Pass NSE5_FAZ-6.2 Exam with Updated NSE5_FAZ-6.2 Exam Dumps PDF 2022
NSE5_FAZ-6.2 Exam Dumps - Free Demo & 365 Day Updates
NEW QUESTION 33
Which two purposes does the auto cache setting on reports serve? (Choose two.)
- A. It reduces report generation time.
- B. It reduces the log insert lag rate.
- C. It provides diagnostics on report generation time.
- D. It automatically updates the hcache when new logs arrive.
Answer: A,D
Explanation:
Reference:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/384416/how-auto-cache-works
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/86926/enabling-auto-cache
NEW QUESTION 34
What is the purpose of employing RAID with FortiAnalyzer?
- A. To separate analytical and archive data
- B. To back up your logs
- C. To introduce redundancy to your log data
- D. To provide data separation between ADOMs
Answer: C
NEW QUESTION 35
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?
- A. Log collection
- B. Real-time forwarding
- C. Host name resolution
- D. Log correlation
Answer: A
NEW QUESTION 36
View the exhibit.
What does the data point at 14:35 tell you?
- A. FortiAnalyzer has temporarily stopped receiving logs so older logs' can be indexed.
- B. FortiAnalyzer is indexing logs faster than logs are being received.
- C. FortiAnalyzer is dropping logs.
- D. The sqlplugind daemon is ahead in indexing by one log.
Answer: B
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/administration-guide/47690/insert-rate-vs-receive-rate-widget
NEW QUESTION 37
What can the CLI command # diagnose test application oftpd 3 help you to determine?
- A. What devices are registered and unregistered
- B. What ADOMs are enabled and configured
- C. What devices and IP addresses are connecting to FortiAnalyzer
- D. What logs, if any, are reaching FortiAnalyzer
Answer: C
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.5/cli-reference/395556/test#test_application
NEW QUESTION 38
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?
- A. Downgrade your RAID level, replace the disk, and then upgrade your RAID level
- B. Clear all RAID alarms and replace the disk while FortiAnalyzer is still running
- C. Shut down FortiAnalyzer and then replace the disk
- D. Perform a hot swap
Answer: D
NEW QUESTION 39
What is the main purpose of using an NTP server on FortiAnalyzer and all of its registered devices?
- A. Host name resolution
- B. Log collection
- C. Real-time forwarding
- D. Log correlation
Answer: C
NEW QUESTION 40
By default, what happens when a log file reaches its maximum file size?
- A. FortiAnalyzer rolls the active log by renaming the file.
- B. FortiAnalyzer stops logging.
- C. FortiAnalyzer overwrites the log files.
- D. FortiAnalyzer forwards logs to syslog.
Answer: A
NEW QUESTION 41
Which FortiAnalyzer feature allows you to retrieve the archived logs matching a specific timeframe from another FortiAnalyzer device?
- A. Log fetching
- B. Log forwarding an aggregation mode
- C. Log upload
- D. Indicators of Compromise
Answer: A
Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.2.0/administration-guide/651442/fetcher-management
NEW QUESTION 42
Which FortiGate process caches logs when FortiAnalyzer is not reachable?
- A. logfiled
- B. sqlplugind
- C. oftpd
- D. miglogd
Answer: D
Explanation:
Explanation/Reference: https://forum.fortinet.com/tm.aspx?m=143106
NEW QUESTION 43
What is the purpose of a predefined template on the FortiAnalyzer?
- A. It contains predefined data to generate mock reports
- B. It specifies the report layout which contains predefined texts, charts, and macros
- C. It can be edited and modified as required
- D. It specifies report settings which contains time period, device selection, and schedule
Answer: B
Explanation:
Reference:
2300_Reports/0010_Predefined_reports.htm#:~:text=FortiAnalyzer%20includes%20a%20number%
20of,create%20and%2For%20build%20reports.&text=A%20template%20populates%20the%20Layout,that%
20is%20to%20be%20created.
https://help.fortinet.com/fa/faz50hlp/56/5-6-2/FMG-FAZ/2300_Reports/0010_Predefined_reports.htm
NEW QUESTION 44
What purposes does the auto-cache setting on reports serve? (Choose two.)
