Real C-IBP-2105 dumps - Real SAP dumps PDF in here [Feb-2022]
Realistic Fast2test C-IBP-2105 Dumps PDF - 100% Passing Guarantee
SAP IBP Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| Inventory | Optimize inventory in the supply chain utilizing algorithms that derive inventory targets. IBP100 | < 8% |
| Demand Planning | Create statistical forecast using historical data with basic methods. IBP200 (SAP IBP OD 2105), IBP600 (SAP IBP OD 2105) | 8% - 12% |
| General Configuration of a Planning Area | Display, create, copy, edit, check, and activate a planning area. IBP200 (SAP IBP OD 2105) | > 12% |
| Supply and Response | Configure supply planning, run various solvers to generate planning results IBP100, IBP110, IBP200 (SAP IBP OD 2105), IBP700 (SAP IBP OD 2105) | > 12% |
| Analytics and Reporting | Define and view information with user-defined charts and dashboards. IBP200 (SAP IBP OD 2105), IBP300 (SAP IBP OD 2105) | < 8% |
NEW QUESTION 32
Which of the following solutions are feasible when using the time series supply optimizer? Note: There are 3 correct Answers to this question.
- A. Violation of minimum aggregated inventory values
- B. Violation of minimum resource utilization
- C. Not respecting production capacity
- D. Not adhering to maximum transport values
- E. Not-fully satisfied demands
Answer: A,B,E
NEW QUESTION 33
Analytics charts are created by the user in the Advanced Analytics application. What actions are possible in the Advanced Analytics app? Note: There are 2 correct Answers to this question.
- A. Apply filters on your data.
- B. Merge charts together.
- C. Group data.
- D. Open graphics in Excel.
Answer: A,C
NEW QUESTION 34
What are S&OP operator (optimizer) parameters associated with demand fair share?
- A. Number of fair share segments. Additional tiering costs (default). Target inventory violation cost
- B. Number of fair share segments. Maximum days of coverage. Number of fair share segments late delivery
- C. Number of fair share segments. Additional tiering costs (default). Number of fair share segments late delivery
- D. Number of fair share segments. Maximum inventory. Additional tiering costs (default)
Answer: C
NEW QUESTION 35
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?
- A. By restricting data input in the Key Figure Configuration app
- B. IBP -> Lock Selected cells in IBP Formatting Sheet tab
- C. Select Protect Active Worksheet in the About section of SAP IBP tab
- D. IBP -> Data Validation in IBP Formatting Sheet tab
Answer: A
NEW QUESTION 36
What does ABC/XYZ segmentation allow you to do? Note: There are 2 correct Answers to this question.
- A. Identify inventory items that require closer attention.
- B. Assign more appropriate inventory algorithms to planning objects.
- C. Analyze forecast accuracy by product class.
- D. Tailor your forecast strategy and inventory optimization to segment characteristics.
Answer: C,D
NEW QUESTION 37
Which of these conditions must be met to create a Local Member key figure?
- A. Use Excel Cell References in Report Editor is selected.
- B. Activate Local Member Recognition is selected.
- C. A key figure is created in the Planning Area app.
- D. A key figure is selected in the Key Figures tab in the Microsoft Excel add-in.
Answer: B
NEW QUESTION 38
Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.
- A. Use a subnetwork ID to reduce the size of the problem.
- B. Increase the use of incremental lot size beyond the frozen horizon.
- C. Avoid using telescopic time buckets.
- D. Split into multiple planning areas to support weekly vs. daily planning needs.
Answer: A,C
NEW QUESTION 39
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?
- A. A time profile has to be activated so that the application job can proceed.
- B. This application job can be run for multiple time profiles at once.
- C. The planning area with this time profile must be activated so that the application job can proceed.
- D. This application job cannot be scheduled for immediate start.
Answer: C
NEW QUESTION 40
Which one of the following values can you use in disaggregation expressions?
- A. If (Attribute)=0
- B. KF1 (Stored) + Helper KF
- C. KF1 (Stored) + KF2 (Stored) + Attribute
- D. KF1 (Calculated) + Attribute
Answer: A
NEW QUESTION 41
A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?
- A. IF("PERIODID5" ="$$PERIODID5CU$$...)
- B. IF("PERIODID4" ="$$PERIODID4CU$$...)
- C. IF("PERIODID2" ="$$PERIODID2CU$$...)
- D. IF("PERIODID3" ="$$PERIODID3CU$$...)
Answer: B
NEW QUESTION 42
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note: There are 2 correct Answers to this question.
- A. Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.
- B. Excess stock can be generated and will need to be staged in an overflow warehouse.
- C. Capacity leveling will be possible for production and storage resources.
- D. Enough demands can be pulled forward and pull production will occur.
Answer: A,D
NEW QUESTION 43
The Analytics Advanced app allows you to work with different types of charts. What can be the origin of the charts you can work with?
- A. Custom Alerts
- B. Dashboards Advanced
- C. Process Templates
- D. SAP IBP VBA Add-in template
Answer: D
NEW QUESTION 44
Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3 correct Answers to this question.
- A. Key figure type
- B. Attributes
- C. Modified date
- D. Scenario ID
- E. Reason code
Answer: B,C,E
NEW QUESTION 45
Which of the following checks for master data and key figures does the Check Mode algorithm trigger?
Note: There are 3 correct Answers to this question.
- A. It checks whether the sourcing in the Production Source Item Master Data type exists.
- B. It checks whether the required planning level master data exists for a subset of input key figures.
- C. It checks whether the heuristic detects cycles formed by nodes (such as location products) in the supply chain network.
- D. It checks whether the location products specified in the master data are connected by customer sourcing rules within the supply chain network.
- E. It checks whether the location resource specified in the master data forms a cycle in the supply chain network.
Answer: B,C,D
NEW QUESTION 46
What setting is mandatory in the Manage Lifecycle Planning app when introducing a new product?
- A. Define which phase-in and phase-out profiles can be used within Lifecycle Planning
- B. Define at least one attribute of the planning area which represents the Product ID
- C. Define which key figure can be used as sales history for new products
- D. Define which is the attribute ID for the Lifecycle profiles
Answer: C
NEW QUESTION 47
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Proportional disaggregation by using KF2 in the expression
- B. Disaggregation according to a user-defined expression
- C. Disaggregation in batch triggered by an application job
- D. Disaggregation according to an equal split
- E. An internal system-generated disaggregation
Answer: A,B,D
NEW QUESTION 48
Which header name displays are available in the Report Options menu of the SAP IBP Excel interface?
Note: There are 2 correct Answers to this question.
- A. Caption, as defined in configuration for the default name
- B. Full unique name including the dimension and technical name
- C. Business meaning, as defined in configuration
- D. Changed member names that the user had created
Answer: B,C
NEW QUESTION 49
You define fixing for a key figure. Which of the following functions are available for this key figure? Note:
There are 2 correct Answers to this question.
- A. Fixing is possible for manually editable key figures.
- B. Fixing is possible for a certain period, including all child values in the hierarchy.
- C. Fixing is possible for a certain quantity of a key figure value.
- D. Fixing is possible for system editable key figures.
Answer: A,B
NEW QUESTION 50
......
Verified C-IBP-2105 dumps Q&As Latest C-IBP-2105 Download: https://www.fast2test.com/C-IBP-2105-premium-file.html