Updated PDF (New 2025) Actual AVIXA CTS-D Exam Questions
Verified CTS-D Exam Dumps PDF [2025] Access using Fast2test
NEW QUESTION # 10
Technical end users are sometimes referred to as:
Response:
- A. Architects
- B. Clients
- C. Teachers
- D. Technology managers
Answer: D
NEW QUESTION # 11
In which phase does a project manager need to work with allied trades to create proper workspaces?
Response:
- A. Training phase
- B. Maintenance phase
- C. Installation phase
- D. Design phase
Answer: D
NEW QUESTION # 12
For a flat-floor auditorium with rows of staggered seats, evenly spaced for proper horizontal viewing, which row or rows will determine the preferred minimum height of the bottom of the image on a display at the front of the room?
[Collaborating With Other Professionals/Coordinate architectural/interior design criteria] Response:
- A. Rear three rows of the room
- B. Second row from the back of the room
- C. Ends of the back row of the room
- D. First three front rows of the room
Answer: A
NEW QUESTION # 13
Which is an important consideration for AV designers concerning a client's existing wireless network?
Response:
- A. Data security/encryption issues.
- B. Variable bandwidth dynamics issues.
- C. QoS could be minimized.
- D. Integration of POS equipment into the system.
Answer: A
NEW QUESTION # 14
What type of drawing is displayed below?
Response:
- A. Sectional block drawing
- B. Video system record drawings
- C. Conduit Riser diagram
- D. Equipment racks and wall plates
Answer: D
NEW QUESTION # 15
Twisted-pair cables offer protection from electromagnetic interference by __________.
Response:
- A. Comparing the signal that arrives at the destination device against a checksum
- B. Shielding each pair inside a foil or braided shield
- C. Physically separating conductors from higher-voltage signals
- D. Exposing each wire to the same outside interference, allowing it to be canceled at the input circuit
Answer: D
NEW QUESTION # 16
The first step when determining conduit capacity for cable should be to determine the:
Response:
- A. Wire dimensions exclusive of insulation multiplied by 3.1459
- B. Bend radius for all cables utilized in the installation
- C. Allowable fill percentage based upon local codes and regulations
- D. Cable resistance and multiply by a factor of 5
Answer: C
NEW QUESTION # 17
During the design phase of a project that has many network-enabled AV devices. What will the IT team need from the AV designer?
Response:
- A. Device serial numbers
- B. Device operating systems
- C. Device bandwidth requirements
- D. Device list of non-networked AV equipment
Answer: C
NEW QUESTION # 18
What is the required bandwidth for 4:4:4, progressive digital video signal (1920 × 1080, 8 bits at 30 Hz)?
Response:
- A. 2.60 Gbps
- B. 3.20 Gbps
- C. 1.49 Gbps
- D. 460.4 Mbps
Answer: C
NEW QUESTION # 19
The term Fast Ethernet refers to __________.
Response:
- A. 1 Gbps Ethernet
- B. 10 Gbps Ethernet
- C. 10 Mbps Ethernet
- D. 100 Mbps Ethernet
Answer: D
NEW QUESTION # 20
When producing shop drawings such as AV signal flow diagrams, what should be included?
Response:
- A. Descriptions of the video feed settings and relays
- B. Vendor details and specifications
- C. Details about the building infrastructure and electrical system
- D. Details of equipment configuration and interconnections
Answer: D
NEW QUESTION # 21
For measuring the light received at a particular location coming directly from a source, what measure and instrument should be used?
Response:
- A. Lux or foot candles with an incident meter
- B. Candela with an incident meter
- C. Foot Lambert with an STL
- D. Foot candle with a light impedance meter
Answer: A
NEW QUESTION # 22
How does one define project responsibilities and identify AV technology requirements?
Response:
- A. Consult with the owner as the project progresses
- B. The project manager will outline the responsibilities in the RFP
- C. Follow guidelines determined by state and local building codes
- D. Follow the project directory & program report
Answer: D
NEW QUESTION # 23
In a converged network, where 70 percent of the bandwidth capacity is available and 30 percent of the available capacity is available for streaming, what percentage of the network's rated capacity is available for streaming?
Response:
- A. 21 percent
- B. 50 percent
- C. 30 percent
- D. 70 percent
Answer: A
NEW QUESTION # 24
What are advantages to using digital signals over analog signals?
Response:
- A. All audio and video signal types can utilize a signal Category type cable.
- B. They are more forgiving to signal degradation over longer distances.
- C. The ability to carry more than one signal type at a time.
- D. They eliminate the need for distribution amplifiers or signal repeaters.
Answer: C
NEW QUESTION # 25
A client's security objectives can often be described with respect to the CIA triad. CIA stands for:
Response:
- A. Confidentiality, integrity, availability
- B. Communication, infrastructure, authorization
- C. Confidentiality, information, access
- D. Central Intelligence Agency
Answer: A
NEW QUESTION # 26
To transmit 4K video at 60 fps using HDMI 1.4, color information should be sampled at a rate of:
Response:
- A. 4:2:0
- B. 4:0:0
- C. 4:4:4
- D. 4:2:2
Answer: A
NEW QUESTION # 27
For light coming directly from a source such as a lightbulb, what measure and instrument should be used?
Response:
- A. Foot lambert with an STL
- B. Lux with an incident meter
- C. Footcandle with a light impedance meter
- D. Candela with an incident meter
Answer: D
NEW QUESTION # 28
People view objects more comfortably when the objects are located __________.
Response:
- A. Lower than their standard line of sight
- B. Higher than their standard line of sight
- C. To the right of their standard line of sight
- D. To the left of their standard line of sight
Answer: A
NEW QUESTION # 29
Circulation space is __________.
Response:
- A. The area around AV equipment that allows it to ventilate
- B. The space behind a rear-projection screen
- C. The area a person needs to turn around without disturbing other people
- D. The area below a lectern where AV sources are housed
Answer: C
NEW QUESTION # 30
What architectural document shows details about equipment mounting?
Response:
- A. Conduit riser diagrams
- B. Electrical coordination drawings
- C. Sectional block drawings
- D. Architectural drawings and notes
Answer: D
NEW QUESTION # 31
What unseen effect occurs when the reflected sound is within the integration interval-about 30 ms for speech and 50 ms or more for music?
Response:
- A. Echo
- B. Scattering of the sound throughout the venue
- C. An increase in loudness
- D. Amplitude modulation
Answer: C
NEW QUESTION # 32
A conference room is 40 ft. x 30 ft. and the ceiling is 10 ft. high. Ceiling loudspeakers will be used to cover the room for speech reinforcement with a target SPL level of 75 dB SPL.
The loudspeakers have a coverage circle diameter of 12 ft. and the spacing between loudspeakers is approximately 8.5 ft. Assuming the ceiling mounted loudspeakers are part of 70 V distributed system, what is the minimum size power amplifier that should be used?
Loudspeaker Sensitivity: 91 dB SPL @ 1 W / 1 m Transformer Taps available: 70 V: 60 W, 30 W, 15 W, 7.5 W 100 V: 60 W, 30 W, 15 W Response:
- A. 200 W
- B. 25 W
- C. 300 W
- D. 90 W
Answer: A
NEW QUESTION # 33
......
Try Best CTS-D Exam Questions from Training Expert Fast2test: https://www.fast2test.com/CTS-D-premium-file.html
Practice Examples and Dumps & Tips for 2025 Latest CTS-D Valid Tests Dumps: https://drive.google.com/open?id=1h9jWk8w7Gks_X-k5IZEknZmJ5KoavHed