Verified NS0-194 Exam Dumps PDF [2024] Access using Fast2test
Try Best NS0-194 Exam Questions from Training Expert Fast2test
NEW QUESTION # 99
You just set up a new clustered Data ONTAP 8.3 environment and want to monitor volume performance.
Which two commands or products would help you accomplish this task? (Choose two.)
- A. OnCommand Performance Manager
- B. OnCommand System Manager
- C. Syslog Serve
- D. Quality of Service (QoS) commands
Answer: B,C
NEW QUESTION # 100
The details from within Active IQ Cluster Viewer are downloadable in which three file formats? (Choose three.)
- A. PDF
- B. XLS
- C. DOC
- D. HTML
- E. CSV
Answer: A,B,E
NEW QUESTION # 101
When a node fails over to its partner, what enables the up node to handle the uncommitted write requests?
- A. NVRAM
- B. WAFL
- C. system memory
- D. cluster network
Answer: A
NEW QUESTION # 102
Your storage system has experienced a double-disk failure. When is this scenario considered to be in double-degraded mode?
- A. when two disks failed on a node
- B. when two disks failed on a single aggregate
- C. when two disks failed in a single RAID group
- D. when two disks failed on a single disk shelf
Answer: C
NEW QUESTION # 103
You have a FAS2240 system using Data ONTAP 8.2.1 7-Mode with CIFS share "cifs" on an NTFS security-style volume.
Which two permissions would be modified using Windows Explorer? (Choose two.)
- A. folder permissions
- B. file permissions
- C. cluster permissions
- D. share permissions
Answer: C,D
NEW QUESTION # 104
Which two transport protocols would be used for SnapDrive for Windows in both 7-Mode and clustered Data ONTAP environments? (Choose two.)
- A. HTTPS
- B. RPC
- C. HTTP
- D. iSCSI
Answer: A,D
NEW QUESTION # 105
Exhibit:
Which two steps would you perform to correct the problem shown in the exhibit? (Choose two.)
- A. Replace the shelf chassis.
- B. Reseat the power supplies.
- C. Reseat the shelf modules.
- D. Perform a takeover and giveback.
Answer: C,D
NEW QUESTION # 106
Referring to the exhibit.
A customer contacts you and asks for assistance in determining which ports can be used for a new broadcast domain on a clustered Data ONTAP 8.3.2 system.
The system is serving LUNs using the FC protocol and is in production.
However, for Ethernet traffic, it is not yet in production. The customer provides you the output of the network port show command.
Referring to the exhibit, which ports will be eligible to create a new broadcast domain without impacting production storage virtual machines (SVMs) serving FC LUNs?
- A. any port in the cluster broadcast domain on node1 and node2
- B. any port on model
- C. any port on node2
- D. any port in the Default broadcast domain on node1 and node2
Answer: D
NEW QUESTION # 107
Which two statements describe ONTAP NVRAM? (Choose two.)
- A. ONTAP NVRAM is used as write cache.
- B. ONTAP NVRAM stores uncommitted writes.
- C. ONTAP NVRAM is battery backed.
- D. ONTAP NVRAM is used as read cache.
Answer: A,B
NEW QUESTION # 108
You want to use the supported method to upgrade the ONTAP version of a Cloud Volumes ONTAP instance from ONTAP 9.5 to ONTAP 9.6.
In this scenario, which NetApp tool accomplishes this task?
- A. Cloud Insights
- B. ONTAP System Manager
- C. Cloud Manager
- D. Active IQ Unified Manager
Answer: B
Explanation:
Explanation/Reference: https://docs.netapp.com/us-en/occm/task_updating_ontap_cloud.html#suspending-snapmirror- transfers
NEW QUESTION # 109
On an AFF system, which three storage efficiencies are enabled by default? (Choose three.)
- A. encryption
- B. deduplication
- C. reallocation
- D. compaction
- E. compression
Answer: B,D,E
Explanation:
Explanation/Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-vsmg%2FGUID- C1E3029E-1514-4579-939B-67160E849632.html
NEW QUESTION # 110
You want to replicate all volumes of an SVM, including the SVM's configuration data, to another on an hourly schedule.
Which action should you perform to accomplish this task?
- A. Configure SyncMirror replication for the volumes with a relationships type of DP.
- B. Configure SVM disaster recovery between the two SVMs.
- C. Configure SyncMirror betweenthe two cluster
- D. Configure SnapMirror replication for the volumes with a relationship type of XDP.
Answer: B
NEW QUESTION # 111
You want to debug a network issue on a four-node clustered Data ONTAP cluster in a large NFS environment of more than 1,000 clients.
