Updated Dec-2023 100% Cover Real E_S4HCON2023 Exam Questions - 100% Pass Guarantee
Use Real SAP Dumps - 100% Free E_S4HCON2023 Exam Dumps
NEW QUESTION # 20
During the configuration of the DMO for SUM, which Migration Parameter selection is NOT possible for an inplace migration?
- A. Migration repetition option
- B. Table count verification
- C. DMO with system move
- D. Table contents compare
Answer: C
NEW QUESTION # 21
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step "Extraction".
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:
- A. In DMO Migration Preparation
- B. In Process Control Center
- C. In SUM Phaselist
- D. In SUM Parameters
Answer: B,D
NEW QUESTION # 22
You want to use the Custom Code Migration Worklist via Remote Code analysis using the ABAP Test Cockpit (ATC). How can you get the latest content of the simplification database? Please choose the correct answer.
- A. Download it from SAP Support Portal
- B. Generate it by analyzing the specific custom code via RFC
- C. Apply the corresponding SAP note via SAP Note Assistant
- D. Configure it within transaction ATC
Answer: A
NEW QUESTION # 23
In which scenarios do you need to use SUM 2.0 instead of SUM 1.0?
There are 2 correct answers to this question.
Response:
- A. Updating to SAP ECC 6.07 using DMO
- B. SAP S/4HANA conversion to SAP S/4HANA 1709
- C. Using DMO when applying Support Packages to SAP ECC 6.07
- D. Upgrading to SAP ECC 6.08 without using DMO
Answer: B,D
NEW QUESTION # 24
You are performing an SAP S/4HANA conversion with the migration repetition option. After which phase does SUM stop to enable a test cycle?
- A. EU_CLONE_MIG_SOT_RUN
- B. EU_CLONE_MIG_DT_RUN
- C. EU_CLONE_MIG_DT_CREATE
- D. EU_IMPORT_ALL
Answer: B
NEW QUESTION # 25
You are running an SAP ECC system with SAP_BASIS 740, non-Unicode on SAP MaxDB. Which of the following are possible paths to perform an SAP S/4HANA conversion? Note: There are 3 correct answers to this question.
- A. Unicode conversion SAP S/4HANA conversion without database migration Database migration
- B. Unicode conversion SAP S/4HANA conversion including database migration
- C. Unicode conversion Upgrade to SAP ECC with SAP_BASIS 750 including database migrationSAP S/4HANA conversion without database migration
- D. SAP S/4HANA conversion including database migration and Unicode conversion
- E. Unicode conversion Database migration SAP S/4HANA conversion without database migration
Answer: B,C,E
NEW QUESTION # 26
During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:
- A. Execution of XPRAs and AIMs
- B. Creation of the table structures in the new SAP HANA database
- C. Execution of SPAU modification adjustment
- D. Execution of eCATTs for business validation tests
- E. Execution of SPDD modification adjustment
Answer: A,C,D
NEW QUESTION # 27
Regarding an SAP Upgrade, What does the major SAP Note for the version of SUM you are using usually contain?
- A. An overview about possible upgrade paths
- B. AA
- C. The link to different patch levels to SUM
- D. The corrections to the SUM Guide
Answer: A,C,D
NEW QUESTION # 28
What do you need to know about the SAP S/4HANA Conversion Guide? Note: There are 2 correct answers to this question.
- A. It contains a section about the simplification item (SI) checks.
- B. It is a database-specific document.
- C. It explains the database migration option (DMO) of SUM.
- D. It explains where to find information about the custom code analysis.
Answer: A,D
NEW QUESTION # 29
What do you need to consider when performing the SI checks for an SAP S'4I 1ANA conversion? Note There are 2 correct answers to this question.
- A. You need an SAP system based on AS ABAP 7.50 or above for the SI check framework
- B. The errors from the SI checks must be solved, otherwise. SUM will report an error
- C. You need to build up an SI check framework by applying SAP Notes
- D. The SI checks are executed in the development system and the results are transported into the subsequent systems
Answer: A,C
NEW QUESTION # 30
Which of the following SUM activities require a stack XML file calculated by the maintenance planner?
