[Mar 23, 2023] Free CCNP Data Center 300-610 Official Cert Guide PDF Download
Cisco 300-610 Official Cert Guide PDF
NEW QUESTION 44
An architect needs vendor-agnostic technology to orchestrate and automate a customer network with scripts. The technology must support running ad-hoc scripts from the CLI and support a deployment of scripts based on a large, readily available set of support libraries. Which technology must the architect choose?
- A. Cisco Intersight
- B. Cisco Power Tool
- C. Python
- D. Puppet
Answer: D
NEW QUESTION 45
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 46
An engineer finishes the initial set up of a VXLAN EVPN network. The engineer is asked to plan for connectivity that supports redundancy and extends multiple virtual routing and forwarding domains. The requirement is to use the same default gateway addressing across all leaf switches that belong to the VXLAN network. Which two solution must be used to meet these requirements? (Choose two)
- A. VRF-lite
- B. spanning tree protocol
- C. Inter-site network
- D. DC interconnect
- E. Distributed anycast gateway
Answer: D,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/products/collateral/switches/nexus-9000-series-switches/white-paper-c11-739942.html
NEW QUESTION 47
An engineer is expanding an existing iSCSI environment and must choose an addressing scheme. When checking one of the devices, the engineer discovers this target device naming used:
{prefix}.2019-01.com.acme123:00.ffd0cb21.bcb392817521
Which addressing scheme was used in the environment?
- A. Fibre Channel ID
- B. Extended Unique Identifier
- C. iSCSI Qualified Name
- D. Network Address Authority
Answer: B
NEW QUESTION 48
Which type of encoding is used on 8-Gbps links as compared to 10-Gbps links?
- A. 8-Gbps links and 10-Gbps links use 8B/10B encoding.
- B. 8-Gbps links use 64B/66B encoding, and 10-Gbps links use 8B/10B encoding.
- C. 8-Gbps links use 8B/10B encoding, and 10-Gbps links use 64B/66B encoding.
- D. 8-Gbps links and 10-Gbps links use 64B/66B encoding.
Answer: C
Explanation:
Section: Compute Design
Explanation/Reference: https://www.iol.unh.edu/sites/default/files/knowledgebase/10gec/10GbE_Cl49.pdf
NEW QUESTION 49
DRAG DROP
Drag and drop the technologies from the left onto the correct descriptions on the right.
Select and Place:
Answer:
Explanation:
Section: Storage Network Design
NEW QUESTION 50
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION 51
Which multicast rendezvous point redundancy mode is valid for Bidirectional PIM?
- A. PIM anycast RP
- B. MSDP
- C. Phantom RP
- D. Embedded RP
Answer: A
NEW QUESTION 52
A company has several data centers around the world that must be interconnected over Layer2. The service provider supports MPLS services to all the locations. The proposed solution must be vendor agnostic and scalable enough to support the rapid growth of the company. Which data center technology is recommended to achieve this goal?
- A. EoMPLS
- B. VXLANEVPN
- C. FabricPath
- D. OTV
Answer: B
NEW QUESTION 53
An end user is experiencing network latency when accessing a database in a disaster recovery site. The monitoring team concluded that the database was writing simultaneously to the storage arrays on the primary and disaster recovery sites.
Which design resolves this issue?
- A. FCIP tunneling between data center
- B. asynchronous replication between data centers
- C. synchronous replication between data centers
- D. FCoE tunnel between data center
Answer: B
NEW QUESTION 54
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION 55
A company has several data centers with hundreds of Cisco UCS blade chassis. A network consultant plans to active Cisco Discovery Protocol to the servers to facilitate Layer 1 troubleshooting. For security reasons, the company wants to restrict the servers from sending different MAC addresses to the fabric interconnect after the MAC address from the first packet is learned. Which two policies be modified to support this design? (Choose two.)
