HP HPE7-A04 Certification Exam Dumps with 100 Practice Test Questions
New HPE7-A04 Exam Dumps with High Passing Rate
HP HPE7-A04 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 56
What is true about the VSX switches in EVPN VXLAN?
- A. Each member of the VSX acts as standalone from the EVPN VXLAN perspective
- B. You should make the two switches in the VSX pair operate as a single logical VTEP
- C. VSX stacking and EVPN VXLAN are mutually exclusive
Answer: B
NEW QUESTION # 57
In preparation for the deployment, what statement is correct from the below?
- A. It is best if you migrate Layer 2 functionality (e.g., VLAN tagging on uplinks) and Layer 3 function (e.
g., default gateways) simultaneously - B. If you have spent good time on your design, there is no need to have any rollback plan
- C. It is not best practice to build the new network in parallel to the existing network
- D. Migrate Layer 2 functionality (e.g., VLAN tagging on uplinks) then cut over to Layer 3 function (e.g., default gateways)
Answer: D
NEW QUESTION # 58
What can be exported using IRIS?
- A. Detailed routing configurations of all devices
- B. Bill Of Material
- C. Devices' quick specs
- D. Devices' Data Sheets
Answer: B
NEW QUESTION # 59
Which of the following CX switches support VSF stacking technology?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 60
You want to configure your border leaf switches to leak routes between an overlay VRF named "dc1" and a VRF named "campus," which connects to the campus core. You also want to leak routes between an overlay VRF named "dc2" and the campus VRF. "dc1" should not be able to communicate with "dc2." Which is a valid design for the VRFs' IPv4 route-targets?
- A. vrf dc1, import = 1:1, export = 1:1; vrf dc2, import = 1:2, export = 1:2; vrf campus, import = 1:1, 1:2, 1:
99, export = 1:99 - B. vrf dc1, import = 1:1, export = 1:1; vrf dc2, import = 1:1, export = 1:1; vrf campus, import = 1:1, export
= 1:99 - C. vrf dc1, import = 1:99, export = 1:1; vrf dc2, import = 1:99, export = 1:2; vrf campus, import = 1:1, 1:2 export = 1:99
- D. vrf dc1, import = 1:1, export = 1:99; vrf dc2, import = 1:2, export = 1:99; vrf campus, import = 1:99, export = 1:1, 1:2
Answer: C
NEW QUESTION # 61
In a multi-AS underlay design
- A. All spine and leaf switches are in one AS and the border leaf is in separate AS
- B. Every spine and every leaf is in their own AS
- C. All spine switches are in the same AS while each leaf (VSX pair if used) are in their own AS
- D. Every spine is in their own AS while all leaf switches in one AS
Answer: C
NEW QUESTION # 62
When collecting information about the Power in your Data Center design you need to take into account (Select two)
- A. The type of the voltage DC or AC
- B. What voltage is used
- C. The direction of the airflow
- D. The fiber strands that are needed to support the TOR switches
Answer: A,B
NEW QUESTION # 63
If you need to demo the proposed solution you should only use certified Aruba demo portal only
- A. True
- B. False
Answer: B
NEW QUESTION # 64
In L3 Spine and Leaf design, which answer is correct?
- A. Leaf switches connect to other leaf switches
- B. Leaf switches connect to only one spine switch
- C. Each leaf switch connects to each spine switch
- D. Each spine switch connects to all other spine switches in a full mesh
Answer: C
NEW QUESTION # 65
Which switch model is able to perform microsegmentation?
- A. CX 8400
- B. CX 6400
- C. CX 10000
- D. CX 8360
- E. CX 8325
Answer: C
NEW QUESTION # 66
What is the maximum distance supported by Active Optical Cables (AOC)?
- A. 50 meters
- B. 7 meters
- C. 30 meters
- D. 15 meters
Answer: A
NEW QUESTION # 67
Loopback addresses are very useful for troubleshooting and for device management. What is true about the loopback interfaces?
- A. Not required for EVPN VXLAN
- B. They need to be advertised for underlay connectivity when using OSPF
- C. Not required for underlay connectivity using OSPF
- D. Should be avoided if NSX is used as an overlay
Answer: C
NEW QUESTION # 68
What can be used to encrypt data in flight between untrusted locations?
- A. OSPF authentication
- B. MACSec
- C. GRE tunnels
- D. MD5 encryption
Answer: B
NEW QUESTION # 69
Which switch model has the following specifications:
* 32 ports of 100GbE, 200GbE, or 400GbE
* 400 Gbps ports can be configured as 4x100GbE, 2x200GbE, or 1x400GbE
- A. CX 8360v2 Switch Series
- B. CX 8100 Switch Series
- C. CX 8325 Switch Series
- D. CX 9300 Switch Series
Answer: D
NEW QUESTION # 70
You are planning to use distributed routing for overlay subnets in an EVPN VXLAN fabric. The customer needs to provide DHCP addresses to some VMs in the tenant-a VRF. The DHCP server is in the shared VRF.
What is one step you should take?
- A. On each VTEP switch, create a loopback interface in the tenant-a VRF with a different IP on both switches in a VSX pair
- B. For every SVI, assign a unique actual IP address, different from the active gateway IP address
- C. Change the design to use centralized routing because HPE Aruba CX switches cannot support DHCP relay with distributed routing
- D. On each VTEP switch, create a loopback interface in the shared VRF with the same IP on bothswitches in a VSX pair
Answer: D
NEW QUESTION # 71
In defining availability requirements for applications and services, the applications that directly impact health and safety are called
- A. Life-Critical Applications
- B. Team-Critical Applications
- C. Business-Critical Applications
- D. Mission-Critical Applications
Answer: A
NEW QUESTION # 72
......
Get HPE7-A04 Braindumps & HPE7-A04 Real Exam Questions: https://www.fast2test.com/HPE7-A04-premium-file.html
HP HPE7-A04 Actual Questions and Braindumps: https://drive.google.com/open?id=1ouJi2g5uFeE-8i93OeNTvz3XpypwyqAo