[Jan 03, 2022] Fast2test NS0-161 Exam Practice Test Questions (Updated 62 Questions)
Pass Network Appliance NS0-161 Exam Info and Free Practice Test
Introduction to Network Appliance NS0-161: NetApp Certified Data Administrator ONTAP Exam
ONTAP SAN, Swapped FC fabrics, Ethernet iSCSI/FCoE implementations, various organizational systems (Windows, LINUX, ESX, UNIX) and software have proved your ability in planning, executing, integrating, and troubleshooting.
NCIE - ONTAP logos and credentials, SAN Expert, and NetApp Certified Deployment Engineer-San NS0-161 credential will be awarded to persons who have successfully earned NetApp Certified Data Administrator, ONTAP certification (NCDA ONTAP ).
NCIE-SAN Specialist, E-Series logos, and certificates will be granted to those individuals who successfully pass the NetApp Certified NS0-161 exam. Candidates for NS0-161 exam dumps are seeking to understand fundamental concepts of cloud administration.
How to Prepare for Network Appliance NS0-161: NetApp Certified Data Administrator ONTAP Exam
Preparation Guide for Network Appliance NS0-161: NetApp Certified Data Administrator ONTAP Exam
Introduction
NetApp had its start way back in 1992 when accessing the internet meant dialing up and hearing beeps, crackles, and beeps. By tech industry norms we have seen it all and we have not only survived, but we've also thrived. We held our attention on one issue, namely the details. The controlled, collected, analyzed, secured, and transferred infrastructure continues to be enhanced. This NS0-161 exam test Certification helps a candidate to validates his skills in cloud administration.
They have succeeded in changing and rising with various cycles of transformation across history. We ran to those waves and ran like Kelly Slater. Our approach still allows our consumers to take full advantage of the opportunities of emerging technology, from the expansion of the Internet to the support for big businesses in the vertical markets, and the implementation of new systems. And we are based today in collaboration with the world's top vendors on unlocking the latest in the cloud. Of course, even more tides of transition will fill the future. We will run to them, adapt, and grow our experience, and make it easier for others to appreciate their journey.
In this guide, we will cover the NS0-161 practice exams, Expert Certified professional salary, and all aspects of the NS0-161 practice test.
NEW QUESTION 34
Click the Exhibit button.
An administrator needs to configure ports for peering. Referring to the exhibit, which ports should be used?
- A. CDOT93-01:e0a and CDOT93-02:e0a
- B. CDOT93-01:e0f and CDOT93-02:e0f
- C. CDOT93-01:e0d and CDOT93-02:e0d
- D. CDOT93-01:e0e and CDOT93-02:e0e
Answer: D
NEW QUESTION 35
Click the Exhibit button.
Referring to the exhibit, to where will LIF4 move if you unplug the cable from node02 port e0d?
- A. node01 port e0d
- B. node01 port e0c
- C. node02 port e0c
- D. node02 port e0d
Answer: C
NEW QUESTION 36
You want to improve the write performance of NL-SAS volumes serving data on your ONTAP. You also want to keep the performance consistent during a possible controller failover.
In this scenario, which feature do you use? (Choose the best answer.)
- A. Flash Pool
- B. FlexCache
- C. FabricPool
- D. Flash Cache
Answer: D
NEW QUESTION 37
A customer is complaining about performance and wants to improve the latency for vol01.
Referring to the exhibit, what is affecting the performance?
- A. the cluster
- B. the network
- C. a QoS policy
- D. a disk
Answer: C
NEW QUESTION 38
Which FabricPool policy would you apply only on a SnapMirror destination volume?
- A. backup
- B. manual
- C. destination
- D. auto
Answer: A
NEW QUESTION 39
An administrator created an SVM for a VMware vSphere 6.5 cluster. For the SVM, the NFS protocol was enabled. Data LIFs were configured with jumbo frames. The nfs01 volume was created and mounted as junction path / nfs01. A VMware export policy that allowed all the hosts of the cluster was applied to the SVM.