- A. Network Control Policy
- B. vNIC Policy
- C. vNIC Template Policy
- D. Ethernet Adapter
- E. Pin Group Policy
Answer: A,C
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Network-Mgmt/4-0/b_UCSM_Network_Mgmt_Guide_4_0/b_UCSM_Network_Mgmt_Guide_4_0_chapter_01010.html
https://jeremywaldrop.wordpress.com/2010/05/03/how-to-enable-cdp-on-cisco-ucs-vnics/
NEW QUESTION 56
Which two methods mitigate congestion in a SAN network? (Choose two.)
- A. Configure the port channel to enable individual buffer-to-buffer credits.
- B. Configure ER_RDY to allow splitting of each ISL between switches into separate virtual links.
- C. Configure the port monitor to allow categorization of a specific device as slow.
- D. Configure the flow control for the FC to use R_RDY.
- E. Use the port-monitor command to detect slow drain devices.
Answer: C,E
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/interfaces/ cisco_mds9000_interfaces_config_guide_8x/congestion_avoidance_isolation.html
NEW QUESTION 57
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION 58
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION 59
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. number of vHBAs
- B. target server
- C. UUID assignment
- D. VXLAN membership
- E. ARP entries
Answer: A,C
NEW QUESTION 60
DRAG DROP
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Select and Place:
Answer:
Explanation:
Section: Compute Design
NEW QUESTION 61
The management of the Cisco Nexus switches is provided over an isolated put-of-band network. The VDC feature is configured on the Cisco Nexus core switches. How is out-of-band management access provided for each VDC?
- A. All the VDC have the same out-of-band IP address.
- B. Each VDC has a unique out-of-band IP address from the same IP subnet.
- C. Each VDC has a unique out-of-band IP address from different IP subnets among VDCs.
- D. Each VDC has a dedicated out-of-band Ethernet management port.
Answer: B
Explanation:
Section: Network Design
NEW QUESTION 62
Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?
- A. NPV mode
- B. FC end-host mode
- C. FC switching mode
- D. NPIV mode
Answer: C
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/ Storage-Mgmt/3-1/b_UCSM_GUI_Storage_Management_Guide_3_1/ b_UCSM_GUI_Storage_Management_Guide_3_1_chapter_01110.html
NEW QUESTION 63
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION 64
Which orchestration tool should be used for the management and analytics of servers across multiple sites?
- A. Cisco Intersight
- B. Cisco UCS Manager
- C. Cisco Data Center Network Manager
- D. Cisco Nexus Fabric Manager
Answer: A
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/en_in/products/servers-unified-computing/intersight/index.html
NEW QUESTION 65
......
Cisco 300-610 Exam Certification Details:
| Recommended Training | Designing Cisco Data Center Infrastructure (DCID) |
| Duration | 90 minutes |
| Exam Code | 300-610 DCID |
| Exam Registration | PEARSON VUE |
| Exam Name | Designing Cisco Data Center Infrastructure |
| Sample Questions | Cisco 300-610 Sample Questions |
| Passing Score | Variable (750-850 / 1000 Approx.) |
3. Storage Network Design
- Weightage allotted – 20%
The principal focus of this part of the exam content is on skills related to iSCSI deployment in a given data center ecosystem and QoS requirements, including the use of Fibre Channel, FCoE, FCIP, and iSCSI. Then, the applicants should have a solid understanding of the key ways to determine FCoE along with Fibre Channel interface. This involves the concepts of oversubscription, the type of ports, shared and dedicated modes, and ISL. SAN topology options are also included in this section.
Which Skills Are Covered in the Exam?
This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:
1. Network Design
- Weightage allotted – 35%
This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.
Free 300-610 Exam Dumps to Improve Exam Score: https://www.fast2test.com/300-610-premium-file.html
Exam 300-610: New Brain Dump Professional - Fast2test: https://drive.google.com/open?id=1nUDkJpycfA03s_ubg4oLuwAtKJBt6RAO