2023 Updated 220-1101 PDF for the 220-1101 Tests Free Updated Today!
Fully Updated Dumps PDF - Latest 220-1101 Exam Questions and Answers
CompTIA 220-1101 certification exam is an essential certification for individuals looking to start a career in IT or advance their career in the IT industry. CompTIA A+ Certification Exam: Core 1 certification exam validates the candidate’s skills and knowledge in areas such as hardware, networking, mobile devices, cloud computing, and troubleshooting. With the right preparation and study resources, candidates can pass the exam and demonstrate their expertise in the latest technologies and best practices.
NEW QUESTION # 98
Which of the following concepts would be used by an online retailer to quickly add more web servers during peak sales times?
- A. Rapid elasticity
- B. Community cloud
- C. Metered service
- D. High availability
Answer: A
NEW QUESTION # 99
A company has a dot matrix printer that uses carbon paper. The company reports that the first page is printing too light, although the following pages are still legible. Which of the following MOST likely needs to be fixed?
- A. The print drum is worn and loose causing the printing to be light in places
- B. The fuser assembly is not calibrated properly, causing it to impact the paper too hard
- C. The wrong type of filement is loaded, preventing it from sticking correctly
- D. The heating element has failed, and a new one needs to be installed for proper transfer
- E. The ribbon is low on ink or missing and must be replaced to get proper output
Answer: D
NEW QUESTION # 100
Which of the following connectors can be plugged into a Thunderbolt 3 port on a laptop?
- A. USB-C
- B. USB-A
- C. microUS3
- D. miniUSB
Answer: B
Explanation:
Thunderbolt 3 is a USB-C port, so any device with a USB-C connector can be plugged into it. MiniUSB, microUSB and USB-A are not compatible with Thunderbolt 3.
NEW QUESTION # 101
Laura, a customer, has instructed you to configure her home office wireless access point.
She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.
Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.
She requests that the default settings be changed to the following.
Wireless Name: HomeWiFi
Shared Key: CompTIA
Router Password: Secure$1
Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.
Laptop: IP Address 192.168.1.100
Hardware Address: 00:0A:BF:03:C4:54
Smartphone: IP Address 192.168.1.101
Hardware Address: 09:2C:D0:22:3F:11
INSTRUCTIONS
Configure Laura's wireless network using the network adapter window.
If at any time you would like to bring back the initial state of the situation, please click the Reset All button.
Answer:
Explanation:
NEW QUESTION # 102
Recently, an organization received a number of spam emails that passed through the spam gateway. The emails contained generally the same information, but the sending domains were different. Which of the following solutions would BEST help mitigate the issue?
- A. Editing the sender policy framework
- B. Contacting the gateway vendor
- C. Verifying DMARC is enabled
- D. Updating the keyword filtering
Answer: C
Explanation:
Explanation
DMARC (Domain-based Message Authentication, Reporting and Conformance) is an email authentication protocol. It is designed to give email domain owners the ability to protect their domain from unauthorized use, commonly known as email spoofing.
NEW QUESTION # 103
A user in a medical office contacts a technician regarding a printer that is used to print A4-sized labels. After the labels are printed, they mistakenly contain white space in the middle of the page. Which of the following would MOST likely be the cause?
- A. Worn rollers
- B. Contaminated fuser
- C. A misfeed
- D. Page orientation
Answer: B
Explanation:
The most common symptoms that indicate fuser deterioration are: The print leaves parallel spots across a sheet. The printer begins to loosen toner and does not stick to the sheet. Stains on printed sheets. Annoying noise from gear wear. The fusers are the core in the printing process of a laser printer. The Fuser is the piece that fixes the toner on the paper.
NEW QUESTION # 104
Which of the following wireless technologies would a company most likely implement for inventory management?
- A. 5G
- B. RFD
- C. Bluetooth
- D. NFC
Answer: B
Explanation:
Explanation
RFD stands for Radio Frequency Identification, which is a technology that uses radio waves to identify and track objects that have RFID tags attached to them. RFID tags are small devices that store information and can be read by RFID readers without direct contact or line of sight. RFID can be used for inventory management, as it can provide real-time visibility and accuracy of the location, quantity, and status of the items in a warehouse, store, or supply chain .
NEW QUESTION # 105
A user is connecting to a network via a Bluetooth hot-spot. Which of the following best describes this type of network?
- A. PAN
- B. SAN
- C. WAN
- D. LAN
Answer: A
Explanation:
Explanation
The correct answer is D. PAN.
A PAN, or Personal Area Network, is a type of network that connects devices within a short range, usually less than 10 meters, and is used by an individual. A PAN can be wireless or wired, and it can enable data transmission between devices without requiring an internet connection. A PAN can also be connected to a LAN or a higher level network, where one device acts as a gateway.
A Bluetooth hotspot is an example of a wireless PAN, where a device such as a smartphone or a laptop can create a network with other Bluetooth-enabled devices nearby. A Bluetooth hotspot can allow devices to share files, access the internet, or use peripherals such as printers or speakers.
