Free 300-820 braindumps download (300-820 exam dumps Free Updated Oct 23, 2021) [Q22-Q40]

Share

Free 300-820 braindumps download (300-820 exam dumps Free Updated Oct 23, 2021)

300-820 Dumps for Pass Guaranteed - Pass 300-820 Exam 2021


Official Training Course

Follow up the topic introduction with a comprehensive course administered by Cisco. This training comes in two delivery options, either a physical classroom with hands-on labs or e-learning. Both run for 5 days, with a specific audience targeted for collaboration administrators and collaboration engineers.

The course outline is very exhaustive and well-thought-out to provide you with the most relevant knowledge needed for your upcoming exam as well as your job role. Its main objective is to provide quality learning through blow-by-blow discussion and lab practices. Completing this program shapes your skills in Cisco Unified CM, together with Cisco Expressway, their configuration, and additional features. Subsequently, lectures acquaint you with troubleshooting of collaboration solutions and security of B2B communication. Also, using Cisco Collaboration, you gain proficiency in B2B calls.

Another key part of the course is Cisco’s Mobile and Remote Access (MRA). At this point, there will be an all-inclusive explanation of important skills, specifically in designing, troubleshooting, integrating, and securing MRA features. Some of the primary aspects that are deliberated include Cisco Instant Messaging and Presence and Cisco Unity Connection. Concluding the discussion are Cisco Webex Hybrid Services.

With the combination of lectures and labs, you get the upper hand with your test preparation. It readily highlights your knowledge of leveraging collaborative technologies for the accessibility of work supports such as content, voice, video, and remote workloads. And considering the weight and extensiveness of the course, there are certain prerequisites that needed to be cleared beforehand. First of all, it’s imperative to have a solid background in networking technologies, predominantly in voice and video. Unerring comprehension of basic Cisco collaboration solutions and Cisco Unified Communications Manager call control fundamentals is also a must. Lastly, you should already be familiar with vital signaling protocols like XMPP and SIP. If you think your contextual grasp is not enough, it’s advisable that you take the associated courses. These are “Understanding Cisco Collaboration Foundations” and “Implementing and Operating Cisco Collaboration Core Technologies”.

NEW QUESTION 22
Refer to the exhibit.

Cisco Unified Communications Manager routes the call via the Webex Meetings route list and route group to the Video Mesh cluster Node#1 in the Video Mesh cluster is hosting the meeting and has reached full capacity, but other nodes in the cluster still have spare capacity.
What happens to the participant's call?

  • A. The call fails.
  • B. Another node in the cluster is used and an intra-cluster cascade between Webex and the new Video Mesh node is formed.
  • C. The call is queued.
  • D. Another node in the cluster is used and an intra-cluster cascade between the two Video Mesh nodes is formed.

Answer: B

 

NEW QUESTION 23
An organization with a domain name of example.com.
Which two SRV records are valid for a SIP and H.323 communication? (Choose two.)

  • A. _sips._udp.example.com
  • B. _h323ls._udp.example com
  • C. _h323ls._tcp.example.com
  • D. _sips._tcp.example.com
  • E. _collab-edge._tls.example.com

Answer: B,D

Explanation:
Explanation
https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-1/Cisco-Expressway-

 

NEW QUESTION 24
Refer to the exhibit.

An ISDN gateway is registered to Expressway-C with a prefix of 9 and/or it has a neighbor zone specified that routes calls starting with a 9.
Which value should be entered into the "Source" field to prevent toll fraud regardless at origin of the call?

  • A. Any
  • B. Traversal Zone
  • C. Neighbor Zone
  • D. All

Answer: A

 

NEW QUESTION 25
What is a key configuration requirement for Hybrid Message Service High Availability deployment with multiple IM and Presence clusters?

