[Nov-2022] The Juniper JN0-250 Exam Test For Brief Preparation
Revolutionary Guide To Exam Juniper Dumps
NEW QUESTION 39
What is an 802.11 management frame transmitted by an AP?
- A. keepalive
- B. echo request
- C. ping
- D. beacon
Answer: D
NEW QUESTION 40
Which statement is correct about the Mist API?
- A. Only AP configurations are available from the API.
- B. Nothing seen in the GUI is available from the API.
- C. Only SLE configurations are available from the API.
- D. Everything seen in the GUI is available from the API.
Answer: A
NEW QUESTION 41
Which organization is responsible for WLAN standards?
- A. IEEE
- B. IETF
- C. FCC
- D. ISO
Answer: A
NEW QUESTION 42
Which site survey ensures that RF design requirements are satisfied?
- A. passive
- B. real time
- C. active
- D. spectrum
Answer: D
NEW QUESTION 43
Which organization is responsible for creating the 802.11 standard?
- A. Institute of Electrical and Electronics Engineers (IEEE)
- B. Ethernet Technology Consortium
- C. Wi-Fi Alliance
- D. International Organization for Standardization (ISO)
Answer: A
NEW QUESTION 44
What are three valid administrator roles that you would be able to assign to a user within an organization?
(Choose three.)
- A. Super User
- B. View
- C. Root User
- D. Helpdesk
- E. Network Admin
Answer: A,B,C
NEW QUESTION 45
You have discovered an access point that is not connected to the corporate network but it broadcasts the corporation's SSID.
In this scenario, what is this type of access point called?
- A. honeypot
- B. rogue
- C. neighbor
- D. air gap
Answer: C
NEW QUESTION 46
Which two 802.11 amendments operate within the 2.4 GHz band? (Choose two.)
- A. 802.11ac
- B. 802.11a
- C. 802.11b
- D. 802.11ax
Answer: C,D
NEW QUESTION 47
What would cause reduced Wi-Fi performance?
- A. using a single SSID
- B. using 40 MHz channels on 5 GHz
- C. using too many SSIDs
- D. using a PSK
Answer: C
NEW QUESTION 48
What is the base subscription required to get started with a Mist access point?
- A. Virtual Network Assistant
- B. Premium Analytics
- C. Wi-Fi Management and Assurance
- D. Mist Edge
Answer: C
NEW QUESTION 49
Users are complaining about WLAN performance and the Mist dashboard reports non-Wi-Fi interference.
Which diagnostics tool would you use to further investigate this issue on-site and determine the location of the interference?
- A. protocol analyzer
- B. spectrum analyzer
- C. wireless design software
- D. WLAN scanner
Answer: B
NEW QUESTION 50
What are two characteristics of the 2.4 GHz band when compared to the 5 GHz band? (Choose two.)
- A. lower frequency
- B. more congestion
- C. less non-Wi-Fi interference
- D. shorter wavelength
Answer: A,C
NEW QUESTION 51
When using the Mist Cloud with Mist APs, which statement is correct?
- A. User data is bridged locally.
- B. User data is terminated in the cloud and forwarded.
- C. User data is compressed and terminated in the cloud.
- D. User data is terminated in the cloud and run through a firewall.
Answer: A
NEW QUESTION 52
Which two statements about the Mist UI are true? (Choose two.)
- A. It can initiate a wired packet capture.
- B. It can initiate a wireless packet capture.
- C. It can initiate a BLE packet capture.
- D. It can initiate a packet capture on cloud uplink.
Answer: A,B
NEW QUESTION 53
Which statement is correct about the default configuration of a Mist AP?
- A. DHCP is enabled to retrieve IP information.
- B. No interface configuration is provided and an IP must be statically defined after booting.
- C. 192.168.0.1 is statically configured on the uplink port.
- D. VLAN tagging is enabled.
Answer: C
NEW QUESTION 54
Referring to the exhibit, what do you determine about the site's Time to Connect SLE metric?
- A. Eighty percent of the Time to Connect failures are related to DHCP failures
- B. Successful connect averaged 1.6 seconds.
- C. All clients cannot connect to the Internet.
- D. Time to Connect Association DHCP failures impacted 80% of users.
Answer: B
NEW QUESTION 55
A Mist access point is booting up, and will soon receive a channel assignment from the Mist Cloud. The channel assigned by the cloud is a DFS channel.
In this scenario, what must the AP do before broadcasting an SSID on the channel?
- A. Validate available non-DFS channels.
- B. Validate client device support.
- C. Transmit radar pulses for 60 seconds.
- D. Listen for radar.
Answer: D
NEW QUESTION 56
A user is experiencing DNS problems.
In this scenario, where in the GUI would you be able to see the problems?
- A. Clients tab
- B. Live View
- C. WLAN tab
- D. Insights
Answer: D
NEW QUESTION 57
When designing for a multiple frequency deployment (5 GHz and 2.4 GHz), which statement is correct?
- A. 5 GHz is a higher frequency and so will travel further and penetrate walls better.
- B. 802. 11ac is available in both frequency bands so the design frequency is not important.
- C. 5 GHz should generally be used for planning.
- D. The coverage of the multiple bands at the same power will be identical.
Answer: A
NEW QUESTION 58
What does RSSI measure?
- A. signal strength
- B. frequency
- C. noise
- D. interference
Answer: A
NEW QUESTION 59
Mist Radio Resource Management makes dynamic changes to which resource?
- A. channel
- B. BLE channel
- C. RF template
- D. channel width
Answer: A
NEW QUESTION 60
......
Exam Details Explained
The Juniper JN0-250 evaluation is sometimes known as the JNCIA-MistAI exam that confirms your mid-level mastery of Mist AI components and their configuration. Like many Juniper exams, this test is offered at Pearson VUE and brings a maximum of 65 questions in multiple-choice form. Usually, Juniper grades the exam-takers on a pass or fail basis, with the total exam length set at 90 minutes.
How to prepare for the Juniper JN0-250 Certification Exam:
There are various books, courses, and training available for the preparation of the Juniper JN0-250 exam. You should look for the ones which are prepared by the experts and provide you with the latest information regarding the Juniper Networks products. You can go through the study guides, watch YouTube free unlimited videos, learn from thousands of tutors on the internet, enroll in free courses available on the internet and use them for your preparation. Bootcamp and prep torrent are useful tools for the preparation of the Juniper JN0-250 exam.
The best way to prepare for this Juniper JN0-250 exam is to read the study material, like JN0-250 exam dumps thoroughly. It will help you to understand the concepts and also get to know the new technology that is being used in the market. Moreover, you should practice the questions regularly. In addition to this, you need to practice with the actual exam and try to solve real-world problems. You can go through the sample questions provided at the Pearson VUE website. Materials like watching a relevant video, learning from a VCE simulator, or dump, learning fundamental and advancement of exams from specialists will ensure your success in a very short period of time. These key methods will update your knowledge, but it demands time.
How to prepare for the Juniper JN0-250 Certification Exam
Best prepare guide for the Juniper JN0-250 Certification Exam
Tips to survive, if you do not have time to read all the pages of the syllabus
The JN0-250 certification exam for the Juniper Networks Associate examines your knowledge of the Juniper Networks Mist AI. This knowledge enables you to install and configure Juniper networks. In this article, we describe the JN0-250 certification exam in detail. We'll explain what you need to know for this certification, including test specifications, certification content, and how to prepare for the certification exam. JN0-250 exam dumps are provided to help you prepare for the JN0-250 exam. Here we will also inform you about the prep resources including this.
JN0-250 Free Study Guide! with New Questions: https://www.fast2test.com/JN0-250-premium-file.html