A SAN, or Storage Area Network, is a type of network that connects storage devices such as hard disks, tape drives, or optical drives to servers. A SAN provides high-speed data transfer and access to large amounts of data. A SAN is usually used in data centers or enterprises that need to store and manage huge volumes of data.
A WAN, or Wide Area Network, is a type of network that connects devices over a large geographical area, such as across cities, countries, or continents. A WAN can use different technologies and media to transmit data, such as fiber-optic cables, satellite links, or radio waves. A WAN can also consist of multiple LANs or other types of networks. The internet is the largest example of a WAN.
A LAN, or Local Area Network, is a type of network that connects devices within a limited area, such as within a building or a campus. A LAN can use wired or wireless technologies to transmit data, such as Ethernet cables, Wi-Fi routers, or switches. A LAN can enable devices to share resources, such as printers, scanners, or files.
For more information about the types of networks and their differences, you can refer to the following web search results: 11 Types of Networks: Understanding the Differences, Types of Computer Networks, Types of network - Introduction to networks.
NEW QUESTION # 106
A technician was called in to look at a user's PC. The user reported the PC was very sluggish. The HDD light on the PC was constantly on without blinking. The PC itself was slow receiving input and took a very long time to load the OS. The technician also noticed updates had failed. Which of the following is MOST likely the cause of these issues?
- A. A RAID disk failed.
- B. The HDD has no free space.
- C. The HDD cables need reseating.
- D. The hard disk drivers have been corrupted
Answer: B
Explanation:
If a user's PC is very sluggish, the HDD light on the PC is constantly on without blinking, the PC itself is slow receiving input, and it takes a very long time to load the OS, the HDD has no free space is most likely the cause of these issues. When the hard disk drive (HDD) has no free space, the computer may become slow and unresponsive. The technician should check the amount of free space on the HDD and delete any unnecessary files to free up space.
NEW QUESTION # 107
A user reports a cell phone is getting hot. Which of the following are MOST likely to be possible causes? (Select THREE).
- A. A failing battery
- B. Using the device as a Wi-Fi hotspot
- C. Less than 15% free storage space on the phone
- D. Privileged control
- E. A cracked screen
- F. Granting too many application camera permissions
- G. Recurring prompts to install OS updates
- H. Too many open applications
Answer: A,B,H
Explanation:
Using the device as a Wi-Fi hotspot, a failing battery, and too many open applications are the most likely causes of the cell phone getting hot. These actions require the phone to use more power and processing, causing it to heat up.
NEW QUESTION # 108
A technician is asked to purchase and install a line-of-sight wireless system that provides a stable network connection between two buildings. Which of the following needs to be considered prior to purchasing the system?
- A. IP address range
- B. Regulatory power limits
- C. SSID broadcast
- D. Firewall rules
Answer: B
Explanation:
Explanation
A line-of-sight wireless system is a type of wireless communication that requires a clear and unobstructed path between the transmitter and the receiver. This can be achieved by using directional antennas that focus the radio signals in a narrow beam. A line-of-sight wireless system can provide a stable network connection between two buildings that are within the range and visibility of each other.
However, before purchasing and installing a line-of-sight wireless system, one of the factors that needs to be considered is the regulatory power limits. The power limit is the maximum amount of radio frequency (RF) energy that a transmitter can emit. Different countries and regions have different regulations and standards for the allowable power levels of wireless devices. Exceeding the power limit can cause interference with other wireless services, such as aviation, radio, television, etc. It can also pose health and safety risks to humans and animals.
Therefore, a technician should check the local laws and regulations for the power limits of the wireless system before buying and installing it. The technician should also use a proper tool to measure the actual power output of the transmitter and adjust it accordingly. The technician should also ensure that the transmitter and receiver are aligned properly and have a clear line of sight without any obstacles.
The other options are not relevant to the line-of-sight wireless system. The IP address range is a set of numerical identifiers that are assigned to devices on a network. It does not affect the physical transmission of wireless signals. The SSID broadcast is a feature that allows a wireless network to announce its name and availability to nearby devices. It does not affect the stability of the network connection between two buildings.
The firewall rules are a set of policies that control the incoming and outgoing traffic on a network. They do not affect the line-of-sight wireless system.
References:
Wireless line-of-sight, non-line-of-sight, beyond-line-of-sight propagation Point-to-point Wi-Fi bridging between buildings-the cheap and easy way How Does Wireless Internet, or Line of Sight Internet Work?
Line-of-Sight Transmission - Engineering LibreTexts
What is Line of Sight (LoS)? - Definition from Techopedia
NEW QUESTION # 109
Which of the following BEST describes the main function of a web server?
- A. Hosting home pages and business portals
- B. Setting up personal mailboxes and calendars
- C. Storing files and controlling user access
- D. Providing IP addresses and printing services
Answer: A
NEW QUESTION # 110
A technician is setting up a device to use two-factor authentication. Which of the following meets this requirement?