  • A. You must have the Intercluster Lookup Service working across all of your IM and Presence clusters.
  • B. Your IM and Presence Service clusters must have Multiple Device Messaging disabled.
  • C. You must have the Intercluster Sync Agent working across your IM and Presence clusters.
  • D. AXL service should be activated only on the publisher of each IM and Presence cluster.

Answer: C

 

NEW QUESTION 26
What it is the purpose of using ICE for Mobile and Remote Access endpoints in the Cisco Collaboration infrastructure?

  • A. ICE uses FAST updates to optimize the video quality in case of packet loss. This technology is available only from Cisco Unified CM version 11.5 and later.
  • B. ICE controls the bandwidth usage for Cisco Collaboration endpoints if the endpoints are located outside the company network.
  • C. ICE enablement allows for the Cisco Collaboration endpoint to register through Expressway servers to Cisco Unified Communications Manager behind a firewall.
  • D. ICE enables Cisco Collaboration endpoints to determine if there is direct connectivity between them.

Answer: D

 

NEW QUESTION 27
What should an engineer use to create users for a Cisco Jabber Cloud Deployment?

  • A. Cisco Webex Directory Connector
  • B. Cisco Unified IM and Presence Server
  • C. Cisco Webex Administration Tool
  • D. Cisco UCM

Answer: C

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/12_6/cjab_b_cloud-and-hybrid-deploymentscisco-jabber-12-6/cjab_b_cloud-and-hybrid-deployments-cisco-jabber-12-6_chapter_0101.html

 

NEW QUESTION 28
Refer to the exhibit. The administrator attempted to log in, but Jabber clients cannot log in via mobile and remote access. How is this issue resolved?

  • A. The domain pod1.local must be deprovisioned from the Webex cloud for Jabber logins.
  • B. Skype for Business mode must be disabled on the DNS server because it conflicts with Jabber login requirements.
  • C. The username [email protected] is invalid. The user should instead sign-in simply as jabberuser.
  • D. A DNS SRV record must be created for _collab-edge._tls.pod1.local that points to the Expressway-E.

Answer: D

 

NEW QUESTION 29
Which step is required when configuring Cisco Webex Hybrid Message Service?

  • A. Add Expressway-C and Cisco United CM to the Cisco Webex Cloud.
  • B. Register Expressway-C to Cisco Unified Communications Manager.cisco
  • C. Add Cisco Unity Connection to Expressway-E.
  • D. Register Expressway-C Connector Hosts to the Cisco Webex Cloud.

Answer: D

Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cloudCollaboration/spark/hybridservices/messageservice

 

NEW QUESTION 30
Which role does Call Policy play when preventing toll fraud on Expressways?

  • A. It changes the audio codec used in a call through Expressways.
  • B. It controls which calls are allowed, which calls are rejected, and which calls are redirected to a different destination.
  • C. It changes the calling and called number on a call.
  • D. It changes the audio protocol used by a call through Expressways.

Answer: B

 

NEW QUESTION 31
An external Jabber device cannot register. While troubleshooting this issue, the engineer discovers that privately signed certificates are being used on Expressway-C and Expressway-E What action will resolve this issue?

  • A. The Jabber client must register to the Cisco UCM internally before it will register externally.
  • B. The private CA certificate must be placed in the phone trust store.
  • C. The device running the Jabber client must use a VPN to register.
  • D. The device running the Jabber client must download and trust the private CA certificate.

Answer: D

 

NEW QUESTION 32
When configuring a Cisco Expressway solution and need to design the dial plan with various rules for URIs and numbers coming through the device. To do so, it is important that some dial plan rules are applied in a certain order. When configuring the transform section, you must know the range of the priorities.
Which range is correct?

  • A. any number between 1-128
  • B. any number in the dialog box
  • C. any number in the drop-down menu
  • D. any number between 1-65534

Answer: D

 

NEW QUESTION 33
Refer to the exhibit.

When configuring a search rule that routes calls to a zone, what occurs when 13358 is dialed?

