[UPDATED 2023] Network Appliance NS0-527 Questions Prepare with Free Demo of PDF
NEW 2023 Certification Sample Questions NS0-527 Dumps & Practice Exam
NetApp NS0-527 Exam Topics:
| Section | Objectives |
|---|---|
| NetApp ONTAP Business Continuity Solutions | - Demonstrate knowledge of MetroCluster operations - Demonstrate knowledge of SnapMirror business continuity solutions - Demonstrate knowledge of SVM-DR operations |
| NetApp Data Protection Software | - Describe how to install NetApp data protection software - Demonstrate knowledge of how to administer NetApp data protection software |
NEW QUESTION 86
You have a VMware VSphere environment with SRM and NetApp SRA fully configured.
Which twostatements are true? (Choose two.)
- A. NetApp clustered Data ONTAP supports a mixed ALUA configuration where some igroups have ALUA enabled and others do not.
- B. NetApp SRA supports the use of the FC protocol at one site and the iSCSI protocol at the other site.
- C. NetApp SRA supports the failover of SnapVault and SnapMirror relationships.
- D. NetApp SRA supports both LUN attached and NFS mounted datastores.
Answer: B,D
NEW QUESTION 87
Click the Exhibit button.
You are asked to set up aSnapMirror relationship to protect some Oracle DB volumes on both nodes of the aff-01 and aff-02 clusters. You are using the 1 Gb network and the other nodes all have free space to support the mirror.
Referring to the exhibit, which two nodes would provide the least network transfer time for the relationship?
(Choose two.)
- A. aff-02 to ontap9-tme-8040-02
- B. aff-02 to ontap9-tme-8040-01
- C. aff-02 to tme-ontap-prd-02
- D. aff-01 to tme-ontap-prd-01
Answer: A,C
NEW QUESTION 88
Click the Exhibit button.
A customer needs to add an additional X91143A card into a FAS9000 to allow mirroring between theproduction system and the disaster recovery FAS9000 platform. Slots 1, 4, 6, 8, and 9 have cards in them.
Referring to the exhibit, in which slot should you install the card?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 89
You have a NAS volume containing 100 GB of data and daily change rate of 10%. You want to keep seven daily Snapshot copies. What is the minimum size for the volume?
- A. 100 GB
- B. 220 GB
- C. 170 GB
- D. 110 GB
Answer: C
NEW QUESTION 90
Given the command shown below: snapmirror policy add-rule -vserver vs1 -policy policy -snapmirror-label weekly -keep 52
What does this command do?
- A. It retains 52 weekly Snapshot copies on the source volume.
- B. It retains 52 weekly Snapshot copies on the source storage virtual machine.
- C. It retains 52 weekly Snapshot copies on the destination volume.
- D. It retains 52 weekly Snapshot copies on the destination storage virtual machine.
Answer: D
NEW QUESTION 91
You are using OnCommand Unified Manager to monitor the health and availability of your data protection relationships.
In this situation, what must be added to enable you to create, break, and resynchronize relationships?
- A. OnCommand Insight
- B. SnapCenter
- C. OnCommand Workflow Automation
- D. OnCommand System Manager
Answer: C
NEW QUESTION 92
Your customer wants to replicate data between two NetApp clusters in different data centers.
Which two actions must be performed to accomplish this task? (Choose two.)
- A. A peer relationship must be created between the two clusters.
- B. Every inter-cluster LIF must be configured on the same port with a data LIF.
- C. One inter-cluster LIF on each node must be configured.
- D. Every controller inboth clusters must have at least one inter-cluster LIF configured.
Answer: A,C
NEW QUESTION 93
You received an alert from OnCommand Unified Manager (OCUM) that a NetApp FlexVol is almost out of space. Which three actions are available to perform from the OCUM events detail Web page?
(Choose three.)
- A. Add a note to the event.
- B. Increase the capacity of the FlexVol.
- C. Create a job to move the FlexVol.
- D. Acknowledge the event.
- E. Mark the event as "resolved".
Answer: A,D,E
NEW QUESTION 94
You want to determine the amount of cold data that can be tiered from a FabricPool-enabled aggregate.
In thisscenario, which feature satisfies this requirement?
- A. Inactive Data Reporting
- B. Auto Balance
- C. Object Store Profiler
- D. Information Lifecycle Management
Answer: A
Explanation:
Explanation
First available in ONTAP 9.4, inactive data reporting (IDR) is an excellent tool for determining the amount of inactive (cold) data that can be tiered from an aggregate. IDR is enabled by default on FabricPool aggregates.
More important, you can enable it on non-FabricPool aggregates by using the ONTAP CLI, to get visibility on how much youcan gain by deploying FabricPool.
NEW QUESTION 95
An administrator notices that a NAS volume has been filled completely by active data and Snapshot copies that have expanded over the Snap reserve. The volume is no longer writable.
In this scenario, which two actions must you take to make the volume writable again? (Choose two.)
- A. Delete the SnapMirror relationships.
- B. Delete the files in the active file system.
- C. Delete the SnapVault relationships.
- D. Delete Snapshot copies until space is available.
Answer: C,D
NEW QUESTION 96
On a Windows host, you want to make a consistent database backup of a physical SQL server where the database is on iSCSI-connected LUNs on aclustered Data ONTAP system.
In addition to SnapDrive for Windows, which three NetApp software products should be installed to satisfy this requirement? (Choose three.)
- A. Snap Manager for SQL
- B. On Command Unified Manager
- C. Microsoft iSCSI Software Initiator
- D. On Command Workflow Automation
- E. iSCSI Host Utilities
Answer: A,C,E
NEW QUESTION 97
What are two NetApp data protection solutions? (Choose two.)
- A. RecoverPoint
- B. SnapVault
- C. SnapMirror
- D. TimeFinder
Answer: B,C
Explanation:
Explanation
(http://www.storagefreak.net/2013/11/snapvault-vs-snapmirror-what-is-the-difference)
NEW QUESTION 98
Click the Exhibit button.
Your customer has recently implemented a FabricPool solution that uses the default configuration. They notice that no data has moved to the cloud tier. Your customer is concerned that FabricPool might not be functioning properly.
Referring to the exhibit, what is causing the problem?
- A. The performance tier is not 90% full.
- B. The performance tier is not 50% full.
- C. The performance tier is not 100% full.
- D. The performance tier is not 75% full.
Answer: B
NEW QUESTION 99
Your customer wants to implement a mirroring solution between two NetApp controllers.
Which solution would you recommend tothe customer?
- A. Snapshot copies
- B. SnapMirror
- C. Snapcreator
- D. SnapRestore
Answer: B
NEW QUESTION 100
Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.
In this scenario, what must the customer do tocreate the SnapMirror relationship?
- A. The customer can create a XDP type SnapMirror relationship withoutneeding to perform an upgrade.
- B. The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP
8.3 and then create the XDP SnapMirror relationship. - C. The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP
9.1 and then createthe XDP SnapMirror relationship. - D. The customer can create a DP type SnapMirror relationship without needing to perform an upgrade.
Answer: B
NEW QUESTION 101
......
NS0-527 Deluxe Study Guide with Online Test Engine: https://www.fast2test.com/NS0-527-premium-file.html
NS0-527 Test Prep Training Practice Exam Questions Practice Tests: https://drive.google.com/open?id=1Y9Zt_Uz1nzQEZazzmTzYbjjc67fGDJA4