action solves the problem?
- A. Use an FC switch between storage and host.
- B. Use an Ethernet switch between storage and host.
- C. Use the arbitrated loop topology on storage and host.
- D. Use the point-to-point topology on all ports.
Answer: C
NEW QUESTION 43
You need to Increase the number of files that can be created In a volume. Which two methods enable you to achieve this goal? (Choose two.)
- A. Set the space guarantee to 'volume".
- B. Increase the number of files permitted on the volume.
- C. Set the fractional reserve to "0".
- D. Increase the size of the volume.
Answer: A,D
NEW QUESTION 44
Click the Exhibit button.
You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN. The network administrator has configured the switch port as an access(untagged) port on VLAN 1 and says that the VLAN is non-routed.
Referring to the exhibit, what would you do to troubleshoot this problem?
- A. Reconfigure the LIF to be on port e0c.
- B. Verify that the network cabling is working properly.
- C. Add a default gateway.
- D. Verify that there is no IP address conflict on the network.
Answer: A
NEW QUESTION 45
Exhibit.
You are adding a NetApp AFF A400 system to an existing 4-node cluster and want to know which ports you would use to expand your cluster.
Referring to the exhibit, which tool would you use to accomplish this task?
- A. NetApp Hardware Universe (HWU)
- B. Active 1Q Unified Manager
- C. NetApp Interoperability Matrix (IMT)
- D. Active IQ Conflg Advisor
Answer: A
NEW QUESTION 46
What are three firewall policies? (Choose three.)
- A. cluster
- B. node
- C. data
- D. intercluster
- E. mgmt
Answer: C,D,E
NEW QUESTION 47
Exhibit
You have a 4-node ONTAP cluster and use FCP to access several LUNs. You perform a volume move to move a LUN (/vol/sql01_sysdb/lun) from node na01-01 to na01-03. After the move, you perform an HBA rescan from the host, but ALUA Is now seeing twice the number of paths to the LUN.
Referring to the exhibit, which action would solve the problem?
- A. Ensure that the fabric zoning is correct.
- B. Reboot the host.
- C. Update the Selective LUN Map configuration for the LUN mapping.
- D. Change the MPIO policy on the host.
Answer: C
NEW QUESTION 48
You have created a new FlexCache cache volume and want to warm the cache before clients access the cache volume for the first time. In this scenario, how would you accomplish this task?
- A. Copy the data from the origin volume to the cache volume with the NetApp XCP Migration Tool.
- B. Prepopulate the cache volume with data from the origin volume using the flexcache prepopulate start command.
- C. Synchronize the origin and cache first with the volume flexcache sync-properties command.
- D. Enable block-level Invalidation using the volume flexcache origin config modify command.
Answer: B
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-fc-mgmt%2FGUID-E878AB6F-2A64-4E66-B865-6C11A0962AA9.html
NEW QUESTION 49
Which configuration Is supported using NetApp's All SAN Array (ASA)?
- A. 24-node cluster
- B. single node cluster
- C. 2-node cluster
- D. 12-node cluster
Answer: C
NEW QUESTION 50
You have a 50 TO FlexGroup volume that is serving NFSv3 on a FAS8300 HA pair that Is running ONTAP 9.8 software of files. A Linux du command runs for days to count files.
In this scenario, which native ONTAP feature will report real-time file counts?
- A. volume autosize
- B. File System Analytics
- C. Quality of Service
- D. Logical Space Reporting
Answer: A
NEW QUESTION 51
You are the administrator of your company's ONTAP 9.7 systems. You have an AFF A220 in your main data center and a FAS2720 at a second data center on the same campus. You must ensure the highest possible rate of data security and availability with all snapshots.
In this scenario, which ONTAP solution do you implement?
- A. a SnapMirror relationship with an update interval of one minute
- B. an SVM-DR relationship with identity preserve disabled for your SVMs
- C. a SnapMirror Synchronous relationship between AFF and FAS
- D. an SVM-DR relationship with identity preserve enabled for your SVMS
Answer: D
NEW QUESTION 52
......
NetApp NS0-162 Exam Certification Details:
| Recommended Training | ONTAP Cluster Fundamentals (WBT) ONTAP Cluster Administration (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Exam Name | Data Administrator ONTAP |
| Duration | 90 minutes |
| Sample Questions | NetApp NS0-162 Sample Questions |
Exam Sure Pass Network Appliance Certification with NS0-162 exam questions: https://www.fast2test.com/NS0-162-premium-file.html
Download Real NS0-162 Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=1B0TZAlwcVgnVGmTrEuoaHtPL8MHPIIuD