  • A. 13358 is replaced by 135, and then is sent to the traversal zone.
  • B. 13358 is replaced by 135, and then is sent to the local zone.
  • C. 13358 is sent directly to the traversal zone.
  • D. 13358 is replaced by 135 and remains in the same zone.

Answer: C

 

NEW QUESTION 34
What are two reasons why port 8443 is unreachable from the Internet to the Expressway-E? (Choose two.)

  • A. The MRA license is missing on the Expressway-E.
  • B. The Unified Communications zone is down.
  • C. The SRV record for _cisco-uds is misconfigured.
  • D. Transform is not configured on Expressway-E.
  • E. The firewall is blocking the port.

Answer: C,E

 

NEW QUESTION 35
Refer to the exhibit.

A new neighbor zone is added for a new Cisco Meeting Server, but the zone is showing a SIP status of failed from the time the zone it was created. What should be done to resolve this issue?

  • A. The underlying DNS issue must be resolved
  • B. More bandwidth must be added to the appropriate pipes
  • C. The existing zone using ID 7 must be deleted
  • D. The search rule must be changed to continue on match

Answer: D

 

NEW QUESTION 36
Refer to the exhibit. Logins and failing via mobile and remote access. How is this resolved?

  • A. Although a traversal client zone exists, there is no Unified Communications traversal client zone. One must be created.
  • B. Mobile and remote access login has not been enabled for the domain configured in the Expressway-C. The domain must be edited to allow Cisco UCM registrations.
  • C. SIP is disabled on the Expressway-E. The SIP protocol must be enabled on the server.
  • D. No Cisco UCM servers are configured in the Expressway-C. Servers must be added for CallManager and IM and Presence services.

Answer: D

 

NEW QUESTION 37
Which part of a hybrid cloud-based deployment with Cisco Webex Messenger Service is used for meeting capabilities?

  • A. Cisco Unified CM is always used for meeting capabilities.
  • B. Cisco Webex Meeting Center is always used for meeting capabilities.
  • C. Depending on the media flow, the Webex Meeting Center or local Cisco Unified CM meeting resources are used for meeting capabilities.
  • D. Depending on the origin of the user, the Webex Meeting Center or local Cisco Unified Communications Manager meeting resources are used for meeting capabilities.

Answer: D

 

NEW QUESTION 38
Which dial plan component is configured in Expressway-C to route a call to the Cisco UCM?

  • A. search rule
  • B. call policy
  • C. traversal subzone
  • D. call routing

Answer: D

Explanation:
Reference:
https://cmslab.ciscolive.com/pod8/cucm/expctrunk

 

NEW QUESTION 39
Which configuration is required when implementing Mobile and Remote Access on Cisco Expressway?

  • A. Cisco Unified CM publisher address
  • B. IPS
  • C. SSO
  • D. SAML authentication

Answer: A

 

NEW QUESTION 40
......


