Get ready to pass the 156-585 Exam right now using our CCTE Exam Package
A fully updated 2021 156-585 Exam Dumps exam guide from training expert Fast2test
NEW QUESTION 34
If the cpsemd process of SmartEvent has crashed or is having trouble coming up. then it usually indicates that___________.
- A. The logged in administrator does not have permissions to run SmartEvent
- B. The SmartEvent core on the Solr mdexer has been deleted
- C. Postgres database ts down
- D. Cpd daemon is unable to connect to the log server
Answer: B
NEW QUESTION 35
Select the technology that does the following actions
- provides reassembly via streaming for TCP
- handles packet reordering and congestion
- handles payload overlap
- provides consistent stream of data to protocol parsers
- A. Context Management
- B. Pre-Protocol Parser
- C. fwtcpstream
- D. Passive Streaming Library
Answer: D
NEW QUESTION 36
John has renewed his NGTX License but he gets an error (contract for Anti-Bot expired). He wants to check the subscription status on the CU of the gateway, what command can he use for this?
- A. show license status
- B. cpstat antimalware -I subscription _status
- C. fwm lie print
- D. fw monitor license status
Answer: A
NEW QUESTION 37
Which command can be run in Expert mode lo verify the core dump settings?
- A. grep SFWDlR/config/db/initial
- B. cat /etc/sysconfig/coredump/cdm conf
- C. grep cdm /config/db/coredump
- D. grep cdm /config/db/initial
Answer: A
NEW QUESTION 38
What acceleration mode utlizes multi-core processing to assist with traffic processing?
- A. Traffic Warping
- B. SecureXL
- C. HyperThreading
- D. CoreXL
Answer: C
NEW QUESTION 39
What is the name of the VPN kernel process?
- A. FWK
- B. CVPND
- C. VPNK
- D. VPND
Answer: C
NEW QUESTION 40
Check Point Threat Prevention policies can contain multiple policy layers and each layer consists of its own Rule Base Which Threat Prevention daemon is used for Anti-virus?
- A. in emaild
- B. ctasd
- C. in.msd
- D. in.emaild.mta
Answer: A
NEW QUESTION 41
Which of the following is NOT a valid "fwaccel" parameter?
- A. packets
- B. stats
- C. stat
- D. templates
Answer: A
NEW QUESTION 42
Which process is responsible for the generation of certificates?
- A. dbsync
- B. cpm
- C. cpca
- D. fwm
Answer: C
NEW QUESTION 43
Which Daemon should be debugged for HTTPS Inspection related issues?
- A. WSTLSO
- B. HTTPD
- C. FWD
- D. VPND
Answer: A
NEW QUESTION 44
What command is usually used for general firewall kernel debugging andwhatis the sizeofthe buffer that isautomaticallyenabled whenusingthe command?
- A. fw ctl debug, buffer sizeis 1024 KB
- B. fw ctl kdeoug. buffer sizeis 32000 KB
- C. fw dl zdebug, buffer size is 1 MB
- D. fw ell zdebug. buffer size is 32768 KB
Answer: B
NEW QUESTION 45
Troubleshooting issues with Mobile Access requires the following:
- A. Standard VPN debugs and packet captures on Security Gateway, debugs of "cvpnd' process on Security Management
- B. Debug logs of FWD captured with the command - 'fw debug fwd on
TDERROR_MOBILE_ACCESS=5' - C. 'ma_vpnd' process on Secunty Gateway
- D. Standard VPN debugs, packet captures, and debugs of cvpnd' process on Security Gateway
Answer: D
NEW QUESTION 46
What is NOT a benefit of the fw ctl zdebug command?
- A. Cannot be used to debug additional modules
- B. Automatically allocate a 1MB buffer
- C. Collect debug messages from the kernel
- D. Clean the buffer
Answer: A
NEW QUESTION 47
What does CMI stand for in relation to the Access Control Policy?
