[Mar-2024] Pass F5 201 Exam in First Attempt Guaranteed!
Full 201 Practice Test and 255 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 94
Assume a virtual
server
has a ServerSSL
profile.
What
SSL certificates are required on the BIGIP.
- A. The BIGElIP's SSL certificates must be created within the company hosting the BIGElIPs.
- B. No SSL certificates are required on the BIGElIP.
- C. The BIGElIP's SSL certificates must be issued from a certificate authority.
- D. The BIGElIP's SSL certificates must only exist.
Answer: B
NEW QUESTION # 95
Some users who connect to a busy Virtual Server have connections reset by the BIG-IP system. Pool member resources are NOT a factor in this behavior. What is a possible cause for this behavior?
- A. The Rewrite Profile has NOT been configured.
- B. The server SSL Profile has NOT been reconfigured.
- C. The Connection Limit is set too low.
- D. The Connection Rate Limit is set too high
Answer: C
Explanation:
The topic explains that the connection reset behavior is caused by the vs configuration rather than the server resource problem. The answers B C are all configuration at the service forwarding level. If there is a problem with the configuration, it is all a problem rather than some users. Answer C's Connection Limit will cause a reset behavior when the connection reaches the threshold.
NEW QUESTION # 96
Refer to the exhibit.
A BIG-IP Administrator needs to fall over the active device. The administrator logs into the Configuration Unity and navigates to Device Management > Traffic Group. However, Force to Standby is greyed out What is causing this issue?
- A. The BIG-IP Administrator is logged in as administrator
- B. The BIG-IP Administrator is logged in as root
- C. The BIG-IP Administrator is on the Standby Device
- D. The BIG-IP Administrator is NOT logged into command line to tail over
Answer: C
NEW QUESTION # 97
A BIG-IP Administrator receives an RMA replacement for a failed F5 device. The BIG-IP Administrator tries to restore a UCS taken from the previous device, but the restore fails. The following error appears inthe/var/log/itm.
mcpd [****J: ******>;0; License is not operational (expired or digital signature does not match contents.) What should the BIG-IP Administrator do to avoid this error?
- A. Reactivate the license on the new device using the manual activation method
- B. Remove the license information from the UCS archive
- C. Revoke the license prior to restoring
- D. Use the appropriate tmsh command with the no-license option
Answer: D
NEW QUESTION # 98
The 8IG-IP Administrator generates a qkview using "qkview -SO" and needs to transfer the output file via SCP.
Which directory contains the output file?
- A. /var/local
- B. /var/config
- C. /var/tmp
- D. /var/log
Answer: C
NEW QUESTION # 99
Which three methods can be used for initial access to a BIGElIP system. (Choose three.)
- A. HTTP access to the management port
- B. HTTPS access to any of the switch ports
- C. HTTP access to any of the switch ports
- D. SSH access to any of the switch ports
- E. SSH access to the management port
- F. HTTPS access to the management port
- G. CLI access to the serial console port
Answer: E,F,G
NEW QUESTION # 100
As a part of the Setup Utility, the administrator sets the host name for the BEl IGP.
What would be the result if the two systems in a redundant pair were set to the
same host name.
- A. In a redundant pair, the two systems will always have the same host name. The parameter is synchronized between the systems.
- B. When the administrator attempts to access the configuration utility using the host name, they will always connect to the active system.
- C. The first
time
the systems
are synchronized
the receiving
system will be assigned the same selfElIP addresses as the source system. - D. Host names do not matter in redundant pair communication.
Answer: C
NEW QUESTION # 101
A BIG-IP device has only LTM and ASM modules provisioned. Both have nominal provisioning level. The BI6-IP Administrator wants to dedicate more resources to the LTM module. The ASM module must remain enabled. Which tmsh command should the BIG-IP Administrator execute to obtain the desired result?
- A. modify/sys provision asm level minimum
- B. modify /sys provision asm level none
- C. modify /sys provision Itm level minimum
- D. modify /sys provision Itm level dedicated
Answer: A
NEW QUESTION # 102
Assuming other failElover settings are at their default state, what would occur if the failElover cable were to be disconnected for five seconds and then reconnected.
- A. When the cable is disconnected, both systems will become active. When the voltage is restored, both systems will maintain active mode.
- B. As long as network communication is not lost, no change will occur.
- C. When the cable is disconnected, both systems will become active. When the voltage is restored, unit two will revert to standby mode.
- D. Nothing. FailElover due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
Answer: C
NEW QUESTION # 103
The BIG-IP Administrator needs to ensure the correct health monitor is being used lor a new HTTP pool named P_example.
Where should the BIG-IP Administrator validate these settings in the Configuration Utility?
- A. Local Traffic > Pools > P_ example
- B. Local Traffic > Nodes > Default Monitor
- C. Local Traffic > Monitors > http
- D. Local Traffic > Profiles > Services > HTTP > http
Answer: A
NEW QUESTION # 104
A BIG-IP Administrator is conducting maintenance on one BIG-IP appliance in an HA Pair. Why should the BIG-IP Administrator put the appliance into FORCED_OFFLINE state?
- A. To allow new connections to Virtual Servers and ensure the appliance becomes active
- B. To terminate connections to the management IP and decrease persistent connections
- C. To terminate existing connections to Virtual Servers and prevent the appliance from becoming active
- D. To preserve existing connections to Virtual Servers and reduce the CPU load
Answer: C
NEW QUESTION # 105
A BIG-IP Administrator needs to determine which pool members in a pool have been manually forced offline and are NOT accepting any new traffic. Which status icon indicates this?