- A. To reduce the log insert lag rate
- B. To reduce report generation time
- C. To provide diagnostics on report generation time
- D. To automatically update the hcache when new logs arrive
Answer: B,D
NEW QUESTION 45
FortiAnalyzer uses the Optimized Fabric Transfer Protocol (OFTP) over SSL for which purpose?
- A. To upload logs to an SFTP server
- B. To send an identical set of logs to a second logging server
- C. To encrypt log communication between devices
- D. To prevent log modification during backup
Answer: B
Explanation:
Explanation/Reference: https://docs.fortinet.com/document/fortigate/6.4.0/ports-and-protocols/109281/oftp-optimized- fabric-transfer-protocol#:~:text=The%20Optimized%20Fabric%20Transfer%20Protocol,and%2For%
20FortiManager)%20unit.
NEW QUESTION 46
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally?
(Choose two.)
- A. Output profile
- B. Mail server
- C. SFTP server
- D. Report scheduling
Answer: A,C
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/6d9f8fb5-6cf4-11e9-
81a4-00505692583a/FortiAnalyzer-6.0.5-Administration-Guide.pdf (119)
NEW QUESTION 47
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?
- A. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid
- B. FortiAnalyzer is functioning normally
- C. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
- D. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
Answer: C
Explanation:
Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/4cb0dce6-dbef-11e9-
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)
NEW QUESTION 48
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?
- A. Export to Report Chart
- B. Custom View
- C. Chart Builder
- D. Dataset Library
Answer: C
NEW QUESTION 49
Refer to the exhibit.
What does the data point at 14:55 tell you?
- A. The received rate is almost at its maximum for this device
- B. Raw logs are reaching FortiAnalyzer faster than they can be indexed
- C. Logs are being dropped
- D. The sqlplugind daemon is behind in log indexing by two logs
Answer: C
NEW QUESTION 50
What statements are true regarding FortiAnalyzer 's treatment of high availability (HA) dusters? (Choose two)
- A. FortiAnalyzer distinguishes different devices by their serial number.
- B. FortiAnalyzer receives bgs only from the primary device in the cluster.
- C. FortiAnalyzer receives logs from d devices in a duster.
- D. FortiAnalyzer only needs to know (he serial number of the primary device in the cluster-it automaticaly discovers the other devices.
Answer: A,C
NEW QUESTION 51
Why should you use an NTP server on FortiAnalyzer and all registered devices that log into FortiAnalyzer?
- A. To improve DNS response times
- B. To resolve host names
- C. To use real-time forwarding
- D. To properly correlate logs
Answer: D
Explanation:
NEW QUESTION 52
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate to FortiAnalyzer with any user account in a single LDAP group? (Choose two.)
- A. A local wildcard administrator account
- B. An administrator group
- C. A trusted host profile that restricts access to the LDAP group
- D. A remote LDAP server
Answer: A,D
Explanation:
Explanation/Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38567
NEW QUESTION 53
Which two statements about log forwarding are true? (Choose two.)
- A. You can use aggregation mode only with another FortiAnalyzer.
- B. The client retains a local copy of the logs after forwarding.
- C. Forwarded logs cannot be filtered to match specific criteria.
- D. Logs are forwarded in real-time only.
Answer: B,D
Explanation:
Explanation/Reference: www.fortinetguru.com/2020/07/log-forwarding-fortianalyzer-fortios-6-2-3/
NEW QUESTION 54
What is the purpose of the following CLI command?
- A. To add a log file checksum
- B. To add a unique tag to each log to prove that it came from this FortiAnalyzer
- C. To encrypt log communications
- D. To add the MD's hash value and authentication code
Answer: A
NEW QUESTION 55
......
NSE5_FAZ-6.2 Dumps - Pass Your Certification Exam: https://www.fast2test.com/NSE5_FAZ-6.2-premium-file.html