- A. Context Management Infrastructure
- B. Context Manipulation Interface
- C. Content Matching Infrastructure
- D. Content Management Interface
Answer: A
NEW QUESTION 48
VPN's allow traffic to pass through the Internet securely byencryptingthe traffic as it enters the VPN tunnel and then decrypting the exists. Which process is responsible for Mobile VPN connections?
- A. cvpnd
- B. fwk
- C. vpnk
- D. vpnd
Answer: C
NEW QUESTION 49
During firewall kernel debug with fw ctl zdebug you received less information than expected. You noticed that a lot of messages were lost since the time the debug was started. What should you do to resolve this issue?
- A. Redirect debug output to file; Use fw ctl zdebug -o ./debug.elg
- B. Redirect debug output to file; Use fw ctl debug -o ./debug.elg
- C. Increase debug buffer; Use fw ctl debug -buf 32768
- D. Increase debug buffer; Use fw ctl zdebug -buf 32768
Answer: C
NEW QUESTION 50
What file extension should be used with fw monitor to allow the output file to be imported and read in Wireshark?
- A. .pcap
- B. .exe
- C. .tgz
- D. .cap
Answer: D
NEW QUESTION 51
If IPS protections that prevent SecureXL from accelerating traffic, such as Network Quota, Fingerprint Scrambling. TTL Masking etc, have to be used, what is a recommended practice to enhance the performance of the gateway?
- A. Disable SecureXL and use CoreXL
- B. Use the IPS exception mechanism
- C. Disable all such protections
- D. Upgrade the hardware to include more Cores and Memory
Answer: A
NEW QUESTION 52
What is the kernel process for Content Awareness that collects the data from the contexts received from the CMI and decides if the file is matched by a data type?
- A. dlpda
- B. cntawmod
- C. cntmgr
- D. dlpu
Answer: B
NEW QUESTION 53
Which Threat Prevention daemon is the core Threat Emulator, engine and responsible for emulation files and communications with Threat Cloud?
- A. inmsd
- B. ctasd
- C. scrub
- D. ted
Answer: D
Explanation:
Explanation
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=
NEW QUESTION 54
You are upgrading your NOC Firewall (on a Check Point Appliance) from R77 to R80 30 but you did not touch thesecuritypolicy After the upgrade you can't connect to the new R80 30 SmartConsole of the upgraded Firewall anymore What is a possible reason for this?
- A. the IPS System on the new R80.30 Version prohibits direct Smartconsole access to a standalone firewall
- B. the license became invalig and the firewall does not start anymore
- C. the upgrade process changed the interfaces and IP adresses and you have to switch cables
- D. new new console port is 19009 and a access rule ts missing
Answer: A
NEW QUESTION 55
If you run the command "fw monitor -e accept src=10.1.1.201 or src=172.21.101.10 or src=192.0.2.10;" from the cli sh What will be captured?
- A. Packets destined to 172 21 101 10 from 10.1.1.101
- B. fw monitor only works in expert mode so no packets will be captured
- C. Only packet going to 192.0.2.10
- D. Packets from 10 1 1 201 going to 192.0 2.10
Answer: C
NEW QUESTION 56
Where will the usermode core files be located?
- A. SCPDIR/var/log/dump/usermode
- B. /var/log/dump/usermode
- C. SFWDlR/var'log/dump/usermode
- D. /var/suroot
Answer: B
NEW QUESTION 57
Check Point's PostgreSQL is partitioned into several relational database domains. Which domain contains network objects and security policies?
- A. System Domain
- B. Global Domain
- C. User Domain
- D. Log Domain
Answer: B
NEW QUESTION 58
......
Master 2021 Latest The Questions CCTE and Pass 156-585 Real Exam!: https://www.fast2test.com/156-585-premium-file.html
Practice To 156-585 - Fast2test Remarkable Practice On your Check Point Certified Troubleshooting Expert Exam: https://drive.google.com/open?id=1fqMm_j8-T78H0wyS6-YojxX1XhAiYq_Y