[Q34-Q56] PASS DES-6322 exam with EMC Real Exam Questions - 100% Valid!

Share

PASS DES-6322 exam with EMC Real Exam Questions - 100% Valid!

Actual DES-6322 Exam Recently Updated Questions with Free Demo

NEW QUESTION 34
A VxRail E560F model was delivered six months ago and is now scheduled to be installed with the target code. What is the correct order of steps to complete this task?

Answer:

Explanation:

 

NEW QUESTION 35
A VxRail implementation engineer is validating the network environment with NVT. The proposed switch configuration is shown in the exhibit. The ToR Switch information file is available.
Use the VxRail simulator to set up NVT for switch validation. Import the switch Information and tag the ports based on the exhibit.

Answer:

Explanation:

 

NEW QUESTION 36
A VxRail Test Plan has been completed What is the protocol for recording the results'?

  • A. In front of a customer, complete and document each test, test date, and a screenshot of results
  • B. In front of a customer, complete each test and document the test date
  • C. With the implementation team, complete and document each test, test date, and a screenshot of results
  • D. With the implementation team, complete each test and document the test date

Answer: C

 

NEW QUESTION 37
A customer has decided that they will be using the Spanning Tree protocol in their Dell EMC ToR switches How should the switch ports used for VxRail be configured to achieve a successful deployment?

  • A. Enable link aggregation for all ports
  • B. Set the port mode to access
  • C. Set the port type to edge
  • D. Enable MLD snooping and querier

Answer: B

 

NEW QUESTION 38
Which vSAN feature requires an All-Flash cluster?

  • A. Data-in-Transit Encryption
  • B. Storage Policy Based Management
  • C. Data-at-Rest Encryption
  • D. Erasure Coding

Answer: C

 

NEW QUESTION 39
Which requirement must be met when expanding a 3-node VxRail G560F cluster with a fourth G Series node in the same chassis?

  • A. New node must be at the same VxRail version as existing nodes
  • B. Node requires only the same drive configuration
  • C. PCIe network card must be added to all nodes
  • D. Node hardware must be identical to the other three nodes

Answer: D

Explanation:

 

NEW QUESTION 40
A systems engineer needs to check the health of the nodes and the system VMs to prevent complications or failures during VxRail upgrades. Which tool must be used to perform the task?

  • A. VxVerify
  • B. CloudlQ
  • C. VxRail ACE
  • D. SolVe Online

Answer: A

Explanation:

 

NEW QUESTION 41
The VxRail Deployment Wizard is being used on a VxRail cluster with a customer-supplied VDS. Which settings must be used to ensure successful installation?

  • A. Join an external vCenter Server
    Use the step-by-step method
  • B. Use the VxRail vCenter Server
    Upload a configuration file (JSON)
  • C. Use the VxRail vCenter Server
    Use the step-by-step method
  • D. Join an external vCenter Server
    Upload a configuration file (JSON)

Answer: C

 

NEW QUESTION 42
A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process. Where in the vSphere Client can they review alarms and overall vSAN health?

  • A. Triggered Alarms > All Issues > Issues and Alarms
    Triggered Alarms > vSAN > Health
  • B. Monitor > All Issues > Issues and Alarms
    Monitor > vSAN > Health
  • C. Monitor > Issues and Alarms > All issues
    Monitor > vSAN > Skyline Health
  • D. Triggered Alarms > Issues and Alarms > All issues
    Triggered Alarams > vSAN > Skyline Health

Answer: C

Explanation:

 

NEW QUESTION 43
According to Dell best practices, which VxRail series can be deployed in either datacenters or remote locations?

  • A. V Series
  • B. E Series
  • C. D Series
  • D. G Series

Answer: B

 

NEW QUESTION 44
What is validated by running the Proactive VM Creation test in vCenter on a VxRail cluster?

  • A. vSAN has sufficient storage capacity
  • B. Network performance is sufficient
  • C. Network firewalls are configured correctly
  • D. vSAN operates successfully

Answer: B

 

NEW QUESTION 45
An implementation engineer is tasked with setting up RecoverPoint for VMs on a single G Series chassis. How many VMs are licensed to be protected on the cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: A

 

NEW QUESTION 46
For which VxRail models must the iDRAC NIC Selection be set to Dedicated?

  • A. D, E, and G Series
  • B. D, G, P, S, and V Series
  • C. D, E, P, S, and V Series
  • D. E, P, S, and V Series only

Answer: A

 

NEW QUESTION 47
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?

  • A. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only
  • B. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster
  • C. Data-In-Transit Encryption: Addresses fear of media theft Data-At-Rest Encryption: Addresses fear of rogue administrators
  • D. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server

Answer: D

Explanation:

 

NEW QUESTION 48
Which vSAN feature requires an All-Flash cluster?

