View All VMCE_v12 Actual Free Exam Questions May 01, 2024 Updated [Q11-Q28]

View All VMCE_v12 Actual Free Exam Questions May 01, 2024 Updated

Pass Authentic Veeam VMCE_v12 with Free Practice Tests and Exam Dumps

NEW QUESTION # 11
An administrator is reviewing backup jobs and notices that backups of VMware VMs that are located on a SAN are taking longer than normal to back up. What could be a cause of this?

A. The backup repository needs to be changed to a Scale-out Backup Repository.
B. The backup proxy in use is failing over to Network mode.
C. The guest interaction proxy is failing over to data access mode.
D. The backup proxy in use is failing over to Virtual Appliance mode.

Answer: B

Explanation:
Explanation
When the backup proxy fails over to Network mode, it can impact the backup performance, especially for VMs located on a SAN. In Network mode, the backup traffic is transferred over the network rather than utilizing direct SAN access or VMware vStorage APIs for Data Protection (VADP). This can result in increased backup times due to the additional network overhead and slower data transfer rates.

NEW QUESTION # 12
On Monday, a backup administrator found out that some backup jobs were missing from a configuration. They want to roll back the configuration database to Friday's state. Which configuration restore mode should be used?

A. Restore
B. Veeam Explorer for Microsoft SQL
C. Instant SQL Recovery
D. Migrate

Answer: A

Explanation:
To roll back the configuration database to Friday's state, the backup administrator should use the 'Restore' mode available in Veeam Backup & Replication. This mode allows for the entire configuration backup to be restored, which includes the job settings and history, and brings the configuration database back to the state it was in at the time of the backup.References:
* Veeam Backup & Replication User Guide: Configuration Backup and Restore
* Veeam Help Center: Configuration Restore

NEW QUESTION # 13
Veeam ONE's ____________________ provides a single pane of glass view for all Veeam backup servers, proxies, and repositories in a backup infrastructure.

A. Data Protection View
B. Business View
C. System View
D. Infrastructure View

Answer: A

Explanation:
Explanation
https://helpcenter.veeam.com/docs/one/qsg/data_protection.html?ver=120
Veeam ONE's Data Protection View provides a single pane of glass view for all Veeam backup servers, proxies, and repositories in a backup infrastructure. This view allows you to monitor the overall state of the backup infrastructure, check the summary dashboards, view triggered alarms, check the latest job status, work with performance charts, and view the list of events1. The Data Protection View also includes information about Veeam Backup for Microsoft 365 jobs and protected data2. References:
Data Protection Monitoring - Veeam ONE Quick Start Guide
Veeam Backup for Microsoft 365 Data Protection - Veeam ONE Monitoring Guide Veeam Backup for Microsoft 365 Data Protection - Veeam ONE Monitoring Guide

Databases - Veeam ONE Monitoring Guide

NEW QUESTION # 14
Select the correct description of a synthetic full backup.

A. A synthetic full backup will generate a new VBK file by getting data from the hypervisor
B. A synthetic full backup will update the existing VBK with data from the hypervisor and generate a new VRB file
C. A synthetic full backup combines a VIB file with one or more VBK files from a repository to generate a new VBK file
D. A synthetic full backup combines a VBK file with one or more VIB files from a repository to generate a new VBK file

Answer: A

Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/hyperv/synthetic_full_backup.html?ver=100

NEW QUESTION # 15
A backup of a Windows VM running on a VMware cluster has been created. In which scenario can the Quick Rollback option be used during a Full VM Restore of the VM?

A. Migration of VM to Hyper-V host in the same data center
B. Issues caused by VM guest user error
C. Migration of VM to VMware host in a different data center
D. Issues caused by storage data corruption

Answer: B

Explanation:
The Quick Rollback feature can be used during a Full VM Restore to restore only the changed blocks of data since the last backup. This is typically used when the issues are minor and have been caused by VM guest user error, rather than full-scale data corruption or migrations to a different virtualization host. Quick Rollback can efficiently restore the VM to its previous state without the need to transfer the entire VM's data.References:
* Veeam Backup & Replication User Guide: Quick Rollback
* Veeam Help Center: Performing Quick Rollback

NEW QUESTION # 16
In the war against ransomware, a company decided to implement tape backup. The infrastructure contains Hyper-V VMs. What is the correct approach to getting all servers onto tape?

A. Create media sets, then create file to tape jobs.
B. Create media sets, then create backup to tape jobs.
C. Create media pools, then create file to tape jobs.
D. Create media pools, then create backup to tape jobs.