Cisco 300-820 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Configure Toll Fraud Prevention On Expressway Series (No Custom CPL Scripts)
  • Initial Expressway Configurations
Topic 2
  • Unified Communications Traversal Zones
  • Mobile And Remote Access
  • Cisco Webex Technologies
Topic 3
  • SIP Trunk Integration With Cisco Unified Communications Manager
  • Describe SIP Media Encryption Mode
Topic 4
  • Configure A Business To Business (B2B) Collaboration Solution
  • Configure Key Expressway Settings
Topic 5
  • Configure Expressway Core Dial Plan Elements
  • Unified Communications Configuration On Expressway
Topic 6
  • SIP Trunk Integration With Cisco Unified Communications Manager
  • Describe SIP Media Encryption Mode
Topic 7
  • Configure Expressway Core Dial Plan Elements
  • Unified Communications Configuration On Expressway
Topic 8
  • Describe The Signaling And Media Flows Used In A Cisco Webex Video Mesh Deployment
  • SIP Trunk Security Profile On Cisco Unified Communications Manager
Topic 9
  • Configure Toll Fraud Prevention On Expressway Series (No Custom CPL Scripts)
  • Initial Expressway Configurations
Topic 10
  • SIP Trunk Integration With Cisco Unified Communications Manager
  • Describe Key Expressway Settings
Topic 11
  • Troubleshoot A Business To Business (B2B) Collaboration Solution
  • Describe Protocol Interworking On The Expressway
Topic 12
  • Unified Communications Configuration On Expressway
  • Describe Expressway Core Dial Plan Elements
Topic 13
  • Unified Communications Configuration On Expressway
  • Describe Expressway Core Dial Plan Elements
Topic 14
  • Describe Expressway Backup And Restore Procedure (Stand Alone And Cluster)
  • Configure Webex Hybrid Services/Connector
Topic 15
  • SIP Trunk Integration With Cisco Unified Communications Manager
  • Describe Key Expressway Settings
Topic 16
  • Configure A Mobile And Remote Access (MRA) Solution
  • Describe Expressway Media Traversal
Topic 17
  • Troubleshoot A Mobile And Remote Access (MRA) Solution
  • Describe The Complications Of NAT In A Collaboration Environment
Topic 18
  • Configure A Business To Business (B2B) Collaboration Solution
  • Configure Key Expressway Settings
Topic 19
  • Describe Cisco Jabber For Cloud And Hybrid Deployments Describe Expressway Backup And Restore Procedure (Stand Alone And Cluster)
  • Configure Webex Hybrid Services/Connector
Topic 20
  • Describe Cisco Jabber For Cloud And Hybrid Deployments With Cisco Webex Messenger
  • Describe Expressway Licensing
Topic 21
  • IP Trunk Security Profile On Cisco Unified Communications Manager
  • Describe The Purpose Of ICE, TURN And STUN
Topic 22
  • IP Trunk Security Profile On Cisco Unified Communications Manager
  • Describe The Purpose Of ICE, TURN And STUN
Topic 23
  • Describe The Signaling And Media Flows Used In A Cisco Webex Video Mesh Deployment
  • SIP Trunk Security Profile On Cisco Unified Communications Manager
Topic 24
  • Troubleshoot A Mobile And Remote Access (MRA) Solution
  • Describe The Complications Of NAT In A Collaboration Environment
Topic 25
  • Troubleshoot A Business To Business (B2B) Collaboration Solution
  • Describe Protocol Interworking On The Expressway
Topic 26
  • With Cisco Webex Messenger
  • Describe Expressway Licensing
Topic 28
  • Unified Communications Traversal Zones
  • Mobile And Remote Access
  • Cisco Webex Technologies
Topic 29
  • Configure A Mobile And Remote Access (MRA) Solution
  • Describe Expressway Media Traversal


Here is Cisco 300-820 Exam

This exam assesses your experience of cooperating in cloud and edge solutions, consisting of: Cisco Unified Instant Messaging and Presence, Road configurations,Cisco Webex teams intersect as do emerging technologies.Comprehension and also the skills you need to have for this exam: Understanding of modern network technologies ,Understanding of voice and video clips ,Proficiency in Cisco Core Partnership Technologies , Login Method (SIP) and also Extensible Messaging and Existence Procedure (XMPP) Signaling Method Basics, Call Control Basics Working with Cisco Unified Communications Supervisor.

Verified 300-820 dumps Q&As - Pass Guarantee Exam Dumps Test Engine: https://www.fast2test.com/300-820-premium-file.html

Verified 300-820 dumps and 98 unique questions: https://drive.google.com/open?id=1G0l4rlJ072Wt2ZpiudkwNABseqm4YeGW

Contact Us

If you have any question please leave me your email address, we will reply and send email to you in 12 hours.

Our Working Time: ( GMT 0:00-15:00 ) From Monday to Saturday

Support: Contact now 

日本語 Deutsch 繁体中文 한국어