  • A. Data-in-Transit Encryption
  • B. Deduplication and compression
  • C. Storage Policy Based Management
  • D. Data-at-Rest Encryption

Answer: B

 

NEW QUESTION 49
An implementation engineer is configuring External SRS. Where can they find the installation files for SRS VE?

  • A. Dell Support Page
  • B. VxRail Support Matrix
  • C. VxRail Manager
  • D. SolVe Online

Answer: C

 

NEW QUESTION 50
According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE send to the customer?

  • A. VxRail QuickStart Guide
    VxRail Network Planning Guide
  • B. VxRail vCenter Server Planning Guide
    VxRail Network Planning Guide
  • C. VxRail vCenter Server Planning Guide
    Network Validation Tool
  • D. VxRail QuickStart Guide
    Network Validation Tool

Answer: D

 

NEW QUESTION 51
An implementation engineer is deploying a new VxRail cluster. What should they confirm before installing the hardware?

  • A. Service laptop must be on the same IP network as the iDRACs
  • B. Single power zone must be used with adequate power cables
  • C. At least 36 in (92 cm) clearance exists in front of and behind the cabinet
  • D. Power distribution must support the power rating of a single node

Answer: D

 

NEW QUESTION 52
Use the VxRail simulator to explore the system. What is the presented configuration?
Note: It fs necessary to close (x) the simulator window before you can select a response to this question.




  • A. Internal vCenter and Internal DNS
  • B. External vCenter and external DNS
  • C. Internal vCenter and external DNS
  • D. External vCenter and internal DNS

Answer: C

 

NEW QUESTION 53
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?

  • A. Shutdown of an entire cluster
  • B. Temporary maintenance
  • C. Permanent removal of host from cluster
  • D. Extensive maintenance

Answer: B

Explanation:

 

NEW QUESTION 54
Match each component of the VxRail HCI System Software to its description.

Answer:

Explanation:

 

NEW QUESTION 55
What are the requirements for a customer-supplied VDS in a VxRail deployment?

  • A. 4 or 8 uplinks
    Port groups for Discovery, Management, vMotion, and vSAN only
  • B. 2 or 4 uplinks
    Port groups for Discovery, Management, vMotion, and vSAN only
  • C. 2 or 4 uplinks
    Port groups for Discovery, Management vCenter Server, vMotion, and vSAN
  • D. 4 or 8 uplinks
    Port groups for Discovery, Management, vCenter Server, vMotion, and vSAN

Answer: C

Explanation:

 

NEW QUESTION 56
......


Dell EMC VxRail Specialist Exam Certification Details:

Duration90 mins
Passing Score63%
Number of Questions60
Exam Price$200 (USD)
Schedule ExamPearson VUE
Exam CodeDES-6322


A Step by Step Guide To The Best Ways To Prepare For DELL DES-6322 Certification

You May Know About DELL DES-6322 Certification

A Complete Description Of How To Pass DELL DES-6322 Certification

The DES-6322 is a Dell certification exam that covers Implementation Engineer skills surrounding the VxRail product. The following articles are some of the best articles to provide you with an overview on preparing for this exam. This article contains information about the Dell DES-6322 Certification Exam for Learning how to prepare for it. DES-6322 exam dumps are the newest exam preparation materials with updated DES-6322 samples, with which you can easily pass your Dell certification DES-6322 exam.


Practice with a practice test for passing the DELL DES-6322 Exam:

You can take a scenario-based practice test before you take the real Dell DES-6322 exam. This will help you get a feeling for what the real test will be like. DELL DES-6322 exam dumps can help you when it comes to studying for the actual exam. You will also find that many of the questions from your practice exams are included in the real exam. Record yourself answering these questions and then play them back. Inquiries you get from real students will also help you prepare for your exam and narrow your focus.

Candidates can perform purchasing of these braindumps from internet browsers like Firefox, chrome, and opera. Desktop, Android, IOS, and safari smartphones devices could also be used for studyexam. You can also use tablets or laptops for wide-screen views. Encryption is not required for taking the test. Braindumpsstore provides the best DELL DES-6322 braindumps for buy. Meet the test in a relaxed environment to avoid any unnecessary pressure.

 

DES-6322 Free Sample Questions to Practice One Year Update: https://www.fast2test.com/DES-6322-premium-file.html

Free EMC DES-6322 Exam Questions: https://drive.google.com/open?id=10CVm5NownTZJE9ddshZQXUDwEquBe3wC

Contact Us

If you have any question please leave me your email address, we will reply and send email to you in 12 hours.

Our Working Time: ( GMT 0:00-15:00 ) From Monday to Saturday

Support: Contact now 

日本語 Deutsch 繁体中文 한국어