The Best Practice Test Preparation for the 300-730 Certification Exam
300-730 Exam Dumps, Practice Test Questions BUNDLE PACK
Cisco 300-730 certification exam, also known as Implementing Secure Solutions with Virtual Private Networks (SVPN), is designed for IT professionals who want to validate their skills in implementing secure VPN solutions using Cisco technologies. 300-730 exam is part of the Cisco Certified Network Professional (CCNP) Security certification track and is intended for candidates who have already earned the CCNA Security certification or have equivalent experience.
NEW QUESTION # 12
A user at a company HQ is having trouble accessing a network share at a branch site that is connected with a L2L IPsec VPN. While troubleshooting, a network security engineer runs a packet tracer on the Cisco ASA to simulate the user traffic and discovers that the encryption counter is increasing but the decryption counter is not. What must be configured to correct this issue?
- A. Adjust the preshared key on the remote peer to allow traffic to flow over the tunnel.
- B. Adjust the peer IP address on the remote peer to direct traffic back to the ASA.
- C. Adjust the routing on the remote peer device to direct traffic back over the tunnel.
- D. Adjust the transform set to allow bidirectional traffic.
Answer: C
NEW QUESTION # 13
A network engineer is installing Cisco AnyConnect on company laptops so that users can access corporate resources remotely. The VPN concentrator is a Cisco router running IOS-XE 16.9.1 code and configured as a FlexVPN server that uses local authentication and *$Cisc431089017$* as the key-id for the IKEv2 profile. Which two steps must be taken on the computer to allow a successful AnyConnect connection to the router? (Choose two.)
- A. In the Cisco AnyConnect XML profile, add the hostname and host address to the server list.
- B. In the Cisco AnyConnect XML profile, set the IPsec Authentication method to EAP-AnyConnect.
- C. In the Cisco AnyConnect Local Policy, add the router IP address to the Update Policy.
- D. In the Cisco AnyConnect Local Policy, set the BypassDownloader option in the local to true.
- E. In the Cisco AnyConnect XML profile, set the user group field to DefaultAnyConnectClientGroup.
Answer: A,C
Explanation:
B) In the Cisco AnyConnect XML profile, adding the hostname and host address to the server list ensures that the AnyConnect client knows the address of the VPN concentrator (router) to connect to. E. In the Cisco AnyConnect Local Policy, adding the router IP address to the Update Policy allows the client to connect to the router for updates and configuration.
NEW QUESTION # 14
Refer to the exhibit.
Which type of mismatch is causing the problem with the IPsec VPN tunnel?
- A. crypto access list
- B. Phase 1 policy
- C. transform set
- D. preshared key
Answer: D
NEW QUESTION # 15
What is a requirement for smart tunnels to function properly?
- A. Applications must be UDP.
- B. Stateful failover must not be configured.
- C. The user on the client machine must have admin access.
- D. Java or ActiveX must be enabled on the client machine.
Answer: D
NEW QUESTION # 16
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. Smart Tunnel
- B. WebType ACL
- C. single sign-on
- D. plug-ins
Answer: A
Explanation:
Section: Remote access VPNs
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/ asa_90_cli_config/vpn_clientless_ssl.html#29951
NEW QUESTION # 17
Refer to the exhibit.
Users cannot connect via AnyConnect SSLVPN. Which action resolves this issue?
- A. Add an IPsec preshared key to the group policy.
- B. Configure the HTTP server to listen on port 443.
- C. Add ssl-client to the allowed list of VPN protocols.
- D. Configure the ASA to act as a DHCP server.
Answer: C
NEW QUESTION # 18
Refer to the exhibit.
Which type of VPN implementation is displayed?
- A. IKEv2 load balancer
- B. IKEv2 backup gateway
- C. IKEv2 reconnect
- D. IKEv1 cluster
Answer: A
NEW QUESTION # 19
A network engineer must design a clientless VPN solution for a company. VPN users must be able to access several internal web servers. When reachability to those web servers was tested, it was found that one website is not being rewritten correctly by the ASA.
What is a potential solution for this issue while still allowing it to be a clientless VPN setup?
- A. Set up a WebACL to permit the IP address of the web server.
- B. Set up a smart tunnel with the IP address of the web server.
- C. Set up Cisco AnyConnect with a split tunnel that has the IP address of the web server.
