[Sep-2021] Pass Cisco 352-001 Exam in First Attempt Guaranteed! [Q105-Q121]

[Sep-2021] Pass Cisco 352-001 Exam in First Attempt Guaranteed!

Full 352-001 Practice Test and 230 unique questions with explanations waiting just for you, get it now!

NEW QUESTION 105
Which two OSPF design considerations should you implement to support the eventual growth of a network, so that CPU and memory are not affected by the size and complexity of the link-state database in a large service provider network? (Choose two)

A. Turn on the Incremental SPF feature
B. Add redundancy between critical locations
C. Turn on route dampening
D. Turn on packet pacing
E. Add more memory
F. Create network summaries

Answer: A,F

NEW QUESTION 106
You are the lead network designer for an enterprise company called ABC, and you are leading design discussions regarding IPv6 implementation into their existing network. A question is raised regarding older Layer 2 switches that exist in the network, and if any changes are required to these Layer 2 switches for successful IPv6 implementation. Which two responses should you give? (Choose two.)

A. If IPv6 multicast deployment is planned, then make sure that Layer 2 switches support MLD snooping at Layer 2 switches.
B. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ND snooping at Layer 2 switches.
C. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support ICMPv6 snooping at Layer 2 switches.
D. If IPv6 anycast deployment is planned, then make sure that Layer 2 switches support DHCPv6 snooping at Layer 2 switches.
E. IPv6 is transparent on Layer 2 switches, so there is no need to make any changes to the Layer 2 switches.

Answer: A,E

NEW QUESTION 107

Refer to the exhibit. You are asked to design this OSPF network to converge within 60 ms for unicast packets after a link topology changes due to a single link failure. Which technology can be enabled while conforming to the design requirements?

A. RSVP-TE Fast Reroute
B. BFD
C. IGP SPF- timer tuning
D. IGP neighbor timer tuning
E. Loop-Free Alternates

Answer: B

Explanation:
Explanation

https://www.cisco.com/en/US/technologies/tk648/tk365/tk480/technologies_white_paper0900aecd80244005.htm

NEW QUESTION 108
Which three network management requirements are common practices in network design? (Choose three)

A. Look at average counters instead of instantaneous counters for inconsistent and bursty KPIs, such as CPU utilization and interface utilization.
B. Validate data plane health, and application and services availability, with synthetic traffic.
C. Capture both ingress and egress flow-based packets, while avoiding duplication of flows.
D. Ensure that all network devices have their clocks synchronized.
E. Collect SNMP poll information for future regression analysis.

Answer: A,D,E

NEW QUESTION 109
Refer to the exhibit.

This new OSPF network has four areas, but the hub-and-spoke area experiences frequent flapping. You must fix this design failure. Which two mechanisms can you use to isolate the data center area from the hub-and-spoke area without losing IP connectivity? (Choose two.)

A. Make the DC area an NSSA.
B. Convert the DC area to EIGRP protocol.
C. Deploy a prefix summarization on router
D. Use OSPF distribute-list filtering on router A.
E. Make the DC area totally stub.

Answer: C,E

NEW QUESTION 110
Refer to the exhibit.

In this BGP design, what is the next hop for 10.1.1.0/24 on R8 and R7?

A. The next hop for 10.1.1.0/24 on R7 is R6 and the next hop for R8 is R5.
B. The next hop for 10.1.1.0/24 on R7 is R8 and the next hop for R8 is R7.
C. The next hop for 10.1.1.0/24 on R7 is R5 and the next hop for R8 is R6.
D. The next hop for 10.1.1.0/24 on R7 is R3 and the next hop for R8 is R4.

Answer: B

Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION 111
Study the subject carefully, then answer the following question. A service provider has an MPLS VPN network in USA. It recently bought another provider in India and would like to quickly integrate the newly acquired provider's network into the existing MPLS VPN infrastructure via the Internet. Which two technologies will be used by the service provider to integrate its new network? (Choose two.)

