Pass Juniper JN0-611 exam questions - convert Test Engine to PDF
Pass Your JN0-611 Exam Easily - Real JN0-611 Practice Dump Updated Aug 15, 2023
NEW QUESTION # 13
In a Contrail multicloud environment with Azure and AWS cloud, which two components must be provisioned? (Choose two.)
- A. multicloud gateway
- B. Contrail Controller
- C. Contrail analytic database
- D. AppFormix node
Answer: B,C
NEW QUESTION # 14
Which two roles does Contrail Enterprise Multicloud place on IP Fabric devices in a Unicast edge- routed environment? (Choose two.)
- A. The leaves are Layer 2 VXLAN gateways.
- B. The spines are Layer 2 VXLAN gateways.
- C. The leaves are Layer 3 VXLAN gateways.
- D. The spines are Layer 3 VXLAN gateways.
Answer: B,D
NEW QUESTION # 15
In an OpenShift deployment, you want to have Contrail's CNI plugin create tag-based firewall policies in an automated fashion. Which action should be performed in this scenario?
- A. Use the kubect1 scale --replicas=3 rs/foo command.
- B. Use the kubect1 apply -f network-policy.yaml command.
- C. Use the kubect1 delete -f ./pod. json command.
- D. Use the kubect1 autoscale deployment foo --min=2 --max=10 command.
Answer: A
NEW QUESTION # 16
Referring to the exhibit, which statement is correct about the configuration for the service chain?
- A. The service chain has an allowed address pair on the interfaces.
- B. The service chain is set up for active/standby.
- C. The service chain is using a customized ECMP load balancer.
- D. The service chain is using a default setup.
Answer: B
NEW QUESTION # 17
Contrail Virtual Network corresponds to which entity in VMware vCenter?
- A. standard virtual switch
- B. distributed virtual switch
- C. distributed port group
- D. standard port group
Answer: B
NEW QUESTION # 18
Referring to the exhibit, three microservices are deployed in an OpenShift cluster, each in a separate OpenShift project. The Web pod exposes the Web front end through a service. The App pod exposes an application API through a second service. You are asked to assign Web services external IP addresses out of the 100.64.0.0/24 subnet, and the App AIP external IP addresses from the 100.64.128.0/24 subnet.
How would you accomplish this task?
- A. Use an OpenShift network policy applied to each of the exposed microservices.
- B. Apply the opencontrail.org/fip-pool annotation to each project namespace.
- C. Configure a namespace isolation policy.
- D. Use a Contrail network policy to match the microservice IP addresses, and advertise them to the external networks.
Answer: D
NEW QUESTION # 19
Kubernetes Service maps to which object in Contrail?
- A. the namespace-based service proxy
- B. the Contrail service appliance-based load balancer
- C. the HAProxy-based load balancer
- D. the native load balancer implemented using vRouter
Answer: B
NEW QUESTION # 20
You are deploying Contrail Enterprise Multicloud in your environment. You must securely connect your private resources with publicly-hosted resources.
What must be included in this scenario?
- A. AppFormix
- B. Multicloud-Gateway
- C. Contrail Security
- D. service chaining
Answer: B
NEW QUESTION # 21
Service instance SI2 is performing source NAT using Ihe pool of addresses shown in the exhibit.
You are verifying connectivity by sending ICMP traffic from the G1 host to the R1 host. You notice that the ICMP requests are received on R1, but the ICMP responses are not received on the G1 host.
In this scenario, what would solve this problem?
- A. You must add a static route table to SI2.
- B. You must add static routes to the VMs in the Right VN.
- C. Apply a network policy to allow traffic from the Left VN toward the Right VN.
- D. You must add static routes to the VMs in the Left VN.
Answer: C
NEW QUESTION # 22
Your company has integrated Contrail with its VMware installation. In this scenario, which two steps are needed to create a virtual network and launch a virtual machine? (Choose two.)
- A. Create a virtual network using the Contrail Classic Ul.
- B. Create a virtual network using Contrail Command.
- C. Create a virtual machine using Contrail Command.
- D. Create a virtual machine using the vCenter Ul.
Answer: A,C
NEW QUESTION # 23
Contrail security tags and their values in AWS multicloud deployments are evaluated in which order?
- A. virtual network, project, virtual machine interface, and virtual machine
- B. virtual machine, project, virtual network, and virtual machine interface
- C. virtual machine interface, virtual machine, virtual network, and project
- D. project, virtual network, virtual machine, and virtual machine interface
Answer: D
NEW QUESTION # 24
Referring to the exhibit. You successfully run the Ansible playbook shown in the exhibit. However, you are unable to see the instances you created.
What is the problem in this scenario?