A)
B)
C)
D)
- A. Option
- B. Option
- C. Option
- D. Option
Answer: A
NEW QUESTION # 106
A BIG-IP Administrator needs to collect HTTP status code and HTTP method for traffic flowing through a virtual server.
Which default profile provides this information?
- A. Request Adapt
- B. Statistics
- C. HTTP
- D. Analytics
Answer: C
NEW QUESTION # 107
Refer to the exhibit.
How are new connections load balanced?
- A. To the pool member with a high priority group value defined
- B. To the pool member with a low priority group value defined
- C. To the first two members listed with the same priority group
- D. To the pool member with the least number of connections
Answer: D
NEW QUESTION # 108
A BIG-IP Administrator discovers malicious brute-force attempts to access the BIG-IP device on the management interface via SSH. The BIG-IP Administrator needs to restrict SSH access to the management interface.
Where should this be accomplished?
- A. Network > Interfaces
- B. Network > Self IPs
- C. System > Configuration
- D. System > Platform
Answer: D
NEW QUESTION # 109
A BIG-IP Administrator remotely connects to the appliance via out-of-band management using https://mybigip mycompany net. The management portal has been working all week. When the administrator attempts to login today, the connection times out. Which two aspects should the administrator verify? (Choose two)
- A. The device is NOT redirecting them to http.
- B. Packet Filters on the device are blocking port 80.
- C. The administrator has the latest version of the web browser.
- D. DNS is property resolving the FQDN of the device.
- E. The administrator has TCP connectivity to the device.
Answer: D,E
NEW QUESTION # 110
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue?
- A. Set HTTP Profile to None
- B. Set Source Address to 10.1.1.2
- C. Set Destination Addresses/Mask to 0.0.0.0/0
- D. Set Protocol to UDP
Answer: A
NEW QUESTION # 111
The incoming client IP address is 195.64.45.52 and the last five connections have been sent to members A, C, E, D and B. Given the virtual server, pool, and persistence definitions and statistics shown in the above graphic, which member will be used for the next connection?
- A. 10.10.20.2:80
- B. 10.10.20.5:80
- C. 10.10.20.3:80
- D. 10.10.20.1:80
- E. It cannot be determined with the information given.
- F. 10.10.20.4:80
Answer: C
NEW QUESTION # 112
Assume the bigd daemon fails on the active system. Which three are possible results. (Choose three.)
- A. The active system will restart the bigd daemon and continue in active mode.
- B. The active system will restart the tmm daemon and continue in active mode.
- C. The active system will failElover and the standby system will go into active mode.
- D. The active system will reboot and the standby system will go into active mode.
- E. The active system will continue in active mode but gather member and node state information from the standby system.
Answer: A,C,D
NEW QUESTION # 113
The current status of a given pool member is unknown. Which condition could explain that state?
- A. The member has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
- B. The member has no monitor assigned to it.
- C. The member has a monitor assigned to it and the most recent monitor was successful.
- D. The member's node has a monitor assigned to it and the monitor did not succeed during the most recent timeout period.
Answer: B
NEW QUESTION # 114
You have created a custom profile named TEST2. The parent profile of TEST2 is named TEST1. If additional changes are made to TEST1, what is the effect on TEST2.
- A. Changes to TEST1 cannot affect TEST2 once TEST2 is saved.
- B. When TEST1 is changed, the administrator is prompted and can choose whether to propagate changes to TEST2.
- C. All changes to TEST1 are propagated to TEST2.
- D. Some of the changes to TEST1 may propagate to TEST2.
Answer: D
NEW QUESTION # 115
How is persistence configured?
- A. Persistence is a global setting; once enabled, loadbalancing choices are superceded by the persistence method that is specified.
- B. Persistence is a profile type; an appropriate profile is created and associated with virtual server.
- C. Persistence is an option for each pool member. When a pool is defined, each member's definition includes the option for persistence.
- D. Persistence is an option within each pool's definition.
Answer: B
NEW QUESTION # 116
A BIG-IP Administrator uses backend servers to host multiple services per server. There are multiple virtual servers and pools defined, referencing the same backend servers.
Which load balancing algorithm is most appropriate to have an equal number of connections on each backend server?
- A. Predictive (member)
- B. Predictive (node)
- C. Least Connections (node)
- D. Least Connections (member)
Answer: C
Explanation:
The same set of servers provides multiple services, that is, using different ports to provide different services at the same time. The stem requirement is based on server connection balancing, not server + port, so it is node.
NEW QUESTION # 117
Assuming other failover settings are at their default state, what would occur if the failover cable were to be disconnected for five seconds and then reconnected?
- A. When the cable is disconnected, both systems will become active. When the voltage is restored, both systems will maintain active mode.
- B. As long as network communication is not lost, no change will occur.
- C. When the cable is disconnected, both systems will become active. When the voltage is restored, unit two will revert to standby mode.
- D. Nothing. Failover due to loss of voltage will not occur if the voltage is lost for less than ten seconds.
Answer: C
NEW QUESTION # 118
Which three statements describe a characteristic of profiles? (Choose three.)
- A. While most virtual servers have at least one profile associated with them, it is not required.
- B. Default profiles cannot be created or deleted.
- C. All changes to parent profiles are propagated to their child profiles.
- D. A profile can be a child of one profile and a parent of another.
- E. Custom profiles are always based on a parent profile.
Answer: B,D,E
NEW QUESTION # 119
......
Prepare for your F5 certification with the updated Fast2test 201 exam questions: https://drive.google.com/open?id=1l_zTPe9q2O64VAa7W4yQM-xfP3j99qZB
Get Latest 201 Dumps Exam Questions in here: https://www.fast2test.com/201-premium-file.html