A. MPLS over L2TPv3
B. MPLS over IPv6
C. MPLS based VPWS
D. MPLS over GRE

Answer: A,D

Explanation:
Section: (none)
Explanation/Reference:

NEW QUESTION 112
Which is the reason that EIGRP uses queries?

A. to test for neighbor state when the network topology is in flux
B. to find alternate loop-free paths that have been discarded due to split horizons
C. to withdraw routing information from the network
D. to test known alternate paths and determine if they are loop-free

Answer: B

Explanation:
Section: (none)
Explanation/Reference:

NEW QUESTION 113
Refer to the exhibit.

Refer to the exhibit. This customer uses Gigabit Ethernet on all router interfaces and gets point-to-point Layer 2 VPN connections from their telco provider This network runs IS-IS with default parameters. Which action manipulates traffic flow so that router A traffic takes the high-speed links as the preferred path when routing to router H?

A. Match the interface bandwidth with the actual circuit speed
B. Adjust the reference bandwidth used to calculate the interface metrics.
C. Manually adjust the interface metrics
D. Manually adjust the delay parameters on the circuits

Answer: B

NEW QUESTION 114
What are two functions of an NSSA in an OSPF network design? (Choose two.)

A. It allows ASBRs to inject external routing information into the area.
B. It overcomes issues with suboptimal routing when there are multiple exit points from the area.
C. It uses opaque LSAs.
D. An ASBR advertises Type 7 LSAs into the area.
E. An ABR advertises Type 7 LSAs into the area.

Answer: A,D

Explanation:
Explanation/Reference:
Explanation:

NEW QUESTION 115
What is a key design aspect to be considered when designing an IP network that will be carrying real-time VoIP traffic?

A. Minimizing total bidirectional end-to-end delay to 0-50 ms
B. Minimizing total unidirectional end-to-end delay to 150-500 ms
C. Minimizing total unidirectional end-to-end delay to 0-150 ms
D. Minimizing total bidirectional end-to-end delay to 0-150 ms

Answer: C

NEW QUESTION 116
How are community formats sent in SNMPv1 and SNMPv2c?

A. In both protocols they are encrypted.
B. In SNMPv1 they are sent as clear text and in SNMPv2c they are sent as part of an encrypted session.
C. In SNMPv1 they are sent as clear text and in SNMPv2c they are encrypted.
D. In both protocols they are sent as clear text.

Answer: D

NEW QUESTION 117
A switched network is being designed to support a manufacturing factory. Due to cost constraints, fiber- based connectivity is not an option. Which design allows for a stable network when there is a risk of interference from the manufacturing hardware in use on the factory floor?

A. Design the network to include loop guard to prevent a loop in the switched network when a link has too much interference.
B. Design the network to include EtherChannel bundles to prevent a single-link failure from taking down a switch interconnection point.
C. Design the network to include UDLD to detect unidirectional links and take them out of service.
D. Design the network to include BackboneFast on all devices to accelerate failure convergence times.

Answer: C

NEW QUESTION 118
Refer to the exhibit.

A service provider using IS-IS has designed this network with all core links at the Layer 2 control plane. How will they adjust the design to reduce the flooding of update packets?

A. Change the area type of the links to be level-1-2to allow level-1 updates.
B. Use IS-IS mesh groups.
C. Change the network type of the links from broadcast to point-to-point.
D. Configure SPF timers to be more aggressive so that updates are more quickly cleared from the queue.

Answer: B

Explanation:
Section: Layer 3 ControlPlane
Explanation/Reference:

NEW QUESTION 119
A company is planning to deploy high-availability cluster support for their servers in a collapsed core data center design. Which issue should be a concern with this design?

A. NIC teaming
B. Layer 3 domain sizing
C. Layer 2 domain sizing
D. MAC address aging

Answer: C

NEW QUESTION 120
A retail company has 250 branches connected to the core via MPLS Layer 3 VPN. The company is migrating from traditional telephony services to a VoIP solution. Which two primary concerns when implementing a VoIP solution are true? (Choose two.)