- A. You are viewing the correct region in the wrong VPC.
- B. Your s3 bucket was not accessible during the deployment.
- C. You have incorrectly entered your key information.
- D. You are viewing the wrong region.
Answer: C
NEW QUESTION # 25
You are asked to implement a diverse set of secure tunnel solutions between two locations using a virtual SRX. You are responsible for managing resource usage and must decide whether to use the vSRX or cSRX device.
Which statement is true in this scenario?
- A. You should use the cSRX, the cSRX uses more resources; however, it encrypts data faster than the vSRX.
- B. You should use the vSRX, the vSRX uses less resources and it encrypts data faster than the cSRX.
- C. You should use the cSRX, the cSRX uses less resources and it offers the same feature set as the vSRX.
- D. You should use the vSRX, the vSRX uses more resources; however, it performs all required IPsec functions.
Answer: A
NEW QUESTION # 26
You are using Contrail integrated with Kubernetes.
In this scenario, which Kubernetes service is replaced with the Contrail vRouter for dataplane processing?
- A. kube-scheduler
- B. kube-proxy
- C. kubelet
- D. kube-controller-manager
Answer: C
NEW QUESTION # 27
Which two roles does Contrail Enterprise Multicloud place on IP Fabric devices in a centrally- routed environment? (Choose two.)
- A. Leaves are Layer 2 VXLAN gateways.
- B. Spines are Layer 3 VXLAN gateways.
- C. Leaves are Layer 3 VXLAN gateways.
- D. Spines are Layer 2 VXLAN gateways.
Answer: A,C
NEW QUESTION # 28
Which statement is correct about Contrail Enterprise Multicloud (CEM)?
- A. CEM can only connect to BMS and VM resource workloads.
- B. CEM can only manage network overlay functions.
- C. CEM can only be used to connect private clouds together.
- D. CEM can connect any type of cloud environment.
Answer: C
NEW QUESTION # 29
Which statement is correct about service chaining?
- A. All hosts must be in the same network subnet.
- B. Service chaining is always Layer 2 based.
- C. The right service interface is always the ingress for traffic.
- D. All traffic entering the left interface must exit the right interface.
Answer: C
NEW QUESTION # 30
You are using the default mode for your Kubernetes cluster in your Contrail Enterprise Multicloud environment. In this scenario, which statement is correct?
- A. Communication between all pods is isolated to each specific namespace that is spawned in the Kubernetes cluster.
- B. All communication between all pods must be explicitly defined in the Kubernetes cluster.
- C. All pods are restricted to using only services that are defined under the default namespace.
- D. All pods in all namespaces that are spawned in the Kubernetes cluster can communicate with one another.
Answer: D
NEW QUESTION # 31
Your customer wants to attach a server to four leaf nodes for redundancy. They also want to bundle all four links in a LAG for load-balancing of traffic. The customer is using Contrail Command to manage their underlay and overlay networks.
Which statement is correct in this scenario?
- A. Create an MC-LAG that incorporates all four leaf nodes.
- B. Use EVPN and configure all-active mode for the Ethernet segment.
- C. LAGs with more than two leaf nodes are not configurable.
- D. Use EVPN and configure single-active mode for the Ethernet segment.
Answer: A
NEW QUESTION # 32
You are considering different designs for your Contrail Enterprise Multicloud installation. Several designs have been submitted.
Referring to the exhibit, which design model does this represent?
- A. centrally-routed bridging overlay
- B. bridged overlay
- C. routed overlay using EVPN Type 6 routes
- D. edge-routed bridging overlay
Answer: B
NEW QUESTION # 33
Referring to the exhibit, which statement is true about virtual networks A and B so that the vSRX can be used as a service instance in a transparent service chain?
- A. Virtual networks A and B must have different CIDR addressing.
- B. Virtual networks A and B must have the same CIDR addressing.
- C. Virtual networks A and B must be running on different host servers.
- D. Virtual networks A and B must be running on the same host server.
Answer: A
NEW QUESTION # 34
Into which namespace are the Contrail system components deployed in an OpenShift cluster?
- A. networking
- B. contrail-system
- C. openshift-sdn
- D. default
Answer: D
NEW QUESTION # 35
Users mention that an application has network connectivity issues orchestrated by Kubernetes.
To troubleshoot the issue, you must obtain the IP addresses of the pods used by the application.
In this scenario, which command will accomplish this task?
- A. kubect1 explain pods
- B. kubect1 config view
- C. kubect1 describe pods
- D. kubect1 get services
Answer: B
NEW QUESTION # 36
......
JN0-611 Real Exam Questions and Answers FREE: https://www.fast2test.com/JN0-611-premium-file.html