Real 2V0-41.20 are Uploaded by Fast2test provide 2022 Latest 2V0-41.20 Practice Tests Dumps.
All 2V0-41.20 Dumps and Professional VMware NSX-T Data Center Training Courses Help candidates to study and pass the Professional VMware NSX-T Data Center Exams hassle-free!
Topics of Professional VMware NSX-T Data Center 2V0-41.20 Exam
Candidates should recognise each of the following aims prior to taking this exam. Each objective is described below; the applicant should have experience with and associated documentation along with relevant resources. That includes data relevant to the target. All applicable product information should be familiar to the applicant or have an equivalent skill set.
It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Professional VMware NSX-T Data Center 2V0-41.20 examination is listed below in detail of each section and their topics:
1. Architectures and Technologies
There are no testable objectives covered by this section.
2. VMware Products and Solutions
Objectives covered by this section:
- Differentiate the Functionalities of MP, CCP, DP and Consumption Planes
- Identify the Supported Integration Platforms of NSX-T Data Center (Containers, Public Cloud, Private Cloud, Hybrid Cloud, DevOps tools, 3rd Party etc.)
- Describe the NSX-T Data Center Network Services
- Describe NSX-T Data Center Architecture and Component Sub-systems
- Describe the VMware Virtual Cloud Network Vision
- List the Use-cases for NSX-T Data Center
- Explain the NSX-T Data Center Security Architecture and Features
- Describe the Logical Switching Architecture and Features
- Identify Physical and Virtual Infrastructure Requirements for NSX-T Data Center
- Describe the Logical Routing Architecture and Features
- Outline the Solutions of NSX Portfolio
- Define NSX-T Data Center Terminology
3. Planning and Designing
There are no testable objectives covered by this section.
4. Installing, Configuring, and Setup
Objectives covered by this section:
- Configure NSX-T Edge Nodes and Edge Cluster
- Configure NSX-T Data Center Network Services (Layer-3)
- Outline the installation and Preparation Workflow of NSX-T Data Center
- Configure Hypervisor Networking (vSphere and KVM) for NSX-T Data Center
- Configure Service Insertion with NSX-T Data Center
- Configure NSX-T Data Center Security Features
- Configure and Manage Logical Switching Features
5. Performance-tuning, Optimization, Upgrades
There are no testable objectives covered by this section.
6. Troubleshooting and Repairing
Objectives covered by this section:
- Troubleshoot Common Physical Infrastructure Issues
- Identify the default Log File Locations of NSX-T Data Center Components
- Troubleshoot Common Connectivity Issues
7. Administrative and Operational Tasks
Objectives covered by this section:
- List Operations Tasks in a VMware NSX-T Data Center Environment (syslog, backup/restore etc.)
- Configure Roles and Permissions for NSX-T Data Center Environment
- Generate Log Bundles
- Monitor a VMware NSX-T Data Center Implementation
NEW QUESTION 19
What are three characteristics of a transport zone? (Choose three.)
- A. defines the scope and reachability of a Segment
- B. configured with multiple N-VDS
- C. defines the potential reach of transport nodes
- D. optional for creating a segment
- E. configured with a Single N-VDS
Answer: A,C,E
NEW QUESTION 20
Which CLI command is used to start the NSX Manager virtual machine in the KVM environment?
- A. virsh poweron <nsx-manager-ID>
- B. virsh poweron <nsx-manager-name>
- C. virsh start <NSX-Manager-ID>
- D. virsh start <NSX-Manager-Name>
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 21
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?
- A. get support-bundle file vcpnv.tgz
- B. esxcli system syslog config logger set --id=nsxmanager
- C. set support-bundle file vcpnv.tgz
- D. vm-support
Answer: A
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 22
How does Traceflow tool identify issues in a network?
- A. Injects synthetic traffic into the data plane and observes the results in the control plane.
- B. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
- C. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
- D. Injects ICMP traffic into the data plane and observes the results in the control plane.
Answer: A
NEW QUESTION 23
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. set timezone
- B. get timezone
- C. set ntp-server
- D. set time-server
Answer: C
NEW QUESTION 24
What are two supported N-VDS modes? (Choose two.)
- A. Standard Datapath
- B. Enhanced Datapath
- C. DPDK Datapath
- D. Overlay Datapath
- E. Secure Datapath
Answer: A,B
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D
NEW QUESTION 25
What are two supported N-VDS modes? (Choose two.)
