Practice Examples and Dumps & Tips for 2021 Latest NS0-161 Valid Tests Dumps
Latest [Oct 30, 2021] 100% Passing Guarantee - Brilliant NS0-161 Exam Questions PDF
Introduction to Network Appliance NS0-161: NetApp Certified Data Administrator ONTAP Exam
ONTAP SAN, Swapped FC fabrics, Ethernet iSCSI/FCoE implementations, various organizational systems (Windows, LINUX, ESX, UNIX) and software have proved your ability in planning, executing, integrating, and troubleshooting.
NCIE â ONTAP logos and credentials, SAN Expert, and NetApp Certified Deployment Engineer-San NS0-161 credential will be awarded to persons who have successfully earned NetApp Certified Data Administrator, ONTAP certification (NCDA ONTAP ).
NCIE-SAN Specialist, E-Series logos, and certificates will be granted to those individuals who successfully pass the NetApp Certified NS0-161 exam. Candidates for NS0-161 dumps are seeking to understand fundamental concepts of cloud administration.
For more info read reference:
Network Appliance NS0-161 Certification leaning site Network Appliance NS0-161 Certification resources
NEW QUESTION 28
A storage administrator currently has an 8-node FAS8200 cluster with CIFS, NFS, and iSCSI licenses installed.
In this scenario, how many additional nodes are supported?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 29
A storage administrator has a single-node FAS cluster. The administrator wants to add a second node to convert the FAS storage array into a switchless cluster. In this scenario, what would the administrator do to accomplish the task?
- A. Add a new single node FAS controller of the same model.
- B. Add a cluster interconnect switch and a second FAS of the same model.
- C. Add a new single node AFF controller to the existing FAS storage array.
- D. Add a new AFF HA pair and replace the existing FAS.
Answer: A
NEW QUESTION 30
Click the Exhibit button.
You are planning to present storage to your servers from your AFF system using FC protocol. You have a pair of FC switches to ensure connectivity and you have decided to use WWPN zoning.
Referring to the exhibit, which two WWPNs do you use for your configuration? (Choose two.)
- A. 0d WWPN
- B. fc-1 WWPN
- C. 0c WWPN
- D. fc-2 WWPN
Answer: B,D
NEW QUESTION 31
Your customer has an NTFS volume that they want to access over both SMB and NFS. The client explains that SMB access works fine, but the clients are unable to NFS mount the volume.
What are three reasons that would cause this issue? (Choose three.)
- A. There is no export-policy rule for the NFS clients.
- B. The volume security style must be changed to UNIX.
- C. The NSF server is not configured.
- D. Multi-protocol is not licensed on the cluster.
- E. The LIF data protocol does not allow NFS.
Answer: A,B,C
NEW QUESTION 32
Which failover policy is set by default on an iSCSI LIF?
- A. broadcast-domain-wide
- B. sfo-partner-only
- C. disabled
- D. local-only
Answer: D
NEW QUESTION 33
Click the Exhibit button.
The exhibit shows a Windows 2019 server with two FC HBAs using ALUA.
How many paths to LUN1 are active/optimized? (Choose the best answer.)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 34
What are three types of licenses available for ONTAP? (Choose three.)
- A. system
- B. standard
- C. field
- D. site
- E. evaluation
Answer: B,D,E
NEW QUESTION 35
Click the Exhibit button.
Your ONTAP 9.7 cluster failed a security audit on the management control plane. Your network security team asked you to allow only cluster1 and SVM1 management on the 192.168.1.0/24 subnet.
In this scenario, where do you apply the default-management service policy shown in the exhibit? (Choose the best answer.)
- A. LIF
- B. firewall
- C. DNS
- D. port
Answer: A
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-8104668A-72AF-4A3D-9B14-1E01112ADD47.html
NEW QUESTION 36
Click the Exhibit button.
You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN. The network administrator has configured the switch port as an access (untagged) port on VLAN 1 and says that the VLAN is non-routed.
Referring to the exhibit, what would you do to troubleshoot this problem? (Choose the best answer.)
- A. Reconfigure the LIF to be on port e0c.
- B. Verify that there is not IP address conflict on the network.
- C. Verify that the network cabling is working properly.
- D. Add a default gateway.
Answer: A
NEW QUESTION 37
You are setting up replication between two clusters.
In this scenario, which two components are required to set up the cluster peering? (Choose two.)
- A. An intercluster LIF on only the epsilon node.
- B. An intercluster LIF on every node.
- C. ICMP service between clusters.
- D. DNS service on each cluster.
Answer: B,C
Explanation:
Explanation/Reference: https://thinksystem.lenovofiles.com/storage/help/topic/ontap_cluster_peering_express_guide/ M_27021470-BC22-4640-923C-8BD12CE66360_.pdf
NEW QUESTION 38
You have a volume storing a large number of 1KB to 2KB compressed zip files.
In this scenario, which storage efficiency feature should you use?
- A. secondary compression
- B. deduplication
- C. data compaction
- D. adaptive compression
Answer: C
NEW QUESTION 39
Click the Exhibit button.
The volumes shown in the exhibit, vol1 and vol2, are in the same AFF aggregate. You write the same large 100 GB file to both vol1 and vol2.
Based on the volume efficiency settings, which action occurs? (Choose the best answer.)
- A. The files are deduplicated at the SVM level by SVM1.
- B. The files are queues for a background deduplication schedule.
- C. The files are deduplicated at the aggregate level.
- D. The files are deduplicated at the volume level.
Answer: C
Explanation:
https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-vsmg%2FGUID-B648F44B-AEC5-4F26-B2B0-0EB6CF31A4DE.html
NEW QUESTION 40
You want to establish a SnapMirror relationship between two clusters.
In this scenario, which two actions must you perform to accomplish this task? (Choose two.)
- A. Peer the nodes.
- B. Peer the volumes.
- C. Peer the clusters.
- D. Peer the SVMs.
Answer: B,D
NEW QUESTION 41
Two 100 GB space-reserved LUNs and one 100 GB non-space-reserved LUN were created in System Manager in a 1 TB volume.
In this scenario, how much space has been allocated for writes to the three LUNs?
- A. 300 GB
- B. 100 GB
- C. 1 TB
- D. 200 GB
Answer: D
NEW QUESTION 42
You want to use FabricPool technology to tier SnapVault destination volumes to the capacity tier.
In this scenario, which action would you perform to accomplish this task?
- A. Create both the source and destination volumes on a standard aggregate and assign the backup tiering policy to the destination volume.
- B. Create the destination volume on the FabricPool-enabled aggregate and assign the backup tiering policy to the destination volume.
- C. Create the source volume on the FabricPool-enabled aggregate and assign the backup tiering policy to the source volume.
- D. Create both the source and destination volumes on the FabricPool-enabled aggregate and assign the backup tiering policy to the source volume.
Answer: D
NEW QUESTION 43
......
NS0-161 are Available for Instant Access: https://www.fast2test.com/NS0-161-premium-file.html