Online Questions - Valid Practice To your JN0-362 Exam (Updated 67 Questions)
Practice To JN0-362 - Remarkable Practice On your Service Provider Routing and Switching, Specialist (JNCIS-SP) Exam
NEW QUESTION 36
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.1.1.1 are less preferred than the default local preference
- B. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
- C. Routes from 10.3.3.3 are less preferred than the default local preference
- D. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1
Answer: D
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. The router will install the 0.0.0.0/0 route into the routing table when any BGP prefixes are present
- B. The router will install the 0.0.0.0/0 route into the routing table when no BGP prefixes are present
- C. The router will remove the 0.0.0.0/0 route from the routing table when any BGP prefixes are present
- D. The router will remove the 0.0.0.0/0 route from the routing table when no BGP prefixes are present
Answer: A,D
NEW QUESTION 38
Which three statements are true regarding the show system switchover operational mode command? (Choose three.)
- A. This command displays the status of the interface and process databases.
- B. This command can only be issued on the backup Routing Engine.
- C. This command displays the status of the kernel database.
- D. This command displays the status of graceful switchover.
- E. This command can only be issued on the master Routing Engine.
Answer: B,C,D
NEW QUESTION 39
Click the Exhibit.
By default, at which router will the implicit null (Label3) action take place for LSP shown in the exhibit?
- A. R2
- B. R3
- C. R4
- D. R1
Answer: B
NEW QUESTION 40
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the locally connected CE router's interface. The address of the interface is 192.168.1.1; the VPN routing-instance is named VPN-A.Which command will accomplish this task?
- A. ping VPN-A 192.168.1.1
- B. ping vpn-instance VPN-A 192.168.1.1
- C. ping instance VPN-A 192.168.1.1
- D. ping mpls l3vpn VPN-A 192.168.1.1
- E. ping routing-instance VPN-A 192.168.1.1
Answer: E
NEW QUESTION 41
What are two valid next-hop types that would be configured for a static route? (Choose two.)
- A. An IP address
- B. A MAC address
- C. An igress interface name
- D. An egress interface name
Answer: A,D
NEW QUESTION 42
Click the Exhibit.
Your router has an external peering session to 10.10.25.5 and several internal peers. However, routes learned from EBGP peers are showing up in a hidden state on IBGP peers.
Where would you apply the policy shown in the exhibit to solve this issue?
- A. Apply the next-hop-self as an export policy to the external BGP peers.
- B. Apply the next-hop-self as an import policy to the internal BGP peers.
- C. Apply the next-hop-self as an export policy to the internal BGP peers.
- D. Apply the next-hop-self as an import policy to the external BGP peers.
Answer: C
NEW QUESTION 43
You own a small company and need to assign IPv6 addresses to your routers. Because you want to follow the guidelines spelled out in RFC 3177, you want to design your network with the correct prefixes.Which prefix would your ISP likely allocate to your company?
- A. 47-bit prefix
- B. 128-bit prefix
- C. 48-bit prefix
- D. 64-bit prefix
Answer: C
NEW QUESTION 44
Which two high availability features preserve interface and kernel information during reconvergence? (Choose two.)
- A. graceful restart (GR)
- B. nonstop bridging (NSB)
- C. graceful Routing Engine switchover (GRES)
- D. nonstop active routing (NSR)
Answer: C,D
NEW QUESTION 45
Your customer would like to forward traffic using DLCI 600 and maintain Layer 2 information across a VPN.Which solution will meet these requirements?
- A. an IPsec VPN
- B. Virtual Private LAN Service (VPLS)
- C. a Layer 2 VPN
- D. a Layer 3 VPN
Answer: C
NEW QUESTION 46
You want to make use of the nonstop active routing (NSR) feature.
Which complementary feature must also be enabled?
- A. Virtual Router Redundancy Protocol
- B. graceful Routing Engine switchover
- C. graceful restart
- D. IP anycast
Answer: B
NEW QUESTION 47
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the multicast address
- B. the statically assigned address
- C. the loopback address
- D. the link-local address
Answer: D
NEW QUESTION 48
To prevent fragmentation issues across a GRE tunnel, which MTU value is recommended for the tunnel to accommodate most IP packets?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 49
Click the Exhibit.
You are using OSPF as your IGP in your network.
You have applied the OSPF configuration shown in the exhibit to router R1.
Which statement is true in this scenario?
- A. Router R1 will send a default route to router R2.
- B. Router R1 must be configured as a stub area for Area 0.0.0.0.
- C. Router R2 will not have a route to subnet 172.16.4.0/24.
- D. Router R3 will not have a route to subnet 172.16.3.0/24.
Answer: D
NEW QUESTION 50
Click the Exhibit button.
You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?
- A. export <policy name>
- B. type internal
- C. multipath
- D. type external
Answer: B
NEW QUESTION 51
Your customer complains that their Layer 3 VPN is not passing traffic from one site to another. You assigned that customer to VPN-A. Which command on the PE router will confirm the presence of customer routes?
- A. show route VPN-A table bgp.l2vpn.0
- B. show route VPN-A
- C. show route table VPN-A.inet.0
- D. show route table inet.3 VPN-A
Answer: C
NEW QUESTION 52
Click the Exhibit button.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. The BGP peerings between R1, R2, and R3 should use loopback interface addresses
- B. The BGP peerings between R1, R2, and R3 should use physical interface addresses
- C. The BGP peering between R1 and R4 should use loopback interface addresses
- D. The BGP peering between R1 and R4 should use physical interface addresses
Answer: A,D
NEW QUESTION 53
Click the Exhibit button.
Both configuration hierarchies shown in the exhibit have been committed to your MX Series device. Which two statements are true in this scenario? (Choose two.)
- A. Traffic destined to 10.3.0.1 will use the R1-to-R6 LSP as a next hop
- B. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 5
- C. Traffic destined to 10.3.0.1 will not use the R1-to-R6 LSP as a next hop
- D. The active 10.3.0.0/24 prefix installed in the route table will have a route preference of 7
Answer: A,D
NEW QUESTION 54
Which RSVP object allows LSRs to influence path selection?
- A. explicit route object
- B. hop object
- C. session object
- D. record route object
Answer: C
NEW QUESTION 55
Click the Exhibit button.
Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?
- A. The GRE header adds 20 bytes to the packet
- B. The GRE header adds 24 bytes to the packet
- C. The IP header adds 24 bytes to the packet
- D. The IP header adds 20 bytes to the packet
Answer: B
NEW QUESTION 56
An Ethernet bridge is configured such that all interfaces are in a single broadcast domain By default.
Which two tasks does the bridge perform in response to receiving a multicast frame? (Choose two)
- A. It learns the source MAC address
- B. It floods the frame out of particular interfaces based on its multicast MAC table
- C. It drops the frame
- D. It floods the frame out of all interfaces except the one on which it was received
Answer: A,D
NEW QUESTION 57
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)
- A. It creates and adds a new inner IP header with the remote destination device's IP address
- B. It modifies the source and destination addresses in the inner IP header
- C. It adds an outer IP header with the destination address of the remote tunnel endpoint
- D. It decrements the time-to-live (TTL) counter by one in the inner IP header
Answer: C,D
NEW QUESTION 58
......
True JN0-362 Exam Extraordinary Practice For the Exam: https://www.fast2test.com/JN0-362-premium-file.html