- A. Password/password
- B. Thumbprint/retinal scan
- C. Password/PIN
- D. Password/thumbprint
Answer: D
NEW QUESTION # 111
A hardware technician is configuring a laptop, and the network administrator requires the network settings to be static. The technician successfully pings the servers by IP address but cannot ping the UNC path. Which of the following is the cause of this issue?
- A. Gateway
- B. IP address
- C. Subnet
- D. Domain Name System
Answer: D
Explanation:
The cause of the issue is likely due to a DNS resolution issue. While the technician can ping the servers by IP address, they cannot ping the UNC path, indicating an issue with the name resolution. This can be resolved by configuring the correct DNS server settings.
NEW QUESTION # 112
Which of the following BEST describes a lab environment in which virtual machines can be created, rebooted, and shut down without affecting the production network?
- A. Sandbox
- B. SCADA
- C. Honeypot
- D. Hybrid cloud
Answer: A
Explanation:
A sandbox is a lab environment in which virtual machines can be created, rebooted, and shut down without affecting the production network. This allows for testing and experimentation without the risk of damaging the production environment123..
NEW QUESTION # 113
A user on a SOHO network is unable to watch online videos, even at 240 pixels. The technician runs ipconfig from the user's computer and records the following:
The technician then connects a test laptop to the router via the user's Cat 5 cable and records the following information:
Which of the following is MOST likely causing the user's issue?
- A. Bad network cable
- B. Misconfigured default gateway
- C. Faulty NIC
- D. Incorrect IP address
Answer: C
Explanation:
Explanation
Based on the information recorded by the technician, the network connection appears to be functioning normally. The user's computer is properly configured with an IPv4 address, subnet mask, and default gateway, which should allow the user to access the internet and online videos. The high download and upload speeds and low ping time recorded from the test laptop also indicate that the network is working well. However, the user's inability to watch online videos suggests that there might be an issue with the network card (NIC) on the user's computer. The NIC might be faulty or malfunctioning, which is preventing the computer from receiving and processing the video data. The technician should try replacing the NIC to resolve the issue.
NEW QUESTION # 114
A technician is preparing to set up a gaming computer with the following components:
* Discrete, high-end graphics card
* Video capture card
* High-end processor
* Multiple hard drives
* USB 3.0 hub
* Sound card
Which of the following options is the MOST important for the technician to consider before building the gaming computer?
- A. Redundant power supply
- B. Power supply wattage rating
- C. Modular power supply
- D. 20-pin vs. 24-pin power adapter
Answer: A
NEW QUESTION # 115
A graphic designer wants to purchase a laptop that provides the most accurate color spectrum available when viewed from as many different angles as possible. Which is the following display types would best meet the graphic designer's requirements?
- A. Plasma
- B. LCD
- C. OLED
- D. VGA
Answer: C
Explanation:
Explanation
Graphic design
Explore
The correct answer is C. OLED.
OLED stands for Organic Light-Emitting Diode, and it is a type of display technology that uses organic compounds to create light and color. Unlike LCD (Liquid Crystal Display) or Plasma displays, OLED does not require a backlight or a filter to produce images. This means that OLED can offer higher contrast, wider color gamut, and better viewing angles than other display types.
LCD displays use liquid crystals that are sandwiched between two polarizing filters and illuminated by a backlight. The liquid crystals can change their orientation and block or allow light to pass through the filters.
LCD displays can have different panel types, such as IPS (In-Plane Switching), VA (Vertical Alignment), or TN (Twisted Nematic), which affect the color accuracy, response time, and viewing angles of the display.
Plasma displays use gas-filled cells that are electrically charged to create plasma, which emits ultraviolet light.
The ultraviolet light then excites phosphors that emit visible light and color. Plasma displays can produce deep blacks and high contrast, but they are also prone to image retention, screen burn-in, and high power consumption.
VGA stands for Video Graphics Array, and it is not a display type but a video interface standard that was introduced in 1987. VGA can transmit analog signals from a computer to a monitor, but it has low resolution and limited color depth compared to modern digital standards such as HDMI or DisplayPort.
Therefore, OLED is the best display type for graphic designers who want the most accurate color spectrum and the widest viewing angles. OLED displays can also be thinner and lighter than LCD or Plasma displays, which makes them ideal for laptops. However, OLED displays are also more expensive and less durable than other display types, and they may suffer from image retention or burn-in over time.
NEW QUESTION # 116
A desktop support technician is tasked with upgrading a laptop so that it has the fastest data access possible.
Which of the following BEST satisfies this requirement?
- A. 2.5SATASSD
- B. mSATASSD
- C. 2.5SASHHD
- D. M.2NVMeSSD
Answer: D
Explanation:
Explanation
M.2 NVMe SSD provides the fastest data access possible for a laptop. It is a high-performance solid-state drive that connects directly to the motherboard through an M.2 slot.
NEW QUESTION # 117
......
Free 220-1101 Exam Questions 220-1101 Actual Free Exam Questions: https://www.fast2test.com/220-1101-premium-file.html
100% Free 220-1101 Exam Dumps to Pass Exam Easily: https://drive.google.com/open?id=16zpfqTygoujho2ZCOnfFtI3HlT3V7SwO