Answer: D

Explanation:
Explanation
Tape backup jobs in Veeam Backup & Replication are created using the "backup to tape" functionality. This allows you to copy backups from disk-based repositories to tape media for long-term retention. To implement this approach, you would first create media pools. Media pools are logical containers that group tape media together. They define the available tape resources and their usage. Media pools can be configured based on specific criteria, such as tape type or capacity.
https://helpcenter.veeam.com/docs/backup/vsphere/getting_started_with_tapes.html?ver=120

NEW QUESTION # 17
Figure A shows the backup files on a Scale-out Backup Repository (SOBR) created by a single Veeam backup job. The SOBR is configured to offload to capacity tier in move mode. If the offload was completed successfully, what will remain on the performance extents for the files uploaded to the capacity tier?

A. VBM files (metadata only)
B. VIB and VBK files (metadata only)
C. VIB and VBK files (data blocks only)
D. VBK files (metadata and data)
E. VIB files (metadata and data)

Answer: B

NEW QUESTION # 18
Veeam ONE has been installed and configured. The infrastructure contains five Veeam Backup & Replication servers. The administrator needs to check the remaining capacity on each of the backup repository servers.
Where can they see this information?

A. Under Data Protection View, look up the backup repository servers to see the remaining capacity
B. Under Infrastructure View, look up the backup repository servers to see the guest disk space.
C. Under Business View, look up the backup repository servers to see the remaining capacity.
D. Under Infrastructure View, look up the Veeam Backup & Replication servers to see the guest disk space.

Answer: A

Explanation:
In Veeam ONE, the remaining capacity of each backup repository server can be viewed under the Data Protection View. This section provides detailed information about the storage utilization and remaining capacity of backup repositories, allowing administrators to effectively monitor and manage storage resources.References:Veeam ONE User Guide, Veeam ONE Data Protection View Documentation

NEW QUESTION # 19
A file on a Linux VM hosted on Hyper-V is corrupted and must be restored. For some reason, the Veeam mount server cannot connect to the VM through the network. Which of the following restore methods provides the best possible RTO?

A. Run Veeam file restore wizard and use "copy to" to download the file locally in a shared folder.
B. Start a virtual lab and boot the Linux VM image in an application group, then copy the file directly from the image to the Linux VM.
C. It is impossible to restore the file on the VM if the mount server cannot reach it through the network.
D. Run Veeam file restore wizard and let it restore through PowerShell Direct.

Answer: A

NEW QUESTION # 20
Veeam ONE has been Installed and configured. It is necessary to monitor the three Veeam Backup & Replication servers in order to see how much backup storage is being used on the performance and capacity tiers of the backup repository server. How can this be achieved?

A. Add Mm* virtual infrastructure and look up (he backup repository server to see the guest disk space.
B. Add each Veeam Backup & Replication server and monitor storage usage through the Data Protection view.
C. Install the Veeam ONE Connector on each Veeam Backup & Replication server and the backup repository server. Approve the connection via the Data Protection View.
D. Add the three Veeam Backup & Replication servers and the backup repository server under Infrastructure view.

Answer: B

NEW QUESTION # 21
To view current information about the entire Veeam backup Infrastructure, including alarms and the status of jobs, use Veeam ONE'S___________________.

A. Data Protection View
B. Report View
C. Enterprise View
D. Business View

Answer: A

NEW QUESTION # 22
A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?

A. Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site
B. Configure a backup copy job in mirror mode, to a repository on the second site
C. Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site
D. Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site

Answer: B

Explanation:
Explanation
https://www.running-system.com/veeam-version-10-favorite-features-immediate-copy-mirroring/

NEW QUESTION # 23
An administrator is asked to change a backup copy job from periodic mode to immediate mode. How can this be accomplished?

A. Create a new copy job and delete the original job.
B. Modify the job settings on the proxy performing the copy job.
C. Enable immediate mode on the repository.
D. Edit the original job and select immediate copy mode from the job settings.

Answer: A

Explanation:
Explanation
https://forums.veeam.com/veeam-backup-replication-f2/backup-copy-mode-t64888.html

NEW QUESTION # 24
Which of the following are valid restore options for Microsoft Exchange server email items when using the Veeam Explorer for Microsoft Exchange? (Choose 2)

A. Save as a .zip file
B. Save message as text file
C. Save attachment as file
D. Save as a .pst file
E. Save as an .msg file

Answer: D,E

NEW QUESTION # 25
A backup of a Linux VM running on a VMware cluster has been created. In which scenario can the Quick Rollback option be used during a Full VM Restore of the VM?

A. Issues caused by host power outage
B. Issues caused by VM software update
C. Migration of VM to VMware host in a different data center
D. Migration of VM to Hyper-V host in same data center

Answer: B

NEW QUESTION # 26
The advanced installation scenario requires installing the Veeam ONE Server component (server part) on one machine and installing the Veeam ONE Web UI component (client part) on another machine.

A. True
B. False

Answer: A

NEW QUESTION # 27
which actions can be used to locate the exact extent of a scale-out backup repository containing a particular VM's backup data? Choose two options.