The connection from one client with IP address 10.11.12.13 accessing port e0c on controller NetApp1 resets every hour.
What is the correct way to collect a packet trace in this scenario?
- A. Issue the pktt start -d /etc/crash -i 10.11.12.13 command on the clustershell.
- B. Packet traces are collected automatically for all client connections in clustered Data ONTAP. You can find them in the /etc/crash directory on each node.
- C. Use System Manager to collect the packet trace for e0c on NetApp1 and client IP address 10.11.12.13.
- D. Issue the system node run -node NetApp1 -command "pktt start e0c -d /etc/crash -i 10.11.12.13" command.
Answer: C
NEW QUESTION # 112
A user is complaining of "Permission denied" errors when mounting a volume from a Data ONTAP 7-Mode storage controller. The export rule for the share is /vol/unix - sec=sys, rw=@mars :pluto.
Which three configuration files would you collect to verify how access is granted in this scenario? (Choose three.)
- A. /etc/netgroup
- B. /etc/hosts.equiv
- C. /etc/hosts
- D. /etc/nsswitch.conf
- E. /etc/Iclgroups.cfg
Answer: A,B,D
NEW QUESTION # 113
You have an ONTAP 9.3 cluster and create a new SnapMirror relationship with a SnapMirror type of DP. You initialization the SnapMirror relationship and verify that incremental updates are operating as expected.
However, you notice that the SnapMirror type is XDP instead of the specified DP.
In this scenario, which statement is correct?
- A. DP is not supported in ONTAP 9.3.
- B. The destination cluster is running an older version of ONTAP.
- C. All new relationships default to XDP.
- D. The SnapMirror policy type was set to MirrorAllSnapshots.
Answer: C
NEW QUESTION # 114
When you expend an aggregate, the space partition can be added as only a new RAID group, even though the current RAID group size is large enough for the current and new partitions.
In this scenario, which statement is correct?
- A. The partitions to be added share disks with the partition in the existing group.
- B. Only nonpartitioned disks can be added to RAID group with existing partitions.
- C. The aggregate must be converted to RAID-TEC to expand RAID groups using partitions.
- D. RAID group size is used only when dealing with non-partitioned disks.
Answer: A
NEW QUESTION # 115
You replaced the controller of an HA pair in a 4-node cluster running clustered Data ONTAP 8.3.1. You have gone through all hardware testing requirements before booting the system.
Which action is now required to boot the system successfully?
- A. Use the boot_ontap command from the loader prompt.
- B. Use the storage disk reassign -s <source system id> -d <destination system id> command from diagnostics mode.
- C. Use the disk reassign -s <souroe systemid> -d <destination systemid> command from maintenance mode.
- D. Use the storage disk reassign -s <source system id> -d <destination system id> command from the cluster shell.
Answer: A
NEW QUESTION # 116
A customer is installing a new system and has determined that they have a broken disk.
What information is required to open a NetApp Support case?
- A. disk HBA firmware and serial number
- B. disk shelf serial number and shelf ID number
- C. serial number or system ID
- D. mainboard rev. id
Answer: C
NEW QUESTION # 117
In clustered Data ONTAP, you just configured a new storage virtual machine (SVM) that SnapCenter Plug-in for Microsoft Windows needs to access to create Snapshot copies when running SnapManager for Microsoft Exchange Server.
However, when attempting to configure the SnapDrive transport protocol settings to communicate with the SVM, you receive the error shown in the exhibit.
Which three parameters are required in this scenario? (Choose three.)
- A. The SVM name is the same as the CIFS server name when CIFS is enabled.
- B. The SVM management LIF firewall policy is set to management.
- C. The role is set to cluster.
- D. The SVM name resolves to the management LIF's IP address.
- E. The data protocol is set to "none."
Answer: B,D
NEW QUESTION # 118
......
The NS0-194 certification exam is designed for IT professionals who have experience working with NetApp storage systems. It is ideal for storage administrators, support engineers, and technicians who want to upgrade their skills and knowledge in NetApp storage systems. NetApp Certified Support Engineer certification exam is also suitable for IT professionals who want to specialize in storage systems and work for organizations that use NetApp storage products.
The NS0-194 exam is an industry-recognized certification that validates the skills needed to support NetApp data storage solutions. It is ideal for IT professionals who work with NetApp storage systems and want to improve their knowledge and skills. NetApp Certified Support Engineer certification is also valuable for individuals who want to demonstrate their expertise to employers and clients, as it is a globally recognized certification.
Latest 100% Passing Guarantee - Brilliant NS0-194 Exam Questions PDF: https://www.fast2test.com/NS0-194-premium-file.html