[Aug 15, 2022] Cisco 200-301 Real Exam Questions and Answers FREE [Q119-Q141]

[Aug 15, 2022] Cisco 200-301 Real Exam Questions and Answers FREE

Pass Cisco 200-301 Exam Info and Free Practice Test

NEW QUESTION 119
Refer to the exhibit.

After running the code in the exhibit, which step reduces the amount of data that the NETCONF server returns to the NETCONF client, to only the interface's configuration?

A. Create an XML filter as a string and pass it to get_config() method as an argument.
B. Use the JSON library to parse the data returned by the NETCONF server for the interface's configuration.
C. Create a JSON filter as a string and pass it to the get_config() method as an argument.
D. Use the Ixml library to parse the data returned by the NETCONF server for the interface's configuration.

Answer: B

NEW QUESTION 120
What must be considered when using 802:11 ta?

A. It is used in place of 802 11b/g when many nonoverlapping channels are required
B. It is chosen over 802 11b/g when a lower-cost solution is necessary
C. It is compatible with 802 lib- and 802 11-compliant wireless devices
D. It is susceptible to interference from 2 4 GHz devices such as microwave ovens.

Answer: C

NEW QUESTION 121
DRAG DROP

Answer:

Explanation:

NEW QUESTION 122
Which command can you enter to configure an IPV6 floating static route?

A. Router (config)# ipv6 route::/0 serail0/1
B. Router (config)# ipv6 route FE80:0202::/32 serail 0/1 201
C. Router (config)# ipv6 route static resolve default
D. Router (config)# ipv6 route FE80:0202::/32 serail 0/1 1

Answer: B

NEW QUESTION 123
An office has 8 floors with approximately 30-40 users per floor. What command must be configured on the router Switched Virtual Interface to use address space efficiently?

A. ip address 192.168.0.0 255.255.255.128
B. ip address 192.168.0.0 255.255.255.224
C. ip address 192.168.0.0 255.255.0.0
D. ip address 192.168.0.0 255.255.254.0

Answer: D

Explanation:
Section: Network Fundamentals

NEW QUESTION 124
Drag and drop the network protocols from the left onto the correct transport services on the right.

Answer:

Explanation:

NEW QUESTION 125
Drag and drop the QoS terms from the left onto the descriptions on the right.

Answer:

Explanation:

NEW QUESTION 126

Refer to the exhibit. An engineer must add a subnet for a new office that will add 20 users to the network.
Which IPv4 network and subnet mask combination does the engineer assign to minimize wasting addresses?

A. 10.10.225.48 255.255.255.224
B. 10.10.225.32 255.255.255.240
C. 10.10.225.48 255.255.255.240
D. 10.10.225.32 255.255.255.224

Answer: D

NEW QUESTION 127
Drag and drop the AAA functions from the left onto the correct AAA services on the right

Answer:

Explanation:

NEW QUESTION 128
Refer to the exhibit.

Which password must an engineer use to enter the enable mode?

A. testing 1234
B. default
C. adminadmin123
D. cisco123

Answer: A

Explanation:
Explanation
If neither the enable password command nor the enable secret command is configured, and if there is a line password configured for the console, the console line password serves as the enable password for all VTY sessions -> The "enable secret" will be used first if available, then "enable password" and line password.

NEW QUESTION 129
Refer to the exhibit.

An access list is required to permit traffic from any host on interface G0/0 and deny traffic from interface G/0/1. Which access list must be applied?

A. Option A
B. Option C
C. Option B
D. Option D

Answer: A

NEW QUESTION 130
Drag and drop the descriptions of AAA services from the left onto the corresponding services on the right.

Answer:

Explanation:

NEW QUESTION 131
Which device permits or denies network traffic based on a set of rules?

A. switch
B. access point
C. firewall
D. wireless controller

Answer: C

NEW QUESTION 132
Refer to the exhibit.

A packet is being sent across router R1 to host 172.16.0.14. What is the destination route for the packet?

A. 209.165.200.246 via Serial0/1/0
B. 209.165.200.250 via Serial0/0/0
C. 209.165.200.254 via Serial0/0/0
D. 209.165.200.254 via Serial0/0/1

Answer: A

NEW QUESTION 133
Refer to the exhibit.

A network engineer must block access for all computers on VLAN 20 to the web server via HTTP All other computers must be able to access the web server Which configuration when applied to switch A accomplishes this task?

A. Option B
B. Option A
C. Option C
D. Option D

Answer: A

NEW QUESTION 134
Drag and drop the characteristics of network architectures from the left onto the type of architecture on the right.

Answer:

Explanation:

NEW QUESTION 135
Refer to the exhibit.

Which switch becomes the root bridge?

A. S2
B. S4
C. S3
D. S1

Answer: D

NEW QUESTION 136
Which output displays a JSON data representation?

A. Option A
B. Option D
JSON data is written as name/value pairs. A name/value pair consists of a field name (in double quotes), followed by a colon, followed by a value: "name":"Mark" JSON can use arrays. Array values must be of type string, number, object, array, boolean or null. For example: { "name":"John", "age":30, "cars":[ "Ford", "BMW", "Fiat" ] } JSON can have empty object like "taskId":{}
C. Option B
D. Option C

Answer: D

NEW QUESTION 137
Refer to the exhibit. When running EIGRP, what is required for RouterA to exchange routing updates with RouterC?

A. The no auto-summary command is needed on Router A and Router C
B. Router B needs to have two network statements, one for each connected network
C. Loopback interfaces must be configured so a DR is elected
D. AS numbers must be changed to match on all the routers

Answer: D

Explanation:
This question is to examine the understanding of the interaction between EIGRP routers. The following information must be matched so as to create neighborhood. EIGRP routers to establish, must match the following information:
1. AS Number;
2. K value.

NEW QUESTION 138
Drag and drop the attack-mitigation techniques from the left onto the Types of attack that they mitigate on the right.

Answer:

Explanation:

NEW QUESTION 139
A network engineer must back up 20 network router configurations globally within a customer environment.
Which protocol allows the engineer to perform this function using the Cisco IOS MIB?

A. SNMP
B. ARP
C. CDP
D. SMTP

Answer: A

NEW QUESTION 140
Drag and Drop Question
Drag and drop the Cisco Wireless LAN Controller security settings from the left onto the correct security mechanism categories on the right.
Select and Place:

Answer:

Explanation:

Explanation:
Layer 2 Security Mechanism includes WPA+WPA2, 802.1X, Static WEP, CKIP while Layer 3 Security Mechanisms (for WLAN) includes IPSec, VPN Pass-Through, Web Passthrough ...
Reference: https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/106082-wlc-compatibility-matrix.html