However, the hosts are unable to mount the volume. In this scenario, what caused the problem?
- A. The volume is not thin provisioned.
- B. NFS v3 is not compatible with ESXi hosts.
- C. The default export policy needs to allow reads from the ESXi hosts.
- D. The maximum transmission unit (MTU) was not set properly on the ESXi hosts.
Answer: D
NEW QUESTION 40
Click the Exhibit button.
Referring to the exhibit, which volume has a snap reserve value set to zero (0)? (Choose the best answer.)
- A. netapp_n01
- B. netapp_esx_m1
- C. netapp_lnx_m1
- D. netapp_esx
Answer: C
Explanation:
When creating volumes that contain LUNs, you should set the percentage of space reserved for Snapshot copies to zero. Setting space reserve to zero ensures that there are no Snapshot copies for the volume containing LUNs.
NEW QUESTION 41
What are two advantages of creating small RAID groups inside an aggregate? (Choose two.)
- A. additional available spare drives
- B. shorter reconstruction time
- C. decreased risk of multiple disk failure
- D. maximized storage space
Answer: B,C
NEW QUESTION 42
Which two statements are true for mailbox disks per node in an HA pair? (Choose two.)
- A. Eight disks are required if the root volume is on partitioned disks.
- B. Four disks are required if the root volume is on a mirrored aggregate.
- C. One array LUN is required if the root volume is on a storage array.
- D. Six disks are required if the root volume is on a mirrored aggregate.
- E. Two disks are required if the root volume is on a disk shelf.
Answer: C,E
NEW QUESTION 43
What are three firewall policies? (Choose three.)
- A. data
- B. cluster
- C. node
- D. mgmt
- E. intercluster
Answer: A,D,E
NEW QUESTION 44
Node A has taken over Node B.
You solved the issue that caused the takeover and are now ready to resume normal operation.
After initiating the storage failover giveback command, how are the aggregates given back?
- A. SFO aggregates are automatically given back, CFO aggregates must be manually given back.
- B. The root aggregate is automatically given back, CFO and SFO aggregates must be manually given back.
- C. CF0 aggregates are automatically given back, SFO aggregates must be manually given back.
- D. CFO aggregates and SF0 aggregates are automatically given back.
Answer: D
NEW QUESTION 45
Click the Exhibit button.
A customer has an issue with performance on an NVMe solution. The SVM is using all four ports shown in the exhibit.
In this scenario, how would the customer improve the host performance? (Choose the best answer.)
- A. Remove support of the FC protocol and only use NVMe.
- B. Move some of the network interfaces from 2a to 2c and 2d.
- C. Move all of the network interfaces to port 2a.
- D. Change the SFP+ in the controllers from 32 Gbps to 64 Gbps.
Answer: B
NEW QUESTION 46
What is the default RAID policy for aggregates created with 10 TB disk drives?
- A. RAID-DP
- B. RAID4
- C. RAID-TEC
- D. RAIDO
Answer: C
NEW QUESTION 47
You have an ONTAP cluster that is running a FlexGroup that is serving SMB data out to various users. One of the users receives an error when trying to modify an existing file.
What is the cause of the problem?
- A. The aggregate is full
- B. The constituent is full
- C. The FlexGroup is full
- D. The FlexGroup is offline
Answer: B
NEW QUESTION 48
You are creating a CIFS-based SVM, but the SVM cannot join the domain.
In this scenario, which two actions would be helpful in troubleshooting the problem? (Choose two.)
- A. Verify that the data LIF can access the Active Directory domain controller.
- B. Verify that the cluster admin account is used to join the Active Directory.
- C. Verify that each node has a data LIF.
- D. Verify that the clocks are synchronized between the SVM and the domain controller.
Answer: A,C
NEW QUESTION 49
......
Pass Your Network Appliance Exam with NS0-161 Exam Dumps: https://www.fast2test.com/NS0-161-premium-file.html