- A. Standard Datapath
- B. Enhanced Datapath
- C. DPDK Datapath
- D. Overlay Datapath
- E. Secure Datapath
Answer: A,B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D-CFBB31908D1C.html
NEW QUESTION 26
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. traffic load balancing
- B. increased north/south bandwidth
- C. Failover of services
- D. stateful services leveraged
- E. traffic predictability
Answer: A,B
NEW QUESTION 27
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
- A. set timezone
- B. et time-server
- C. get timezone
- D. set ntp-server
Answer: D
NEW QUESTION 28
An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide north-south connectivity for the VMs.
Which routing component must be deployed?
- A. Edge Services Gateway
- B. Tier-0 Gateway
- C. Tier-1 Gateway
- D. Layer 2 Gateway
Answer: B
NEW QUESTION 29
How many IPs are required when deploying a highly available NSX Management Cluster with VIP in a production environment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
Explanation
NEW QUESTION 30
Which log is used to see a failed NSX-T installation of a VIB package on ESXi transport nodes?
- A. /var/l og/hostd. log
- B. /var/log/esxupdate.log
- C. /var/log/syslog.log
- D. /var/log/vmware/eam/eam.log
Answer: C
NEW QUESTION 31
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Route Aggregation
- B. BGP Neighbors
- C. Graceful Restart
- D. Route Distribution
- E. Local AS
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.
Answer: A,B
NEW QUESTION 32
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is created.
- B. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- D. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
Answer: B
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BEBF-8D109FDB577C.html
NEW QUESTION 33
A DevOps user has deployed a Kubernetes Pod in vSphere.
What does the term ClusterIP represent within NSX-T?
- A. Deployment of T0 and T1
- B. Deployment of Distributed Router.
- C. Deployment of Distributed Load Balancing service.
- D. Deployment of T1 with NLB service.
Answer: C
NEW QUESTION 34
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.
Which failover detection protocol must be used to meet this requirement?
- A. Beacon Probing (BP)
- B. Host Standby Router Protocol (HSRP)
- C. Virtual Router Redundancy Protocol (VRRP)
- D. Bidirectional Forwarding Detection (BFD)
Answer: D
NEW QUESTION 35
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
- A. Automatically created when Tier-1 is created.
- B. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.
- C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
- D. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
Answer: B
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-BE
NEW QUESTION 36
An NSX administrator is reviewing syslog and notices that Distributed Firewall Rules hit counts are not being logged. What could cause this issue?
- A. Zero Trust Security is not enabled
- B. Syslog is not configured on the ESXi transport node
- C. Distributed Firewall Rule logging is not enabled
- D. Syslog is not configured on the NSX Manager
Answer: C
NEW QUESTION 37
Which command is used to set the NSX Manager's logging-level to debug mode for troubleshooting?
- A. set service nsx-manager logging-level debug
- B. set service nsx-manager log-level debug
- C. set service manager logging-level debug
- D. set service manager log-level debug
Answer: C
Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
NEW QUESTION 38
......
Difficulty in Writing Professional VMware NSX-T Data Center 2V0-41.20 Exam
One of the most important certifications that applicants may have on their resume is Professional VMware NSX-T Data Center 2V0-41.20 certified. One of the key problems faced by most candidates is to choose the right research materials for their exam preparation since they use the internet to find too much data that makes it difficult for them to trust, which would be helpful for them.
Professional VMware NSX-T Data Center 2V0-41.20 exam is not an easier one and can turn out to be a very difficult certification if not well prepared. If professionals give 2V0-41.20 practice exams, they can better prepare for the exam while having understanding of the exam format and types of questions asked.
Applicants may, however, clear the exam with the right concentration and the right preparation material. Fast2test have the most up-to-date learning materials, having a fair understanding of the question trend being asked in real certification with the help of these 2V0-41.20 practice exams aspirants. For all of the changes in the course, the experts check Fast2test 2V0-41.20 exam dumps. Fast2test also include practise testing, which proves to be an outstanding forum for testing the information gained. Refer to the links down below to access the study materials.
Valid Way To Pass VMware's 2V0-41.20 Exam with : https://www.fast2test.com/2V0-41.20-premium-file.html