- D. Set up a NAT rule that translates the ASA public address to the web server private address on port 80.
Answer: D
NEW QUESTION # 20
A network engineer must implement an SSLVPN Cisco AnyConnect solution that supports 500 concurrent users, ensures all traffic from the client passes through the ASA, and allows users to access all devices on the inside interface subnet (192.168.0.0/24). Assuming all other configuration is set up appropriately, which configuration implements this solution?
- A. Option A
- B. Option C
- C. Option B
- D. Option D
Answer: A
NEW QUESTION # 21
Refer to the exhibit.
A user is connecting from behind a PC with a private IP Address. Their ISP provider is blocking TCP port 443. Which AnyConnect XML configuration will allow the user to establish a connection with the ASA?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: A
NEW QUESTION # 22
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.
Answer:
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_dmvpn/configuration/xe-16/sec-conn-dmvpn-xe-16-book/sec-conn-dmvpn-summ-maps.html
NEW QUESTION # 23
Refer to the exhibit.
An engineer is troubleshooting a new GRE over IPsec tunnel. The tunnel is established but the engineer cannot ping from spoke 1 to spoke 2. Which type of traffic is being blocked?
- A. ESP packets from spoke1 to spoke2
- B. ISAKMP packets from spoke2 to spoke1
- C. ESP packets from spoke2 to spoke1
- D. ISAKMP packets from spoke1 to spoke2
Answer: C
NEW QUESTION # 24
Which technology and VPN component allows a VPN headend to dynamically learn post NAT IP addresses of remote routers at different sites?
- A. GETVPN with ISAKMP
- B. GETVPN with NHRP
- C. DMVPN with NHRP
- D. DMVPN with ISAKMP
Answer: C
NEW QUESTION # 25
Which two NHRP functions are specific to DMVPN Phase 3 implementation? (Choose two.)
- A. resolution request
- B. redirect
- C. registration reply
- D. registration request
- E. resolution reply
Answer: A,D
Explanation:
Registration request is used by spoke routers to send a registration request to the hub router. The registration request includes the IP address of the spoke router and the protocol information. The hub router then sends a registration reply, which includes the IP address of the hub router.
Resolution request is used by spoke routers to send a resolution request to the hub router. The resolution request includes the IP address of the destination router. The hub router then sends a resolution reply, which includes the IP address of the destination router.
NEW QUESTION # 26
Refer to the exhibit.
The customer must launch Cisco AnyConnect in the RDP machine. Which IOS configuration accomplishes this task?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 27 
Refer to the exhibit. The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls
NEW QUESTION # 28
Which requirement is needed to use local authentication for Cisco AnyConnect Secure Mobility Clients that connect to a FlexVPN server?
- A. use of certificates instead of username and password
- B. EAP-AnyConnect
- C. AnyConnect profile
- D. EAP query-identity
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/200555-FlexVPN-AnyConnect-IKEv2- Remote-Access.html
NEW QUESTION # 29
After a user configures a connection profile with a bookmark list and tests the clientless SSLVPN connection, all of the bookmarks are grayed out. What must be done to correct this behavior?
- A. Specify the correct port for the web server under the bookmark.
- B. Apply the bookmark to the correct group policy.
- C. Verify HTTP/HTTPS connectivity between the Cisco ASA and the web server.
- D. Configure a DNS server on the Cisco ASA and verify it has a record for the web server.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/security-vpn/webvpn-ssl-vpn/119417-config-asa-00.html#anc15:~:text=simultaneous%2Dlogins%2020-,WebVPN%20Clients%20Cannot%20Hit%20Bookmarks%20and%20is%20Grayed%20Out,-Problem
NEW QUESTION # 30
Refer to the exhibit.
Which value must be configured in the User Group field when the Cisco AnyConnect Profile is created to connect to an ASA headend with IPsec as the primary protocol?
- A. group-alias
- B. address-pool
- C. tunnel-group
- D. group-policy
Answer: C
Explanation:
The user group is used in conjunction with Host Address to form a group-based URL. If you specify the Primary Protocol as IPsec, the User Group must be the exact name of the connection profile (tunnel group). For SSL, the user group is the group-url of the connection profile. https://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyconnect40/administration/guide/b_AnyConnect_Administrator_Guide_4-0/anyconnect-profile-editor.html#ID-1430-0000026c
NEW QUESTION # 31
Refer to the exhibit.
Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA. Which command on the ASA is missing?
- A. dns-server value 10.1.1.2
- B. same-security-traffic permit inter-interface
- C. same-security-traffic permit intra-interface
- D. dns-server value 10.1.1.3
Answer: C
Explanation:
The same-security-traffic intra-interface command lets traffic enter and exit the same interface, which is normally not allowed. This feature might be useful for VPN traffic that enters an interface, but is then routed out the same interface. The VPN traffic might be unencrypted in this case, or it might be reencrypted for another VPN connection. For example, if you have a hub and spoke VPN network, where the security appliance is the hub, and remote VPN networks are spokes, for one spoke to communicate with another spoke, traffic must go into the security appliance and then out again to the other spoke.
NEW QUESTION # 32
Which technology works with IPsec stateful failover?
- A. VRRP
- B. GRE
- C. GLBR
- D. HSRP
Answer: D
Explanation:
HSRP (Hot Standby Router Protocol). HSRP is a Cisco proprietary protocol that provides stateful failover for IPsec virtual private networks (VPNs). It is used to create a virtual router in order to provide redundancy in the event of an IPsec VPN failure. HSRP works by assigning a single primary router to manage the connection and forwarding traffic to the secondary router if the primary router fails.
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_conn_vpnav/configuration/15-mt/sec-vpn-availability-15-mt-book/sec-state-fail-ipsec.html
NEW QUESTION # 33
Refer to the exhibit.
Client 1 cannot communicate with client 2. Both clients are using Cisco AnyConnect and have established a successful SSL VPN connection to the hub ASA.
Which command on the ASA is missing?
- A. dns-server value 10.1.1.2
- B. same-security-traffic permit inter-interface
- C. same-security-traffic permit intra-interface
- D. dns-server value 10.1.1.3
Answer: C
Explanation:
The same-security-traffic intra-interface command lets traffic enter and exit the same interface, which is normally not allowed. This feature might be useful for VPN traffic that enters an interface, but is then routed out the same interface. The VPN traffic might be unencrypted in this case, or it might be reencrypted for another VPN connection. For example, if you have a hub and spoke VPN network, where the security appliance is the hub, and remote VPN networks are spokes, for one spoke to communicate with another spoke, traffic must go into the security appliance and then out again to the other spoke.
NEW QUESTION # 34
An engineer notices that while an employee is connected remotely, all traffic is being routed to the corporate network. Which split-tunnel policy allows a remote client to use their local provider for Internet access when working from home?
- A. excludespecified
- B. excludeall
- C. tunnelspecified
- D. tunnelall
Answer: C
NEW QUESTION # 35
A router is being configured for IKEv2 AnyConnect using AnyConnect-EAP. How would the administrator separate profiles for administrators and employees so that authorization differs when they connect?
- A. Define key-ids on the headend and create two XML profiles to match the administrator and user key-ids.
- B. Define group aliases on the headend and have the user pick the appropriate alias when they connect
- C. Define group-urls on the headend and create two XML profiles to match the administrator and user group urls
- D. Create a certificate map and match on the appropriate certificate fields
Answer: B
Explanation:
When configuring IKEv2 AnyConnect using AnyConnect-EAP, the administrator can define group aliases on the headend and have the user pick the appropriate alias when they connect. This allows the administrator to separate profiles for administrators and employees so that authorization differs when they connect.
NEW QUESTION # 36
......
How much does a Cisco 300-730 Certification cost?
The cost of the Cisco 300-730 Exam is $300 USD.
Cisco 300-730 certification exam is designed to test the skills and knowledge of IT professionals in implementing secure virtual private networks (VPNs). 300-730 exam focuses on the latest technologies and best practices for implementing secure VPN solutions in a variety of network environments. Implementing Secure Solutions with Virtual Private Networks certification is ideal for network engineers, security engineers, and system engineers who are responsible for designing, implementing, and managing secure VPN solutions.
Prepare for the Actual CCNP Security 300-730 Exam Practice Materials Collection: https://www.fast2test.com/300-730-premium-file.html
CCNP Security Certification 300-730 Sample Questions Reliable: https://drive.google.com/open?id=1ch2Hn9FsAH8VBw1ooDznZ0r_IGlwxERT