Note: There are 3 correct answers to this question.
- A. SAP S/4HANA conversion including DMO
- B. Prerequisite check
- C. Benchmark tool
- D. DMO without system update
- E. SAP S/4HANA conversion without DMO
Answer: A,B,E
NEW QUESTION # 31
You downloaded content from the SAP note 1000009 ("ASU Toolbox 2008"). Which transaction needs to be executed to use that content in the ASU Toolbox?
Please choose the correct answer.
Response:
- A. /ASU/SSM (ASU Simple Schedule Manager)
- B. /ASU/SHOW_NOTE (Show SAP Note via Web-Browser)
- C. /ASU/START (Start ASU Toolbox)
- D. /ASU/UPGRADE (Start ASU Toolbox in Upgrade Mode)
Answer: C
NEW QUESTION # 32
You are executing a standard SUM procedure to update an SAP system using main configuration mode "Standard". When will the shadow system be stopped for the last time?
Please choose the correct answer.
Response:
- A. At the end of the downtime
- B. Before the downtime starts
- C. As part of the cleanup process
- D. Early in the downtime
Answer: B
NEW QUESTION # 33
During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status "automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?
- A. Before continuing with the next phase SUM asks for a modification adjustment transport
- B. SUM continues with the next phase and your modifications are lost
- C. SUM refuses to continue unless you have marked a transport request as modification adjustment transport
- D. SUM continues with the next phase and your modifications are kept as In the start release
Answer: D
NEW QUESTION # 34
What are the benefits of using the benchmarking option of the DMO for SUM? Note There are 2 correct answers to this question
- A. You can record the modification adjustment during migration and use the transports in the next runs.
- B. You can obtain migration duration tiles from a previous benchmark run that can be used to optimize the next runs
- C. You can verify that the content of the download directory matches the stack XML file.
- D. You can find the optimal number of parallel H3load processes by monitoring host performance
Answer: B,D
NEW QUESTION # 35
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step
"Configuration". For some software components you find entries in the "Calculated level" column.
What does the "Calculated level" indicate for those software components?
Please choose the correct answer.
Response:
- A. The SAP Support Packages contained in the upgrade media
- B. The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner
- C. The SAP Support Packages that will be bound to the upgrade
- D. The SAP Support Packages found in the download directory
Answer: D
NEW QUESTION # 36
You are planning an SAP S/4HANA conversion. Which conversion-specific tasks need to be performed during the preparation phase?
There are 2 correct answers to this question.
Response:
- A. Check the compatibility of custom code with SAP S/4HANA
- B. Apply the recommendations of the simplification list
- C. Run the database migration to the SAP HANA database
- D. Perform the migration of data into the new data structure
Answer: A,B
NEW QUESTION # 37
You are performing an SAP S/4HANA conversion. Which phases are executed during SUM technical downtime? Note: There are 2 correct answers to this question
- A. PARDIST_SHD
- B. TABIMJJPG
- C. TABIM_SHADOW_*
- D. PARMVNT_UPG
Answer: B
NEW QUESTION # 38
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime. You have chosen table count verification, but not table contents comparison.
Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center, you can see 40 process buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?
- A. These are 40 pairs of Reload processes, so there are 80 R3load processes running.
- B. SUM is still running in uptime; the 40 defined Reload processes are considered.
- C. There are 40 Reload processes used for copying and 40 Reload processes for table count verification.
- D. Without table contents comparison, only 40 R3load processes are being started.
Answer: D
NEW QUESTION # 39
......
E_S4HCON2023 Dumps PDF - E_S4HCON2023 Real Exam Questions Answers: https://www.fast2test.com/E_S4HCON2023-premium-file.html
Realistic E_S4HCON2023 Dumps Latest Practice Tests Dumps: https://drive.google.com/open?id=1D1hd-aQZnr2Td7cHYDo6pvVKGQws380k