Free Sales Ending Soon - Use Real D-PEMX-DY-23 PDF Questions [Oct 25, 2024]
Updated Oct-2024 Exam D-PEMX-DY-23 Dumps - Pass Your Certification Exam
NEW QUESTION # 25
Which three components are required in an MX7000 chassis to allow multiple compute sleds to share access to the same disks in an MX5016s enclosure?
(Select 3)
- A. MX5000s IOM
- B. Drive-assigned storage configuration
- C. Cluster-aware Operating System
- D. HBA 330MMZ
- E. PERC H745PMX
Answer: B,C,D
NEW QUESTION # 26
Where in the OME-M Web interface can the Chassis Deployment Wizard be found?
- A. Home > Configure > Initial Configuration
- B. Home > Settings > Chassis Deployment Wizard
- C. Configuration > Deploy > Chassis Deployment Wizard
- D. Hardware > Initial Configuration
Answer: A
NEW QUESTION # 27
Which protocol(s) does Redfish use?
- A. JSON only
- B. OData only
- C. JSON, OData, and SNMP
- D. JSON and OData only
Answer: D
NEW QUESTION # 28
The MX9116n FSE has two single-density QSFP28 port groups, and the default setting for these two ports is 1x 100GbE.
What other Ethernet breakout configurations are supported?
- A. 4x 16 Gb
2x 32 Gb
4x 25GbE
2x 50GbE - B. 4x 10GbE
1x 40GbE
8x 25GbE
2x 50GbE - C. 4x 10GbE
1x 40GbE
4x 25GbE
2x 50GbE - D. 4x 10GbE
1x 40GbE
4x 8 Gb
4x 32 Gb
Answer: C
NEW QUESTION # 29
What is the number of server-facing ports and the bandwidth of each port on the MXG610s?
(Choose two.)
- A. 16x 32 Gbps
- B. 8x 32 Gbps
- C. 8x 16 Gbps
- D. 16x 16 Gbps
Answer: A,D
NEW QUESTION # 30
A system administrator must interface the compute sleds of an MX7000 chassis to a Z9432F-ON in a single SmartFabric.
Which FEM IOM is required?
- A. MX9116n
- B. MX8116n
- C. MX5108n
- D. MX7116n
Answer: B
NEW QUESTION # 31
What compute sled model best supports the following requirements?
4 Node Database Cluster Heavy transactional workload 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space Maximum of 200,000 IOPS
- A. 4 x MX840C 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space based on SAS SSD Drives - B. 8 x MX740C 16 Processors
16 TB of DDR4 Memory
50 TB of Disk Space based on SAS SSD Drives - C. 4 x MX840C 16 Processors
24 TB of DDR4 Memory
40 TB of Disk Space based on NVMe Drives - D. 8 x MX750C 16 Processors
16 TB of DDR4 Memory
45 TB of Disk Space based on NVMe Drives
Answer: C
NEW QUESTION # 32
An administrator is connecting two MX840c to an MX5016s. The MX5016s is configured in Enclosure Assigned mode.
What should the requirements of this mode be to avoid configuration issues?
- A. HBA330MMZ with no OS restrictions
- B. HBA330MMZ with a cluster aware OS
- C. MX745P with a cluster aware OS
- D. MX745P with no OS restrictions
Answer: B
NEW QUESTION # 33
An MX7000 administrator has been tasked to create a Scalable Fabric Architecture on a 3 chassis setup using Fabric B.
Which IOM configuration is recommended?
- A. Chassis 1 - Slot B1: MX9116n; Slot B2: MX5108nChassis 2 - Slot B1: MX5108n; Slot B2: MX9116n Chassis 3 - Slot B1: MX5108n; Slot B2: MX5108n
- B. Chassis 1 - Slot B1: MX7116n; Slot B2: MX7116nChassis 2 - Slot B1: MX7116n; Slot B2: MX7116n Chassis 3 - Slot B1: MX9116n; Slot B2: MX9116n
- C. Chassis 1 - Slot B1: MX9116n; Slot B2: MX9116nChassis 2 - Slot B1: MX5108n; Slot B2: MX5108n Chassis 3 - Slot B1: MX5108n; Slot B2: MX5108n
- D. Chassis 1 - Slot B1: MX9116n; Slot B2: MX7116nChassis 2 - Slot B1: MX7116n; Slot B2: MX9116n Chassis 3 - Slot B1: MX7116n; Slot B2: MX7116n
Answer: C
NEW QUESTION # 34
Which controller option the mapping of an entire MX5016s to multiple compute sleds?
- A. H745 Jumbo PERC
- B. PERC H730 only
- C. HBA330 and PERC H730
- D. HBA330 only
Answer: D
NEW QUESTION # 35
What item is used to refer to a daisy-chained configuration of a multiple MX7000 chassis environment?
- A. Physical group
- B. Identity group
- C. Chassis group
- D. Wired group
Answer: D
NEW QUESTION # 36
While servicing an MX7000 chassis a system administrator logs into OME-M and receives a Chassis Mismatch error.
What should be the next step taken by the administrator?
- A. Reset Peer or the Local IOM
- B. Force Active/Clear configuration
- C. Perform firmware update
- D. Clear the configuration
Answer: B
NEW QUESTION # 37
What type of connection is used by QuickSync 2?
- A. Bluetooth
- B. NFC
- C. QuickAssist
- D. LTE
Answer: A
NEW QUESTION # 38
What is a benefit of using scalable fabric architecture in the MX7000?
- A. Management of all servers and fabrics is done from the last chassis in the fabric
- B. Management of all fabrics is done from the last chassis in the fabric
- C. Management of all fabrics is done from the third fabric in the chassis
- D. Management of all servers and fabrics is done from the lead chassis
Answer: D
NEW QUESTION # 39
Once power is applied to the chassis, what is the next sequence after MM completes booting?
- A. 12 V DC Rail on.
- B. PSU firmware starts.
- C. MM uboot starts.
- D. Load the LCD panel.
Answer: D
NEW QUESTION # 40
......
D-PEMX-DY-23 Dumps To Pass Dell Server Exam in One Day: https://www.fast2test.com/D-PEMX-DY-23-premium-file.html
Latest Real EMC D-PEMX-DY-23 Exam Dumps Questions: https://drive.google.com/open?id=1_SEMbWRtrbfeBrys19nKpDUjvdo48ch8